Autosize / Layout/zh CN

From Lazarus wiki
Revision as of 12:18, 20 February 2020 by Robsean (talk | contribs) (锚定到同属)

English (en) русский (ru) 中文(中国大陆)‎ (zh_CN) 中文(台灣)‎ (zh_TW)

Contents

概述

LCL可以自动修改一个控件的大小和位置,以便它适应字体,主题和文本或者其它内容的更改。如果你想在一些平台上运行你的 程序,或者你的标题可以使用一些语言,你的控件需要适应它们的当前环境。LCL不仅允许你做一次快速设计(使用鼠标在一个窗体上到处移动控件) ,并且后期设置一些将使控件随后自动地适应更改控件的关键属性等等。

  • 固定设计:这是在设计器中放置一个控件的默认设置。控件的位置相对其父类控件是固定的。控件的大小和位置(左,顶)可由程序员完全调整。你可以使用鼠标四处移动控件,和自由重新调整其大小。
  • 对齐:对齐的控件将填充剩余父类控件空间顶部、底部、左侧和右侧,或者填充整个剩余空间。
  • :你可以锚定一个控件的边侧(左,顶,右,底)到它的父类组件或到另一个组件。锚定的意思:LCL将尝试维持与锚定点相同的距离。
  • 布局:控件可以在行和列中自动地对齐 (例如, TRadioGroup)
  • 通过OnResize自定义:你可以在代码中使用OnResize和OnChangeBounds事件来对齐你自己的控件。
  • 自定义控件:写你自己的控件,你可以重写(override)几乎任何你想的LCL行为。

优先级规则

  1. 约束式(Constraints)
  2. 对齐(Align)
  3. 锚(Anchors)
  4. 子控件大小.布局(ChildSizing.Layout)
  5. 自动大小(AutoSize)
  6. OnResize, OnChangeBounds - 但是,如果你设置与上述规则冲突的边界,你将创建一个死循环。

公共属性

可以更改一些重要的属性来配置自动大小:

  • Left, Top, Width, Height(左,顶,宽,高)
  • 自动大小(AutoSize):autosize通知LCL自动地重新调整一个控件的宽度和高度。
  • 锚(Anchors):让你创建依赖关系/附属关系,例如,来锚一个ComboBox到一个Label的右侧。
  • 对齐(Align)
  • 约束式(Constraints):让你为宽度和高度设置一个最小值和最大值。
  • 边界空格(BorderSpacing): 让你设置锚定控件之间的空格。
  • ChildSizing:让你设置子控件的布局和空格。

内部算法在这里解释:LCL自动大小(AutoSizing)

固定设计

固定设计是默认的。控件的属性设置为[akLeft,akTop],这意味着左侧和顶部的值没有被LCL更改。如果AutoSize的值是false,LCL不改变宽度或高度。如果AutoSize的值是true,宽度 和高度将被更改以适应内容。例如,TLabel.AutoSize默认值为true,因此将更改它的标题来将重新调整 label 大小以容纳更改的表达方式。TButton.AutoSize默认值是false,因此更改一个按钮的标题不会重新调整按钮大小。当你设置Button.AutoSize为true时,每次更改按钮的标题或它的字体(或主体),按钮将收缩或放大。注意,这些更改不总是立即发生的。例如,在FormCreate期间,所有的自动大小是挂起的。无论何时,你都可以更改"Left", "Top", "Width",或"Height"属性。

自动大小(AutoSize)

AutoSize是一个在很多类中可用找到的布尔值属性;它允许自动地调整一个控件的大小以适应顾及所含文本或图形的差异,也允许最有效地使用可用空间。这是创建跨平台窗体的关键机制。 通常地, AutoSize=true 对一个可视控件做两件事:

  • 如果有可能,它将重新调整控件的大小为首选大小。例如,一个TButton的宽度和高度被重新调整大小以适应标题,在一个TEdit仅在高度上重新调整大小的同时。一个TEdit的宽度不被自动大小。你可以更改一个TEdit的宽度。(查看GetPreferredSize)。
  • 它以相同的数量移动固定位置的子控件,以便最左侧的子控件移动到 Left=0 (取决于边界空格(BorderSpacing)),最顶部的子控件移动到 Top=0 。

Lazarus vs Delphi

  • Delphi的自动大小(AutoSize)仅当某些属性更改时发生,例如,当一个TLabel的字体更改时。LCL的自动大小(AutoSize)总是激活的。Delphi允许更改一个有AutoSize=true的Lable的大小, 而Lazarus控件不允许。
  • Delphi的隐藏的控件不会被自动大小。
  • 使用Delphi,在加载期间,更改一个控件的大小不会重新调整大小/移动锚定子控件,但是一个构造函数通常被用来制作预期效果。当使用akRight,akBottom锚时,设置AnchorSides(锚定边)和BorderSpacing(边界空格)以保持距离正确。

自动大小(AutoSize)和重新调整大小控件

使用AutoSize=false,按钮将给予一个默认的固定大小。

Autosize1.png

当为每个按钮设置 AutoSize=true 时,按钮将放大(或收缩)以适应文本和主题框架。

Autosize on.png

正如你在OK按钮中所见,AutoSize不会收缩到最小可能的尺寸大小。它使用控件的 GetPreferredSize方法,该方法调用CalculatePreferredSize方法。默认的TWinControl实施询问 widget集合,这可能有一个首选的宽度或高度。每个控件都可以重写(override) CalculatePreferredSize 方法。例如,TImage 重写(override)它,并返回图片的大小。如果没有可用的首选的宽度(高度),返回的值是0,并且LCL将保持宽度(高度) (除非ControlStyle设置标示csAutoSize0x0,当前仅TPanel使用)。

一个TWinControl计算其所有子控件的大小,并使用它来计算首选大小。

当一个控件被锚定到左侧和右侧,并且它的 宽度 是固定的。例如,使用 Align=alTop ,控件被锚定到左侧和右侧,并且沿袭父类控件的宽度。如果 Parent.AutoSize 为 true,那么 Parent 将使用控件的首选宽度来计算它自身的首选宽度,以此方式,控件将重新调整大小为它的首选宽度。查看 对齐和自动大小(AutoSize. 如果没有 可用的首选宽度,那么最后设置的边界将被使用(BaseBounds或ReadBounds)。 如果没有边界被设置,GetControlClassDefaultSize方法将被使用。Same for对于高度和锚定到顶部和底部是一样的。

约束式总是被应用,并且有优先权。

自动大小 (AutoSize)和移动子控件

当 AutoSize=false 时,你可以自由地放置和移动控件:

Autosize on.png

当 AutoSize=true 时,有固定位置的子控件将移动以适应位置。

Autosize panel on.png

在面板上是所有按钮都将通过相同的数量来移动到顶部和左侧,以便左侧和顶部没有剩余的空间。如果按钮可能有 BorderSpacing>0 或 Panel.ChildSizing.LeftRightSpacing>0 ,按钮可能被移动,以便使用定 义的空格量

仅具有下面值的子控件将被移动:

  • Anchors=[akLeft,akRight]
  • AnchorSide[akLeft].Control=nil
  • AnchorSide[akTop].Control=nil
  • Align=alNone

子控件的移动取决于属性ChildSizing.Layout。 该布局被应用于方法 TWinControl.AlignControls ,这将完全重写或部分重写 (overridden)例如,TToolBar 重写 (overridden) ControlsAligned 到所有使用 Align=alCustom 的控件的位置,并定义一个流布局,在流布局中不适合的控件将被推放到后续的行中。

控件可以通过设置ControlStyle标示csAutoSizeKeepChildLeft 和 csAutoSizeKeepChildTop (自0.9.29版本可用)来禁用子控件的移动。

自动 大小(AutoSize)和窗体

没有父类控件的窗体将被窗口管理器控制,因而不能自由地放置和重新调整大小。设置大小仅是一个建议,并且可能会被 窗口管理器忽略。例如,你可以设置一个窗体的宽度为1000, 而 widget集可能会重新调整大小为800作为回应。如果你在OnResize中设置宽度,你可能会创建一个死循环。这就是为什么当widget集重新设 置窗体大小时,LCL TForm 禁用自动大小(AutoSize)的原因。

这意味着当用户重新调整窗体大小或假设窗口管理器不喜欢边界时,窗体的自动大小(AutoSize)将停止。例 如,一些Linux窗口管理器有参照关联的其它窗口重新调整该窗体的磁性边功能。

强制一个窗体的自动大小

你可以启动/执行一次新的自动大小(AutoSize),通过这样做:

Form1.AutoSize := False;
Form1.AutoSize := True;

预先计算一个自动大小的窗体的大小

当放置一个自动大小的窗体时,你可能需要在显示该窗体前知道它的大小。自动大小需要句柄(handle)。你可以 在显示一个窗体前计算其大小,使用:

Form1.HandleNeeded;
Form1.GetPreferredSize(PreferredWidth,PreferredHeight);

注意: 窗口管理器和窗体事件可能会更改窗体大小。首先大小不包含窗体的窗口边界。这是一个计划中的功能。

Anchor Sides

Controls have four sides: akLeft, akTop, akRight and akBottom. Each side can be anchored to the parent or the side of another sibling (a control with the same parent). Anchoring means keeping the distance. The default is Anchors=[akLeft,akTop]. Vertical anchors are independent of horizontal anchors. Some properties like Align and Parent.AutoSize have higher precedence and can change the behaviour.

Anchored to Parent or Nil

Anchoring to Nil (the default) has almost the same effect as anchoring to the Parent. Both try to keep the distance to a side of the Parent's client area. Anchoring to Nil uses the distance of the last SetBounds call, while Anchoring to Parent uses the BorderSpacing value.

There are four combinations of akLeft,akRight (akTop,akBottom):

  • akLeft, no akRight: the control's Left is fixed and not changed by the LCL. The right side is not anchored, so it follows the left side. That means the Width is kept too.
  • akLeft and akRight: the control's Left is fixed and not changed by the LCL. The right side is anchored to the Parent's right side. That means if the Parent is enlarged by 100pixel then the control's Width is enlarged by 100pixel too.
  • akRight, no akLeft: the control's left side is not anchored, so it will follow its right side. The right side is anchored. That means if the parent is enlarged by 100pixel then the control is moved to the right by 100pixel.
  • no akLeft and no akRight: neither sides are anchored. The position of the center of the control scales with the parent. For example if the control is in the middle of the parent and the parent is enlarged by 100 pixel, then the control is moved 50pixel to the right.

更改一个锚定的控件的父类控件的大小

When changing the size of a parent all anchored child controls are moved and/or resized immediately unless AutoSizing is disabled. For example AutoSizing is disabled during loading of a form and during creation of a form.

一个组框带有一个按钮: Anchors1.png

当组框被放大时,被锚定边的距离将保持不变:

使用akLeft,不使用akRight: Anchors akLeft.png

使用akLeft和akRight: Anchors akLeft akRight.png

使用akRight,不使用akLeft: Anchors akRight no akLeft.png

三个按钮在一个组框中: Anchors no akLeft no akRight small.png

不使用akLeft和akRight,它们的中心被缩放: Anchors no akLeft no akRight big.png


Notes:

  • Loading a form is like one big SetBounds. During loading properties are set using the values of the lfm. Keep in mind that there can be multiple lfm files because of ancestors and frames. After loading the LCL enables autosizing. Anchored controls use the bounds at the end of loading. Any step in between is ignored.
  • For custom controls it is often better to set AnchorSides instead of only Anchors.

Changing the size of an anchored control

When changing the Width of an anchored control, for example via the Object Inspector or via code Button1.Width:=3, you can see the difference between anchoring to Parent and anchoring to Nil. Anchoring to Parent will resize and move the Button1, while anchoring to Nil will only resize. For example:

Anchored to nil

Anchored right nil resize1.png A Button1 anchored [akTop,akRight], AnchorSide[akRight].Control=nil

Anchored right nil resize2.png Setting the Width to a smaller value will shrink the button, keeping the button's Left, increasing the distance of the right side.

Anchored right nil resize3.png When the Groupbox is resized the button will keep the new distance.

Explanation: setting the Width is equivalent to calling SetBounds(Left,Top,NewWidth,Height). That's why the Left is kept. This is Delphi compatible.

Anchored to Parent

Anchored right parent resize1.png A Button1 anchored [akTop,akRight], AnchorSide[akRight].Control=Button1.Parent

Anchored right parent resize2.png Setting the Width to a smaller value will shrink the button, keeping the right distance, changing the button's Left.

锚定到同级控件

你可以锚定到相邻的控件,下面的示例显示:

  • 你可以锚定一个labe的左侧到一个按钮的左侧
  • 锚定一个 label 的顶部到一个按钮的底部
  • 锚定一个 label 的中心到一个按钮的中心


Anchorsides example1.png

Anchorside example2.png

更多详细信息和如何设置锚,查看: 锚定边

Anchoreditor2.png

BorderSpacing

The BorderSpacing properties controls the minimum amount of space around a control. The properties are:

  • Around: this amount in pixel is added to Left, Top, Right, Bottom.
  • Left: space in pixel on the left side of the control
  • Top: space in pixel above the control
  • Right: space in pixel on the right side of the control
  • Bottom: space in pixel below the control
  • InnerBorder: this amount in pixel is added twice to the preferred width and height. Some controls override the calculation and ignore this property. An example where it works is TButton. With InnerBorder you can make a button bigger than needed.
  • CellAlignHorizontal: This is used in table layouts like ChildSizing.Layout=cclLeftToRightThenTopToBottom. If the control is smaller than the table cell, this property defines where to align the control: to the left ccaLeftTop, to the right ccaRightBottom or in the middle ccaCenter.
  • CellAlignVertical: same as CellAlignHorizontal but for vertical alignment.

BorderSpacing rules

  • Around is added to Left,Top,Right,Bottom borderspacing
  • The space can be even bigger, if the controls have constraints that don't allow to expand.

Anchoring to the opposite side

For example right side of A to left side of B.

Both borderspacings of A and B are used.

  • The horizontal space between two controls (LeftControl, RightControl on Parent) is the maximum of
    • LeftControl.BorderSpacing.Right + LeftControl.BorderSpacing.Around
    • RightControl.BorderSpacing.Left + RightControl.BorderSpacing.Around
    • Parent.ChildSizing.HorizontalSpacing
  • The vertical space works analog: between two controls (TopControl, BottomControl on Parent) is the maximum of
    • TopControl.BorderSpacing.Bottom + TopControl.BorderSpacing.Around
    • BottomControl.BorderSpacing.Top + BottomControl.BorderSpacing.Around
    • Parent.ChildSizing.VerticalSpacing

For instance if LeftControl.BorderSpacing.Right = 3 and LeftControl.BorderSpacing.Around = 4, then there is at least 7 pixel space between the two controls. If RightControl.BorderSpacing.Left = 4 and RightControl.BorderSpacing.Around = 4 then the space will be at least 8. If Parent.ChildSizing.HorizontalSpacing = 10 then the space will be at least 10.

Anchoring to the same side

For example right side of A to right side of B.

  • Only borderspacings of A is used.
  • Parent.ChildSizing.Horizontal/VerticalSpacing are not used.

Anchoring to center

For example center of A to center of B.

No borderspacing is used and no Parent.ChildSizing.Horizontal/VerticalSpacing is used.

Example

A common example is anchoring a Label to an Edit.

BorderSpacing Anchors.png

The Label center is vertically anchored to the Edit. The Edit's left side is anchored to the right side of the Label. Both have BorderSpacing.Around=6. This results in 6 pixel space between the Label and the Edit and 6 pixel space left of the Label and 6 pixel space right of the Edit. There is 6 pixel space above and below the Edit as well.

  • The left space between a control and its parent (Label1 on GroupBox1) is the maximum of
    • Label1.BorderSpacing.Left + Label1.BorderSpacing.Around
    • GroupBox1.ChildSizing.LeftTopSpacing
  • The right space between a control and its parent (Edit1 on GroupBox1) is the maximum of
    • Edit1.BorderSpacing.Right + Edit1.BorderSpacing.Around
    • GroupBox1.ChildSizing.RightBottomSpacing
  • When a control's center is anchored to another control, for example the above Label is centered vertically to the Edit1, then all spacings are ignored.
  • When a control's left side is anchored to the left side of another control (i.e. they are aligned with the left side), then the distance between both left's side is the
    • Control1.BorderSpacing.Left + Control1.BorderSpacing.Around


Here is a more complex example:

Borderspacing anchors2.png

The important parts of the lfm code:

  object GroupBox1: TGroupBox
    AutoSize = True
    Caption = 'GroupBox1'
    TabOrder = 0
    object Label1: TLabel
      AnchorSideLeft.Control = GroupBox1
      AnchorSideTop.Control = Edit1
      AnchorSideTop.Side = asrCenter
      BorderSpacing.Around = 6
      Caption = 'Label1'
    end
    object Edit1: TEdit
      AnchorSideLeft.Control = Label1
      AnchorSideLeft.Side = asrBottom
      AnchorSideTop.Control = GroupBox1
      AnchorSideRight.Control = GroupBox1
      AnchorSideRight.Side = asrBottom
      Anchors = [akTop, akLeft, akRight]
      BorderSpacing.Around = 6
      TabOrder = 0
      Text = 'Edit1'
    end
    object Label2: TLabel
      AnchorSideLeft.Control = GroupBox1
      AnchorSideTop.Control = Edit1
      AnchorSideTop.Side = asrBottom
      BorderSpacing.Around = 6
      Caption = 'Label2'
    end
    object ComboBox1: TComboBox
      AnchorSideLeft.Control = Label2
      AnchorSideTop.Control = Label2
      AnchorSideTop.Side = asrBottom
      AnchorSideRight.Control = GroupBox1
      AnchorSideRight.Side = asrBottom
      Anchors = [akTop, akLeft, akRight]
      BorderSpacing.Right = 6
      TabOrder = 1
      Text = 'ComboBox1'
    end
    object CheckBox1: TCheckBox
      AnchorSideLeft.Control = GroupBox1
      AnchorSideTop.Control = ComboBox1
      AnchorSideTop.Side = asrBottom
      BorderSpacing.Around = 6
      Caption = 'CheckBox1'
      TabOrder = 2
    end
    object Label3: TLabel
      AnchorSideLeft.Control = GroupBox1
      AnchorSideTop.Control = Edit2
      AnchorSideTop.Side = asrCenter
      BorderSpacing.Around = 6
      Caption = 'Label3'
    end
    object Edit2: TEdit
      AnchorSideLeft.Control = Label3
      AnchorSideLeft.Side = asrBottom
      AnchorSideTop.Control = CheckBox1
      AnchorSideTop.Side = asrBottom
      BorderSpacing.Around = 6
      TabOrder = 3
      Text = 'Edit2'
    end
  end

BorderSpacing and Align

BorderSpacing works with Align. In the example below there is a Memo1 with Align=alTop and a Memo2 with Align=alCLient.

  • Normally the two Memos would fill the whole GroupBox.
  • But the Memo1 has BorderSpacing.Around=10, so there 10 pixel space around Memo1.
  • The Memo2 has BorderSpacing.Top=20. The space between Memo1 and Memo2 is the maximum, which is the 20 from Memo2.
  • Memo2 has also BorderSpacing.Right=50 so there is 50 Pixel space right of Memo2.
  • The GroupBox can define default space for all its child controls via ChildSizing.LeftRightSpacing/VerticalSpacing/HorizontalSpacing. In this example it does not (all 0).

Borderspacing align1.png

Align

The Align property works pretty much like in Delphi and can be used to quickly fill an area. For example to let a TListBox fill the entire area of its Parent, set ListBox1.Align=alClient. The align values alTop, alBottom, alLeft and alRight will place controls without overlapping if possible. That means all controls with Align in alLeft,alTop,alBottom,alRight will not overlap if there is enough space.

The algorithm works as follows:

  • First all controls with alTop are put to the top of the client area. If there are several controls with alTop the last added/moved will be put topmost. The algorithm will try to avoid overlapping and keep the height of the control, while expanding the width to maximum. AnchorSides of the left, top and right sides are ignored. The bottom AnchorSide works normal. Borderspacing and Parent.ChildSizing spaces are considered, so you can define space around each aligned control.
  • Then all controls with alBottom are put to the bottom of the client area. Otherwise it works analog to alTop.
  • Then all controls with alLeft are put to the left of the client area between the alTop and alBottom controls. Otherwise it works analog to alTop.
  • Then all controls with alRight are put to the right of the client area between the alTop and alBottom controls. Otherwise it works analog to alTop.
  • If there is a control with alClient it will fill the remaining client.
  • If there is more than one control with alClient they will be placed at the same position, overlapping each other. Use the Visibility property to define which one is shown.

Autosize align.png

Align and BorderSpacing

The space of BorderSpacing and of the parent's ChildSizing is applied to aligned controls. The memo below has Align=alClient.

Autosize align borderspacing.png

Align and Anchoring

The free side of an aligned control (e.g. the right side of a Align=alLeft) follows the anchoring rules. If the anchor is not set, then the control will keep its Width. If the anchor is set, then the Width will change.

Align and AutoSize

A control aligned with alLeft or alRight expands vertically, and will use its designed width. If AutoSize is set to true, then the Width will be the preferred width. The button below has Align=alRight and AutoSize=true.

Autosize align autosize.png

Align and parent AutoSize

A control aligned with alClient fills the remaining space. A parent control with AutoSize=true will expand or shrink to enclose its children exactly. What happens if you combine these two properties? Say you put a button with Align=alClient into a groupbox with AutoSize=true?

Autosize nested1.png

The LCL uses the preferred size of the buttons and expands or shrinks the groupbox accordingly:

Autosize nested2.png

alCustom

This Align value exists for custom AutoSize algorithms and is treated by the LCL almost like alNone. Controls with alCustom are not moved by the LCL but by your custom control. You have to override CalculatePreferredSize and DoAutoSize.

Order of controls with same Align

Controls with same Align are positioned in the following order. On alLeft the control with the lowest Left wins, for alTop the lowest Top, for alRight the biggest Left+Width, for alBottom the biggest Top+Height. If two controls have the same coordinate the one last moved (calls to SetBounds or SetParent) wins. Controls can override CreateControlAlignList to change the order or override DoAlignChildControls to handle the whole Align.

Note: Before 0.9.29 controls at the same coordinate were put in Z order. This resulted in reordering in some cases and had to be fixed. There is one incompatibility: If you added several controls with alTop or alLeft without specifying bounds the controls are put at 0,0 and therefore the last added wins, where formerly the first won.

Note for Delphians: Contrary to the VCL the LCL can and often does delay recomputing the layout. Delphi does the layout after every property change. Setting Align=alTop calls in the VCL a special AlignControls, where the current control has a special meaning. That's why in the VCL the order of setting properties is important. The LCL layout algorithm is independent of the chronological order of setting the properties.

For example all changes in FormCreate are delayed and the layout is computed from the final property values. On the other hand ButtonClick has no delay (aka you have to add the Disable/EnableAutoSize yourself), so inserting alTop controls may have different results.

If you want a specific order, use Disable/EnableAutoSize and set the "Top" properties. For example TForm.OnCreate is called with AutoSize disabled, so you can use:

procedure TForm1.FormCreate(Sender: TObject);
begin
  // making sure Panel2 is above Panel1, even though Panel1 is set first:
  Panel1.Align:=alTop;
  Panel1.Top:=1;
  Panel2.Align:=alTop;
  Panel2.Top:=0;
end;

Layout

Rows, columns and lines

You can align child controls in rows and columns using the ChildSizing properties. For example:

  • ChildSizing.Layout=cclLeftToRightThenTopToBottom
  • ChildSizing.ControlsPerLine=3
  • AutoSize=false (the groupbox does not resize to fit the child controls)

Autosize layout lefttoright.png

The Layout property defaults to cclNone. If you set Layout to another value, every child, that has normal anchors, will be aligned. Normal anchors means:

  • Anchors=[akLeft,akTop]
  • AnchorSide[akLeft].Control=nil
  • AnchorSide[akTop].Control=nil
  • Align=alNone

The value cclLeftToRightThenTopToBottom will put the first child at top, left, the second to the right, and so forth. This is a line. The property ControlsPerLine defines when a new line is started. In the above example each line (row) has 3 controls. There are 12 controls, so there are 4 lines (rows) each with 3 controls (columns). If ControlsPerLine is 0 it means unlimited controls per line - there would be only one row with all childs.

You can see that the rows have different sizes, each row has the size of the biggest control and that the controls are resized to column width. There is no space between the rows. The space in the image comes from the used theme, not from the LCL.

Fixed space between rows and columns

You can add space between with these properties:

  • ChildSizing.VerticalSpacing - Space between rows
  • ChildSizing.HorizontalSpacing - Space between columns
  • ChildSizing.LeftRightSpacing - Space on the left and right of all columns
  • ChildSizing.TopBottomSpacing - Space above and below of all columns

The above example with ChildSizing.VerticalSpacing=6, ChildSizing.HorizontalSpacing=15, ChildSizing.LeftRightSpacing=30, ChildSizing.TopBottomSpacing=10, AutoSize=true

Autosize layout parentspacing.png

Additionally you can add individual space for each control with its BorderSpacing properties.

Enlarge

The above example resized the GroupBox to the needed space. If your GroupBox has a fixed size or if it is not freely resizable, for instance if the GroupBox should fill the whole width of the form, then the childs should enlarge. There are several modes. The default mode ChildSizing.EnlargeHorizontal=crsAnchorAligning is to not enlarge anything. The space on the right side will be unused.

  • crsAnchorAligning - do not use the extra space
  • crsScaleChilds - multiply the width/height with the same factor
  • crsHomogeneousChildResize - add to each width/height the same amount
  • crsHomogeneousSpaceResize - add to each space between the childs the same amount

crsScaleChilds

ChildSizing.EnlargeHorizontal=crsScaleChilds, ChildSizing.EnlargeVertical=crsScaleChilds, AutoSize=false

Autosize layout scalechilds.png

For example if the ClientWidth is twice as big as needed, then every child will be twice as big.

crsHomogeneousChildResize

ChildSizing.EnlargeHorizontal=crsHomogeneousChildResize, ChildSizing.EnlargeVertical=crsHomogeneousChildResize, AutoSize=false

Autosize layout homogeneouschildresize.png

For example if the ClientWidth is 30 pixel bigger than needed, then every child will be 10 pixel broader.

crsHomogeneousSpaceResize

ChildSizing.EnlargeHorizontal=crsHomogeneousSpaceResize, ChildSizing.EnlargeVertical=crsHomogeneousSpaceResize, AutoSize=false

Autosize layout homogeneousspaceresize.png

For example if the ClientWidth is 40 pixel bigger than needed, there will be 10 pixel space on the left, right and between each child.

Shrink

Shrinking works similarly to enlarging. You can set different modes if there is not enough space for controls. ShrinkHorizontal, ShrinkVertical.

Individual cells

In the above examples all controls were resized the same, each filled the whole cell. A cell is the space in a specific row and column. Normally a control fills the whole cell space. This can be changed with the properties BorderSpacing.CellAlignHorizontal and BorderSpacing.CellAlignVertical.

For example set the BorderSpacing.CellAlignHorizontal of the fifth button to caCenter you will get this:

Autosize layout cellhorizontal cacenter.png

There are four possible values for CellAlignHorizontal/CellAlignVertical:

  • caFill: the child control fills the whole width (height) of the cell
  • caCenter: the child control uses its preferred width (height) and will be centered in the cell
  • caLeftTop: the child control uses its preferred width (height) and will be leftaligned in the cell
  • caRightBottom: the child control uses its preferred width (height) and will be rightaligned in the cell

Autosize layout cellalign.png

Custom layout with OnResize / OnChangeBounds

Sometimes the LCL layout is not sufficient. The below example shows a GroupBox1 with a ListBox1 and a Memo1. The ListBox1 should fill one third of the space, the Memo1 takes the rest.

Autosize onresize.png

Whenever the GroupBox is resized the ListBox1.Width should be one third. To achieve this set the OnResize event of the GroupBox1 to:

procedure TForm1.GroupBox1Resize(Sender: TObject);
begin
  ListBox1.Width := GroupBox1.ClientWidth div 3;
end;

Common mistake: Wrong OnResize event

Do not put all your resizing code into the Form OnResize event. The Form OnResize event is only called when the Form was resized. The child controls (e.g. a GroupBox1) is resized later, so the GroupBox1.ClientWidth has still the old value during the FormResize event. You must use the GroupBox1.OnResize event to react to changes of GroupBox1.ClientWidth.

Common mistake: Width instead of ClientWidth, AdjustClientRect

The Width is the size including the frame. The ClientWidth is the inner Width without the frame. Some controls like the TPanel paints a further frame. Then you have to use AdjustClientRect. The same example, but instead of a GroupBox1 the ListBox1 is in a Panel1:

procedure TForm1.Panel1Resize(Sender: TObject);
var 
  r: TRect;
begin
  r := Panel1.ClientRect;
  Panel1.AdjustClientRect(r);
  ListBox1.Width := (r.Right - r.Left) div 3;
end;

Custom Controls

When you write your own control, you can override and fine tune many parts of the LCL autosizing.

SetBounds, ChangeBounds, DoSetBounds

SetBounds is called when the properties Left, Top, Width, Height, BoundsRect is set or the user calls it directly. SetBounds updates the BaseBounds and BaseParentClientSize, which are used by anchoring to keep the distance. For example loading a Form with TMemo and the lfm contains TMemo's Left and Width, then SetBounds is called two times for the memo. When the user maximizes a window, SetBounds is called for the form, but not for the Memo, keeping the BaseBounds of the Memo. If the Memo is anchored to the right, the Width of the Memo is changed based on the BaseBounds and BaseParentClientSize. Keep in mind that the given aLeft, aTop, aWidth, aHeight might not be valid and will be changed by the LCL before applied. Delphi calls SetBounds more often. SetBounds calls ChangeBounds with KeepBase=false.

ChangeBounds is called whenever the position or size of the control is set, either via the properties or by the layouter of the LCL. SetBounds calls internally ChangeBounds with KeepBase=false, while the LCL layouter calls it with KeepBase=true. Override this for code that might change the preferred size or resizes other controls. Keep in mind that the given aLeft, aTop, aWidth, aHeight might not be valid and will be changed by the LCL before applied. You can call this function.

DoSetBounds is a low level function to set the private variables FLeft, FTop, FWidth, FHeight. Do not call this function, only the LCL calls it. It also updates FClientWidth and FClientHeight accordingly. Override this to update the content layout of the control, for example scroll bars. As always: do not paint here, but call Invalidate and paint in OnPaint or override Paint.

DoAdjustClientRectChange is called by the LCL and the LCL interface, when the ClientRect has changed and the Width and Height were kept.

WMSize exists for Delphi/VCL compatibility. It is called by the LCL interface and on every change of bounds.

AdjustClientRect

The method AdjustClientRect can be overriden by your custom controls and affects Align, ChildSizing.Layout and AnchorSides. It does not affect the meaning of Left, Top and does not affect normal anchoring (for example setting).

When you want to draw your own frame, then the child controls should be aligned within these frames. For example TPanel draws a frame and reduces the client area by overriding the method AdjustClientRect:

  TCustomPanel = class(TCustomControl)
  ...
  protected
    ...
    procedure AdjustClientRect(var aRect: TRect); override;
  ...

procedure TCustomPanel.AdjustClientRect(var aRect: TRect);
var
  BevelSize: Integer;
begin
  inherited AdjustClientRect(aRect);

  BevelSize := BorderWidth;
  if (BevelOuter <> bvNone) then
    inc(BevelSize, BevelWidth);
  if (BevelInner <> bvNone) then
    inc(BevelSize, BevelWidth);

  InflateRect(aRect, -BevelSize, -BevelSize);
end;

AdjustClientRect and Align

AdjustClientRect can be used to reduce the client area used by all autosize operations. For example TPanel uses AdjustClientRect to reduce the client area by the borderwidth:

Adjustclientrect align.png

The Button1 in the screenshot was created with Align=alClient. ChildSizing.Layout is affected too.

When anchoring to a parent via AnchorSides the AdjustClientRect is used too:

  Button1.AnchorParallel(akTop,0,Button1.Parent);

The Button1's top side is anchored to the top side of the parent's client area. If the AdjustClientRect adds 3 to the Top the Button1.Top will be 3 (3 plus 0).

Own AutoSize

When AutoSize is set to true the control should be resized to the preferred size if possible.

Preferred Size

The new size is fetched by the LCL via GetPreferredSize which calls CalculatePreferredSize, which can be overridden. For example let's write a TQuadrat, which is a TShape, but its height should equal its width:

  TQuadrat = class(TShape)
  protected
    procedure CalculatePreferredSize(var PreferredWidth,
        PreferredHeight: integer; WithThemeSpace: Boolean); override;
  end;
...
procedure TQuadrat.CalculatePreferredSize(var PreferredWidth,
  PreferredHeight: integer; WithThemeSpace: Boolean);
begin
  PreferredHeight:=Width;
end;

The method CalculatePreferredSize gets two var parameters: PreferredWidth and PreferredHeight. They default to 0 which means: there is no preferred size, so the LCL will not change the size. The above function sets PreferredHeight to the current Width. The boolean parameter WithThemeSpace is deprecated and always false.

Important: CalculatePreferredSize must not change the bounds or any other value of the control that can trigger an autosize. Doing so will create a loop.

Computing the PreferredWidth/Height can be expensive. Therefore the LCL caches the result until InvalidatePreferredSize is called for the control. In our example the PreferredHeight depends on the Width, so we must invalidate when the Width changes:

  TQuadrat = class(TShape)
  protected
    ...
    procedure DoSetBounds(ALeft, ATop, AWidth, AHeight: integer); override;
  end;
...
procedure TQuadrat.DoSetBounds(ALeft, ATop, AWidth, AHeight: integer);
begin
  inherited DoSetBounds(ALeft, ATop, AWidth, AHeight);
  InvalidatePreferredSize;
  // Note: The AdjustSize can be omitted here, because the [[LCL]] does that after calling DoSetBounds.
end;

The LCL will automatically trigger the autosizing when the bounds have changed, so the example is complete.

The default TWinControl implementation of CalculatePreferredSize queries the widget set, which might return a preferred width and/or height. Each control can override the CalculatePreferredSize method. For example TImage overrides it and returns the size of the Picture. If no preferred width (height) is available the returned value is 0 and the LCL will keep the current Width (Height). If 0 is a valid size for your control, you must set the ControlStyle flag csAutoSize0x0 (ControlStyle:=ControlStyle+[csAutoSize0x0];). An example is the LCL control TPanel.

AdjustSize

When the preferred size depends on a new property, then every time the property changes the auto sizing must be triggered. For example:

procedure TQuadrat.SetSubTitle(const AValue: string);
begin
  if FSubTitle = AValue then exit;
  FSubTitle := AValue;
  InvalidatePreferredSize;
  AdjustSize;
end;

Reduce overhead with DisableAutoSizing, EnableAutoSizing

Since Lazarus 0.9.29 there is a new autosizing algorithm, that reduces the overhead and allows deep nested dependencies. Up to 0.9.28 DisableAlign/EnableAlign and Disable/EnableAutoSizing worked only for one control and its direct child controls.

Each time you change a property the LCL triggers a recomputation of the layout:

Label1.Caption := 'A';  // first recompute
Label2.Caption := 'B';  // second recompute

The recomputations will trigger events and send messages. To reduce the overhead you can suspend the autosizing:

DisableAutoSizing;
try
  Label1.Caption := 'A';  // no recompute
  Label2.Caption := 'B';  // no recompute
finally
  EnableAutoSizing; // one recompute
end;

You must balance calls to Disable/EnableAutoSizing. Autosizing starts only when EnableAutoSizing is called after a corresponding (earlier) DisableAutoSizing.

Since 0.9.29 the Disable/EnableAutoSizing works for the entire form. This means every call to DisableAutoSizing suspends autosizing for all controls on that form. If you write your own control you can now use the following:

procedure TMyRadioGroup.DoSomething;
begin
  DisableAutoSizing;  // disables not only TMyRadioGroup, but the whole form's autosizing
  try
    // delete items ...
    // add, reorder items ...
    // change item captions ...
  finally
    EnableAutoSizing; // recompute
  end;
end;

Which basically means: you do not have to care. Just call Disable/EnableAutoSizing.

Note: this is wrong:

Button1.DisableAutoSizing;
Label1.EnableAutoSizing; // wrong: every control has its own autosizing reference counter

DisableAutoSizing and Form bounds

DisableAutoSizing has another useful effect under asynchronous Window Managers such as you find in Linux systems. Each time a form is resized or moved the bounds are sent to the widget set (DoSendBoundsToInterface). Even if the form is not shown the Handle is resized. The window manager often treats these bounds only as a proposal. The window manager has its own logic and often only the first bounds sent are used. The second, third or further moves may be ignored. With DisableAutoSizing you can make sure that only the final bounds are sent to the widget set making the form bounds more reliable.

Example: a button panel

This example combines several of the LCL layout mechanisms to create a panel with three buttons: a Help button to the left and Ok and Cancel buttons to the right. We want the panel to be at the bottom of the form filling the entire width. The buttons and the panel are autosized to fit all fonts and themes.

Step 1: Create the panel and set its Align property to alBottom. Add three TBitBtns.

Autosize example buttonpanel1.png

Set the Kind properties of the BitBtns to show the glyphs. You might need to set GlyphShowMode to gsmAlways to see them on your platform. Set the BitBtn's AutoSize property to True, which will shrink/enlarge the buttons to fit perfectly around the glyphs and text. Depending on your theme and platform you might notice that the buttons have different heights.

Autosize example buttonpanel2.png

Set the Align property of the help button to alLeft and set the other two buttons' Align property to alRight. This will enlarge the buttons vertically and move them to the far left/right. alLeft/alRight has no effect on the width, so the buttons use their preferred width.

Autosize example buttonpanel3.png

The Panel height is still fixed. Now set the panel AutoSize property to True. The panel now shrinks vertically to fit the tallest button.

Autosize example buttonpanel4.png

The Ok button has a short caption, so the button is very small. Set the button's Constraints.MinWidth to 75. The button will now enlarge somewhat.

Autosize example buttonpanel5.png

Now add some space around the buttons. Set the panel's ChildSizing.LeftTopSpacing/RightBottomSpacing/HorizontalSpacing to 6.

Autosize example buttonpanel6.png

Finally clear the Caption of the panel and set its BevelOuter to bvNone.

Autosize example buttonpanel7.png

Scrolling

Some LCL controls like TScrollBox, TForm, and TFrame show scrollbars if the child controls are too big to fit the scrollbox, form or frame. They inherit this behaviour from their ancestor TScrollingWinControl.

A scrolling control's logical client area can be bigger than the visible client area. The visible client area is ClientRect. It always starts at 0,0 and its width and height is the inner area. For example in a TGroupBox it is the size of the area inside the frame. So the following is always true:

ClientWidth <= Width
ClientHeight <= Height

The logical client area is defined by the method GetLogicalClientRect. By default it is the same as ClientRect. When a child control is anchored to the right side, it uses the logical client area. TScrollingWinControl overrides this method and returns the Range of the scrollbars if they are bigger than the ClientRect. The Range can be set manually or automatically with AutoScroll=true. An example for AutoScroll=true:

Autoscroll all fit1.png

The upper button has a fixed Width of 200. The lower button is anchored to the right side of the panel. Therefore the child controls have a preferred width of 200. Because the panel is bigger than 200 the logical client area is bigger too and the lower button expands.

Now the panel is shrunk, so that the ClientWidth becomes lower than 200:

Autoscroll not fit1.png

The preferred width is still 200, so the logical client area is now 200 and bigger than the visible client area. The lower button has now a Width of 200 and the panel shows a horizontal scrollbar.

Scroll Position

Changing the Position of a scrollbar does not change the Left or Top of any child control, nor does it change the logical client area, nor does it affect autosizing. The child controls are only virtually moved.

Scrolling and AutoSize

When AutoSize=true the LCL will expand the control to accommodate all its child controls, and no scrollbars are needed. If the control cannot be expanded, then (only) is the secondary action of AutoSize executed: moving the child controls.

Docking

Docking uses the described methods and properties of this page, see Docking.

Splitter

See TSplitter.

TLabel.WordWrap

TLabel.WordWrap changes the behavior of the preferred size of the label. WordWrap=true requires that the Width of the label is fixed, for example by anchoring the left and right size of the label. The preferred height of the label is then computed by breaking the Caption into multiple lines.

DPI auto-adjustment and absolute layout auto-adjustment

Historically the LCL has been utilized mostly to design absolute layouts, despite the huge amount of options which Lazarus offers for flexible layouts, like Align, Anchors, etc, as described on the rest of this article. On top of that, it has also historically ignored the DPI of the target and instead utilized values in pixels to measure the left, top, width and height properties of controls. For desktop platforms and Windows CE this has worked reasonably well, but with the advent of LCL support for Android this could no longer be ignored. Starting in Lazarus 0.9.31 the LCL can reinterprete the LCL absolute layout in pixels as a flexible grid. There are multiple modes to choose from and they will allow to reinterprete the pixel values as either really absolute, or as in being adjusted for the DPI or as in being considered simply a fraction of the form size.

It is important to note that these new rules affect only controls which are positioned without Align and with the most standard Anchors only.

In the case where the values will be adjusted for DPI, there is a new property: TCustomForm.DesignTimeDPI which should store the DPI value of the system where the form was designed. The positioning values will be expanded when the target DPI is larger than the design time DPI or reduced otherwise. The common value for desktop DPIs is 96 and is the default value given.

property DesignTimeDPI: Integer read FDesignTimeDPI write FDesignTimeDPI;

The way in which the layout is adjusted can be controlled with the property TApplication.LayoutAdjustmentPolicy

  TLayoutAdjustmentPolicy = (
    lapDefault,     // widget set dependent
    lapFixedLayout, // A fixed absolute layout in all platforms
    lapAutoAdjustWithoutHorizontalScrolling, // Smartphone platforms use this one,
                                             // the x axis is stretched to fill the screen and
                                             // the y is scaled to fit the DPI
    lapAutoAdjustForDPI // For desktops using High DPI, scale x and y to fit the DPI
  );

And the following new methods in TControl allow to force a layout-autoadjustment in a particular control and all its children or to control how particular descendants of TControl react to this:

TControl = class
public
...
    procedure AutoAdjustLayout(AMode: TLayoutAdjustmentPolicy;
      const AFromDPI, AToDPI, AOldFormWidth, ANewFormWidth: Integer); virtual;
    function ShouldAutoAdjustLeftAndTop: Boolean; virtual;
    function ShouldAutoAdjustWidthAndHeight: Boolean; virtual;

LCL-CustomDrawn-Android will call AutoAdjustLayout when the screen rotates, for example.

More details

Many controls override TControl.DoAutoSize to perform the actual auto-sizing.

IMPORTANT: Many Delphi controls override this method and many call this method directly after setting some properties.

During handle creation not all interfaces can create complete Device Contexts which are needed to calculate things like text size.

That's why you should always call AdjustSize instead of DoAutoSize.

TControl.AdjustSize calls DoAutoSize in a smart fashion.

During loading and handle creation the calls are delayed.

This method initially does the same as TWinControl.DoAutoSize. But since DoAutoSize is commonly overriden by descendant components, it is not useful to perform all tests, which can result in too much overhead. To reduce this the LCL calls AdjustSize instead.

When setting AutoSize = true the LCL autosizes the control in width and height. This is one of the most complex parts of the LCL, because the result depends on nearly a hundred properties. Let's start simple:

The LCL will only autosize the Width (Height) if it is free to resize. In other words - the width is not autosized if:

  • the left and right side is anchored. You can anchor the sides with the Anchors property or by setting the Align property to alTop, alBottom or alClient.
  • the Width is bound by the Constraints properties. The Contraints can also be overriden by the widget set. For example the winapi does not allow resizing the height of a combobox. And the gtk widget set does not allow resizing the width of a vertical scrollbar.

Same for Height.

The new size is calculated by the protected method TControl.CalculatePreferredSize. This method asks the widget set for an appropriate Width and Height. For example a TButton has preferred Width and Height. A TComboBox has only a preferred Height. The preferred Width is returned as 0 and so the LCL does not autosize the Width - it keeps the width unaltered. Finally a TMemo has no preferred Width or Height. Therefore AutoSize has no effect on a TMemo.

Some controls override this method. For example the TGraphicControl descendants like TLabel have no window handle and so cannot query the widget set. They must calculate their preferred Width and Height themselves.

The widget sets must override the GetPreferredSize method for each widget class that has a preferred size (Width or Height or both).

Parent.AutoSize

The above described the simple explanation. The real algorithm provides far more possibilities and is therefore far more complex.

Properties / Methods

  • Left
  • Top

If Parent<>nil then Left, Top are the pixel distance to the top, left pixel of the parent's client area (not scrolled). Remember the client area is always without the frame and scrollbars of the parent. For Delphi users: Some VCL controls like TGroupbox define the client area as the whole control including the frame and some not - the LCL is more consistent, and therefore Delphi incompatible. Left and Top can be negative or bigger than the client area. Some widget sets define a minimum/maximum somewhere around 10.000 or more.

When the client area is scrolled the Left and Top are kept unchanged.

During resizing/moving Left and Top are not always in sync with the coordinates of the Handle object.

If Parent=nil then Left, Top depend on the widget set and the window manager. Till Lazarus 0.9.25 this is typically the screen coordinate of the left,top of the client area of the form. This is Delphi incompatible. It is planned to change this to the Left, Top of the window.


Hint: Each time you change Left and Top the LCL moves instantly and recomputes the whole layout. If you want to change Left and Top use instead:

with Button1 do
  SetBounds(NewLeft, NewTop, Width, Height);
  • Width
  • Height

The Size in pixels must not be negative, and most widget sets do not allow Width=0 and/or Height=0. Some controls on some platforms define a bigger minimum constraint in Constraints.MinInterfaceWidth/Height. Instead of sizing a control to Width=0 and/or Height=0, set Visible=false or Parent=nil. During resizing/moving Width and Height are not always in sync with the size of the Handle object.


  • BoundsRect

Same as Bounds(Left, Top, Width, Height).

Common newbie mistake:

BoundsRect.Left := 3; // WRONG: common newbie mistake

This has no effect, because reading BoundsRect is a function. It creates a temporary TRect on the stack. The above is the same as

var
  r: TRect;
begin
  r := BoundsRect; // fetch the bounds
  r.Left := 3;  // change a value on the stack
end;  // no change
  • ClientRect

Left and Top are always 0,0. Width and Height are the visible size in pixels of the client area. Remember the client area is without the frame and without scrollbars. In a scrollable client area the logical client area can be bigger than the visible.

  • ClientOrigin

Returns the screen coordinate of the topleft coordinate 0,0 of the client area. Note that this value is the position as stored in the interface and is not always in sync with the LCL. When a control is moved, the LCL sets the bounds to the desired position and sends a move message to the interface. It is up to the interface to handle moves instantly or queued.

  • LCLIntf.GetClientBounds

Returns the client bounds of a control. Like ClientRect, but Left and Top are the pixel distances to the control's left, top. For example on a TGroupBox the Left, Top are the width and height of the left and top frame border. Scrolling has no effect on GetClientBounds.

  • LCLIntf.GetWindowRect

After the call, ARect will be the control area in screen coordinates. That means, Left and Top will be the screen coordinate of the TopLeft pixel of the Handle object and Right and Bottom will be the screen coordinate of the BottomRight pixel.


  • FBaseBoundsLock: integer

Increased/Decreased by LockBaseBounds/UnlockBaseBounds. Used to keep FBaseBounds during SetBounds calls.


  • FBaseParentClientSize: TPoint

The Parent.ClientRect size valid for the FBaseBounds. FBaseBounds and FBaseParentClientSize are used to calculate the distance for akRight (akBottom). When the parent is resized, the LCL knows what distance to keep.


  • FBoundsRectForNewParent: TRect

When changing the Parent of a control the Handle is recreated and many things can happen. Especially for docking forms the process is too unreliable. Therefore the BoundsRect is saved. The VCL uses a similar mechanism.


  • fLastAlignedBounds: TRect

See TControl.SetAlignedBounds for an explanation. In short: It stops some circles between interface and LCL autosizing.


  • FLastChangebounds: TRect

Used to stop calling ChangeBounds with the same coordinates. This happens very often.


  • FLastDoChangeBounds: TRect

Used to avoid calling OnChangeBounds with the same coordinates. This reduces user defined autosizing.


  • FLastResizeClientHeight: integer
  • FLastResizeClientWidth: integer
  • FLastResizeHeight: integer
  • FLastResizeWidth: integer

Used to avoid calling OnResize with the same coordinates. This reduces user defined autosizing.


  • FLoadedClientSize: TPoint

During loading many things are delayed and many things are set and worse: in the wrong order. That's why SetClientWidth/SetClientHeight calls are stored and set at end of loading again. This way the LCL can restore the distances (e.g. akRight) used during designing.


  • FReadBounds: TRect

Same as FLoadedClientSize, but for SetLeft, SetTop, SetWidth, SetHeight.


  • procedure SetBoundsRectForNewParent(const AValue: TRect);

Used to set FBoundsRectForNewParent. See above.


  • procedure SetAlignedBounds(aLeft, aTop, aWidth, aHeight: integer); virtual;

As SetBounds but without changing the default sizes.


  • procedure SetInitialBounds(aLeft, aTop, aWidth, aHeight: integer); virtual;

A smart version of SetBounds, reducing overhead during creation and loading.


  • procedure UpdateBaseBounds(StoreBounds, StoreParentClientSize, UseLoadedValues: boolean); virtual;

Commit current bounds to base bounds.

  • procedure SetClientHeight(Value: Integer);
  • procedure SetClientSize(Value: TPoint);
  • procedure SetClientWidth(Value: Integer);

Exists for Delphi compatibility too. Resizes the control, to get the wanted ClientRect size.


  • procedure ChangeBounds(ALeft, ATop, AWidth, AHeight: integer); virtual;

This is the internal SetBounds. Applies constraints, updates base bounds, calls OnChangeBound, OnResize, locks bounds.


  • procedure DoSetBounds(ALeft, ATop, AWidth, AHeight: integer); virtual;

This really sets the FLeft, FTop, FWidth, FHeight private variables.


  • procedure SetBounds(aLeft, aTop, aWidth, aHeight: integer); virtual;

This is the standard procedure overriden by many Delphi controls. TWinControl overrides it too.

    • ignores calls when bounds are locked
    • lock the FBoundsRealized to avoid overhead to the interface during auto sizing.

ChangeBounds is not locked this way.


  • Function GetClientOrigin: TPoint; virtual;

Screen coordinate of Left, Top of client area.

  • Function GetClientRect: TRect; virtual;

Size of client area. (always Left=0, Top=0)

  • Function GetScrolledClientRect: TRect; virtual;

Visible client area in ClientRect.


  • function GetChildsRect(Scrolled: boolean): TRect; virtual;

Returns the Client rectangle relative to the control's Left, Top. If Scrolled is true, the rectangle is moved by the current scrolling values (for an example see TScrollingWincontrol).

  • function GetClientScrollOffset: TPoint; virtual;

Returns the scrolling offset of the client area.


  • function GetControlOrigin: TPoint; virtual;

Returns the screen coordinate of the topleft coordinate 0,0 of the control area. (The topleft pixel of the control on the screen) Note that this value is the position as stored in the interface and is not always in sync with the LCL. When a control is moved, the LCL sets the bounds to the wanted position and sends a move message to the interface. It is up to the interface to handle moves instantly or queued.

FAQ

Why does AutoSize not work in the designer properly?

In the designer controls can be dragged around and properties can be set in almost any order. To allow this and avoid possible conflicts, the AutoSizing is not updated on every change at design time.

Why does TForm.AutoSize not work when something changes?

See AutoSize and Forms

Do I need to call Application.ProcessMessages when creating lots of controls?

Application.ProcessMessages is called by the LCL automatically after every message (e.g. after every event like OnClick). Calling it yourself is only needed if the changes should become visible to the user immediately. For example:

procedure TFrom.Button1Click(Sender: TObject);
begin
  // change width of a control
  Button1.Width := Button1.Width + 10;
  // apply any needed changes and repaint the button
  Application.ProcessMessages;
  // do a lot of things that takes a long time
  ...
  // after leaving the OnClick the LCL automatically processes messages
end;

When enabling Anchors at runtime the control resizes, does not use the current values. Why?

akBottom means: keep a distance to the bottom side of the parent. The distance to keep is defined by the base bounds. They are set at designtime or by runtime calls of SetBounds or UpdateBaseBounds.

For example: A TListBox (Anchors=[akLeft,aTop]) at designtime has a bottom distance of 100 pixel. And a button to enable/disable the akBottom of the TListBox. Now start the application and press the button to enable akBottom. The 100 pixel distance will be activated, because this was the last time the programmer defined the base bounds of the TListBox. All other resizes were done by the LCL and are irrelevant. The programmers base bounds rules. You can resize the form and the 100 pixel will be kept. In order to use the current bounds as base bounds use:

ListBox1.UpdateBaseBounds(true, true, false);
ListBox1.Anchors := ListBox1.Anchors + [akBottom];

Setting Anchors does not automatically call UpdateBaseBounds, because this would destroy the ability to change properties independently.

Resizing stringgrid columns in form's OnResize event does not work

The Form's OnResize is triggered when the Form's Width, Height, ClientWidth or ClientHeight changes. This is per se independent of TStringGrid. Of course it often happens that both the Form and the TStringGrid are resized. This means using forms OnResize will often work, but not always. A prominent example where it always fails is when the theme is changed and you have a TStringGrid in a TGroupBox in a TForm. When the theme changed the form size is kept, so no Forms OnResize is triggered. But the TGroupBox changed, so the TStringGrid should be resized.

Solution: Use the TStringGrid's OnResize.

Why is TForm.Width equal to TForm.ClientWidth?

Mattias' notes:

"There are historical and technical reasons.

For forms without parent the Clientwidth equals the Width, because the real Width including the frame was not available on Linux ten years ago (at least not reliable on various window managers). I didn't test, but I heard it is now possible with gtk2. The main problem is the autosizing, because this needs the frame sizes before the form is mapped to the screen. It might be, that this is only available after an event, which means that you have to wait for it, which means trouble for ShowModal. Changing this breaks compatibility with a lot of existing LCL code, but for this we added the LCLVersion in the lfm files.

There is a new compiler define LCLRealFormBounds In Lazarus trunk 1.7 that enables real size for a form. To use it just compile your application with LCLRealFormBounds ON. For now, only win32 widget set is supported.

For all other controls the rules is ClientWidth<=Width. The Width is the ClientWidth plus the widget frame. The question is if the scrollbars belong to the frame. I would say yes and it was implemented that way some time ago. Apparently this has changed. See the current cursor problem on synedit."

I get an infinite loop / How to debug autosizing?

Here are some notes, what other users made wrong and how to find out:

Differences to Delphi

For Delphi users: Please read: Lazarus_vs_Delphi

Overriding a LCL method and triggering a recompute

You override a method and tell the LCL to compute again, even if nothing changed. Check for AdjustSize, Realign, AlignControls, InvalidatePreferredSize. For example:

procedure TMainForm.SetBounds(ALeft, ATop, AWidth, AHeight: integer);
begin
  // This will create an endless loop
  InvalidatePreferredSize;

  // This will create an endless loop too:
  OtherComponent.Left:=10;
  OtherComponent.Left:=20;

  inherited SetBounds(ALeft, ATop, AWidth, AHeight);
end;

Explanation: The SetBounds method is called often, even without changing anything. For example a "Left:=30;" will do so.

Remedy: Check for changes:

procedure TMainForm.SetBounds(ALeft, ATop, AWidth, AHeight: integer);
begin
  if (Left <> ALeft) or (Top <> ATop) or (Width <> AWidth) or (Height <> AHeight) then
    InvalidatePreferredSize;
  inherited SetBounds(ALeft, ATop, AWidth, AHeight);
end;

TWinControl.AlignControls

procedure AlignControls(aControl: TControl; var aRect: TRect); override;

AlignControls moves and sizes all child controls. The LCL implementation ignores controls with Align=alCustom.

The parameter aControl: TControl is kept for VCL compatibility. The LCL always passes nil. It gives aControl precedence when applying the Align property. When you have for example two controls A,B with Align=alLeft then the one with the lower Left is put left most. If both have the same Left then creation order wins. Now imagine you want to switch both controls A,B in the designer. You drag B to the left. This results in setting B.Left to 0. Now AlignControls starts and find both A.Left=0 and B.Left=0. Normally A would win. To let B win the VCL calls AlignControls(B,r). So aControl is the last moved. Contrary to the VCL the LCL allows to combine multiple layout changes without recomputing on every step. The LCL keeps track of the last moved controls in TWinControl.fAlignControls and applies the order in TWinControl.CreateControlAlignList. The aControl parameter is always nil.

See TWinControl.CreateControlAlignList.

OnResize/OnChangeBounds conflict with LCL properties

You set bounds that bite the LCL properties. For example a TLabel.AutoSize is true by default. If you set the Label1.Width in an OnResize event, the LCL will recompute, resize the Label1 and call the OnResize again. Start your application in the debugger and reproduce the bug. When it enters the loop, pause the application and see the call stack. If you see one of your events or your methods start searching there. For example:

procedure TMainForm.FormResize(Sender: TObject);
begin
  // if Button1 is anchored or AutoSize=true then the following might create an endless loop:
  Button1.Width:=100;
end;

LCL interface bug, custom widget

Sometimes the LCL interface or your custom control has a bug and undoes the LCL bounds. Compile the LCL with -dVerboseIntfSizing. This will write the communication between LCL and the LCL interface. If a widget does not allow free resizing, it must tell the LCL via the Constraints. Search for SetInterfaceConstraints in the various LCL interfaces and TWSControlClass.ConstraintWidth/Height.

alCustom

You use alCustom. This was only half implemented in earlier Lazarus versions, but some clever programmers used it to create some special effects. Now it is implemented and your program does not work anymore. Please see here what alCustom does: alCustom.

See also

贡献者和更改

  • 简体中文版本由 robsean 于 2020-02-18 创建。