From Lazarus wiki
Jump to navigationJump to search

"Cody" is a Lazarus design time package extending the IDE with some advanced code tools for power users. It is located in the Lazarus sources components/codetools/ide/cody.lpk since Lazarus 0.9.31.


Cody adds the following items to the IDE:

PPU files of project

  • Menu item: Project / Show ppu files of project
  • Requires: A compiled project
  • Key name: Show used .ppu files ... (in the IDE under options Editor / Key mapping)

This dialog provides statistics about all the current project's used .ppu and .o files.

Note: The codetools will try to parse all used .ppu files. The codetools uses its own ppu parser (not the compiler's parser). The advantage of this is that codetools can read many different versions of ppu. The drawback is that it might not be able to read the very latest version. Cody uses the sources as fallback.


The first page Units shows which unit uses what other units, and where they are used. Note: If a .ppu file cannot be parsed the source (.pas, .pp) will be parsed instead of the .ppu.

Cody ppu files2.png

You can sort the list by double-clicking on a column header.

  • General
    • Source: the full file name of the unit source file
    • PPU: the full file name of the unit ppu file.
  • Uses: This lists all units used by that unit.
  • Used by: This lists all units that use the current unit directly.
  • Uses path: This gives one path from the project main source to the unit. This is not necessarily the shortest path.

Linked Files

The second page Linked Files shows what files, libraries and frameworks are used by the project and what unit links them in.

Cody ppu linked files1.png

  • Hint: Double click on an unit to jump to the unit on the Units page.
  • Note: If a .ppu file cannot be parsed, there is no fallback. There will be no information displayed about that unit's linked files.

Insert file at cursor

  • Requires: a file in the source editor
  • Menu item: Source Editor / popup / Source / Insert file at cursor ...
  • Shortcut name: Insert file at cursor (in the IDE under options Editor / Key mapping)

This opens a file dialog. Select a file, which will be inserted at the current source editor position. If some text was selected, it will be replaced.

Insert call inherited

  • Requires: cursor in a method implementation
  • Menu item: Source Editor / popup / Source / Add call inherited
  • Shortcut name: Insert call inherited (in the IDE under options Editor / Key mapping)

This adds a call to the inherited method with all parameters. For example:

<Delphi> type

 TMyClass = class(TComponent)
   constructor Create(AOwner: TComponent); override;

constructor TMyClass.Create(AOwner: TComponent); begin


end; </Delphi>

This will add inherited Create(AOwner);:

<Delphi> constructor TMyClass.Create(AOwner: TComponent); begin

 inherited Create(AOwner);

end; </Delphi>

If the method is a function and the current line is empty it will prepend a Result:=.

<Delphi> function TMyClass.ExecuteAction(Action: TBasicAction): Boolean; begin

 Result:=inherited ExecuteAction(Action);

end; </Delphi>

Add Assign method

  • Requires: cursor in a class
  • Menu item: Source Editor / popup / Refactor / Add Assign method ...
  • Shortcut name: Add Assign method (in the IDE under options Editor / Key mapping)

If you are using Object Pascal, then you often need to copy an object and so you will probably often write an Assign method. This tool generates the method automatically for you and gives you a dialog to quickly select the members to copy. Here is an example of a produced method code:

<Delphi> type

 TMyClass = class(TComponent)
   FMyInt: integer;
   procedure Assign(Source: TPersistent); override;
   property MyInt: integer read FMyInt write FMyInt;

procedure TMyClass.Assign(Source: TPersistent); var

 aSource: TMyClass;


 if Source is TMyClass then
 end else
   inherited Assign(Source);

end; </Delphi>

Cody add assign method1.png

  • Method name: type in the name of the new method. It is automatically checked if there is already such a method or if an ancestor has inherited one.
  • Parameter name: the parameter name is taken from the inherited method, otherwise Source.
  • Parameter type: the parameter type is taken from the inherited method, otherwise TObject. If this type is different than the current class an if-then-else block is added.
  • If there is an inherited method:
    • Check 'Override' to override it. This appends the override method modifier.
    • Check 'Call inherited' to add a line 'inherited'.
    • Check 'Call inherited only if wrong class' to call the inherited method only in the else part. This is needed for all direct descendants of TPersistent.
  • Select members to assign:
    • This lists all variables and all properties that are assignable (readable and writable).
    • It also shows if a variable is written by a property.
    • You can select/unselect by clicking on a member.

Explode a "With" block

This tool removes a With and inserts the with expression in front of each identifier needing it.

  • Requires: cursor on a With expression (e.g. the variable between the keywords With and Do)
  • Menu item: Source Editor / popup / Refactoring / Remove With block
  • Shortcut name: Remove With block (in the IDE under options Editor / Key mapping)

For example:

<Delphi> with Button1 do begin


end; </Delphi>


<Delphi> Button1.Name:='Button1'; Button1.Caption:='Ok'; </Delphi>

Add a "With" block

This tool adds a With around the selection of the Source Editor and removes all occurrences of the expression.

  • Requires: selected Pascal statements in the Source Editor with at least one expression to shorten
  • Menu item: Source Editor / popup / Refactoring / Add With block
  • Shortcut name: Add With block (in the IDE under options Editor / Key mapping)

For example:

<Delphi> Button1.Name:='Button1'; Button1.Caption:='Ok'; </Delphi>


<Delphi> with Button1 do begin


end; </Delphi>

Beware: This function does not check for conflicts. For example:

<Delphi> procedure TForm1.Button1Click(Sender: TObject); begin


end; </Delphi>

When you enclose the assignment the function will stupidly convert to:

<Delphi> procedure TForm1.Button1Click(Sender: TObject); begin

 with Button1 do begin
   Enabled:=Enabled; // wrong

end; </Delphi>


  • The function does *not* check if the change breaks the code.
  • When you want to enclose a whole procedure, select all statements, excluding the begin/end keywords.
  • The function does not check if the selection starts or ends within a statement. It will enclose only the text within the selection, no matter if this results in wrong code. Undo is your friend.

Declare Variable

This tool is an interactive version of Variable Declaration Completion. It tries to guess the type and context of the identifier at cursor and gives you a list of possible places to declare the variable.

  • Requires: cursor on an undeclared identifier in a statement.
  • Menu item: Source Editor / popup / Refactoring / Declare Variable
  • Shortcut name: Declare Variable (in the IDE under options Editor / Key mapping)

Cody declare var1.png

For example:

<Delphi> procedure DoSomething; begin


end; </Delphi>

Place the cursor on the i and invoke the dialog. Select "local variable" and click Ok. The result is

<Delphi> procedure DoSomething; var

 i: Integer;



end; </Delphi>

You can declare member variables:

<Delphi> procedure DoSomething(A: TMyClass); begin

 A.Identifier:='Declare a variable in TMyClass';

end; </Delphi>

You can declare variables on the clipboard. This gives you superior control where the new variable is declared. Move the source editor cursor to the destination and paste (e.g. Ctrl+V). Cody will automatically create a new var section if needed.


  • keeps the cursor. You can quickly define a variable without moving/changing your source editor.
  • Guesses type of assignments: identifier:=<expression>, this includes for i:=0 to
  • Guesses type of for in: for identifier in <list type>
  • nested procedures: allows to define a variable on every level
  • with blocks: every with adds its contexts
  • class sections: private, protected, public, published
  • interface, implementation, program, package, library
  • checks if identifier is already declared
  • automatically adds the needed unit for the type
  • it can create the declaration on the clipboard. This creates a special format on the clipboard containing all needed information so that a paste will add the needed unit to the uses section. Or you can paste it into another application.

Unit / Identifier Dictionary

Cody keeps track of all global identifiers the IDE has every seen. This tool let's you browse this history. You can jump to the identifier in the source editor or you can use the identifier. Using means inserting/replacing the identifier at the current source editor position, extending the uses section and extending the project/package dependencies. In other words: This tool is like the identifier completion, but with a far bigger search scope.

  • Requires: cursor on an identifier.
  • Menu item: Source Editor / popup / Show unit / identifier dictionary
  • Shortcut name: Show unit / identifier dictionary (in the IDE under options Editor / Key mapping)


  • At the top you can see some stats about the current database.
  • Hide units of other projects: By default the dialog shows only the normal identifiers, that means units of the current project, units in packages and units of FPC. If you want to use an unit from one of your other projects, it is recommended to put the unit into a package. Nevertheless this dialog supports using units of another project too. Then it will extend the unit search path.
  • Filter: This text filters the listed identifiers. It works case insensitive. Exact matches are shown first. If an identifier is defined in multiple units, there will be one entry for each unit. Note that this is only a history. The data may be outdated.
    • Starts: Only identifiers starting with the text are shown.
    • Contains: Only identifiers containing the text are shown.
    • You can use Up and Down keys to move the selected identifier.
  • Unit, Package: This is the unit/package file of the selected identifier.
  • Add unit to implementation uses section: When using an identifier this tool checks if the unit is already in the uses section and will add it if needed. If the source editor is in the implementation section you have a choice which uses section to use.
  • Help: opens this help
  • Jump to: Opens the package if needed, opens the file in the source editor, jumps to the identifier. If the identifier has vanished since the last time you opened the file in the IDE, you will get an error.
  • Cancel: close the dialog without any action
  • Use identifier: Opens the package if needed. Replaces the current identifier in the source editor. If needed adapts the uses section(s). If needed adds a package dependency or extends the unit search path. It does some sanity checks if the unit or package conflicts and gives an error. If the identifier has vanished since the last time you opened the file in the IDE, you will get an error.
  • Options: Under Tools / Options / Codetools / Cody
    • Load dictionary after X seconds: The dictionary is not loaded immediately on start up, so the IDE starts fast no matter how big the database is. The database is loaded when needed or after some seconds, which you can set here.
    • Save dictionary every X minutes: The dictionary is updated on idle whenever the IDE has parsed some sources. The dictionary is written to disk in intervals. It is written in another thread, so you won't notice it.
    • Save dictionary now: This forces an immediate write to disk.

See also