GIT Exercises

This page will has some exercises, so you can experience different solutions/outcome to a given task yourself.

By giving those (partly trivial) examples, the page ensures that you will not miss any of the scenarios while discovering yourself.

Preface

Some of the examples are about how to deal with your work, when other people pushed in between.

For this you need a 2nd clone. See setup.

Setup

The following steps should be performed before going to any of the below items.

Initial setup and clone

SVN_to_GIT_Cheatsheet#Setup

Second clone

To simulate what someone else would have done, while you where working. This can use the same user, the effect will be the same.

You can either "git clone" again, or just make a copy of the entire directory into which you have cloned.

You can then in that 2nd clone alter your username

   git config user.name  martin_2

Each example setup

In your first git folders, create a new branch

  git switch -c martins-test-1
  git push --set-upstream origin martins-test-1  ## tell the server there is a new branch

In your 2nd git folder

  git remote update
  git switch martins-test-1

Thus both your folders are an the same branch, and are up to date with the remote

  Note: In the example you work on "martins-test-1". But it is setup the same as your trunk branch would be. Therefore the same will apply when you work on trunk

Pushing your commit, if someone else made changes

  Note: If you followed the configuration your "git pull" should be configured to default to either "--ff-ony" or "--rebase".
The arguments given in to "pull" in the examples, will override the defaults

Rebase

In Folder1	In Folder2 (other person)
Setup new branches #Each example setup
Edit the file lcl/forms.pp git commit -m 'test changes' lcl/forms.pp git log --oneline --graph --all -n 2 * 3b007fdc38 (HEAD -> martins-test-1) test changes * c739dd68a7 (origin/master, origin/HEAD) Revert "Test a change in forms" Your commit, follows the previous commit
	Edit the file ide/main.pp git commit -m 'test other' ide/main.pp git push
git push  ! [rejected] martins-test-1 -> martins-test-1 (fetch first) error: failed to push some refs to 'https://gitlab.com/freepascal.org/lazarus_testconversion.git' Instead of the normal pull, we do a fetch. This will not resolve the problem, and we can see what it looks like. git fetch git log --oneline --graph --all -n 3  * 46a817b6b3 (origin/martins-test-1) test other  | * 3b007fdc38 (HEAD -> martins-test-1) test changes  |/  | * c739dd68a7 (origin/master, origin/HEAD) Revert "Test a change in forms"
For the #Merge example stop here, and continue in the next section
You can see your commit still follows the same commit as before. But on the server (origin/martins-test-1) there is the other commit, and it too has the same parent. The history on the server is fixed. We do not allow for it to be changed. So that commit will keep its parent. In order to get your commit to the server, your local commit must change it's parent to "test other" (that is called "rebase") git pull --rebase Successfully rebased and updated refs/heads/martins-test-1. git log --oneline --graph --all -n 3 * 2cbe840e7e (HEAD -> martins-test-1) test changes * 46a817b6b3 (origin/martins-test-1) test changes * c739dd68a7 (origin/master, origin/HEAD) Revert "Test a change in forms" Now your commit is on top, and we have a flat line of commits (like svn) git push

Merge

Warning: This example is what we want to avoid. This creates a diverged history (sub-branches). The log is no longer linear.

In Folder1	In Folder2 (other person)
Setup new branches #Each example setup Repeat the steps from #Rebase above until you done "git fetch" and reached the note for the "merge example"
Now run git pull --no-ff --no-rebase Merge made by the 'recursive' strategy. ide/main.pp | 3 --- 1 file changed, 3 deletions(-) The --no-ff --no-rebase override any configs you may have made, and get you the default behaviour of merging. Git will open an editor for you, and ask for a commit message for the merge. The merge creates a new commit. git log --oneline --graph --all -n 4  * 044d9288b7 (HEAD -> martins-test-2) Merge branch 'martins-test-2' of https://gitlab.com/freepascal.org/lazarus_testconversion into martins-test-2  |\  | * 379b633c88 (origin/martins-test-2) test other  * | cfa3def67c test changes  |/  * 2cbe840e7e foo bar As you can see the two commits are in different sub-branches (they are actually side by side). And a new merge commit has been added. You can push this. But this creates a commit log, like you would never see in svn.

Fast Forward

  Note: In this example you will not have made a commit. Only the other person will have made a commit

Fast-Forward (FF) can only happen if

• there are new commits from a someone else
• but you have not made a commit yourself

In Folder1	In Folder2 (other person)
Setup new branches #Each example setup
Edit the file lcl/forms.pp Do not commit the changes. git status -uno On branch martins-test-1 Your branch is up to date with 'origin/martins-test-1'. Changes not staged for commit: (use "git add <file>..." to update what will be committed) (use "git restore <file>..." to discard changes in working directory) modified: lcl/forms.pp Your changes are relative to the last commit git log --oneline -n1 c739dd68a7 (HEAD -> martins-test-1) Foo bar"
	Edit the file ide/main.pp git commit -m 'test other' ide/main.pp git push
Fetch the data from the remote git fetch Status will tell you you are behind the remote git status -uno On branch martins-test-1 Your branch is behind 'origin/martins-test-1' by 1 commit, and can be fast-forwarded. (use "git pull" to update your local branch) Changes not staged for commit: (use "git add <file>..." to update what will be committed) (use "git restore <file>..." to discard changes in working directory) modified: lcl/forms.pp Your changes are still relative to the last local commit. Indicated by "HEAD" git log --oneline -n2 origin/martins-test-1 bc20668e78 (origin/martins-test-1) test other c739dd68a7 (HEAD -> martins-test-1) Foo bar" git pull --ff-only Updating c739dd68a7..bc20668e78 Fast-forward ide/main.pp | 2 ++ 1 file changed, 2 insertions(+) Now the local branch "martins-test-1" has caught up to the remote branch. It includes the new commits. And it switched to the top commit. This catching up, is a fast forward. No local branches commits where changed/moved/added. Only the branch pointer moved Your changes are still there, and are now relative to the top commit git log --oneline -n2 --graph origin/martins-test-1 bc20668e78 (HEAD -> martins-test-1, origin/martins-test-1) test other c739dd68a7 Foo bar"

Getting selected upstream changes

In Folder1	In Folder2 (other person)
Setup new branches #Each example setup
Edit the file lcl/forms.pp Edit the file ide/main.pp somewhere from line 100 down git diff --stat ide/main.pp | 5 +++++ lcl/forms.pp | 4 ++++ 2 files changed, 9 insertions(+) git log --oneline -n 1 c739dd68a7 (HEAD -> martins-test-1) Foo Bar"
	Edit the file ide/main.pp somewere in the first 20 lines (no conflict with the main user in folder1) Also edit the file lcl/grids.pas git commit -m 'test other' -a git push
Update from remote. Keep current commit as base for your changes git fetch git log --oneline -n2 origin/martins-test-1 810b4f1bd4 (origin/martins-test-1) test other c739dd68a7 (HEAD -> martins-test-1) Foo Bar The commit "test other" changes several files. For testing you want to integrate the changes in file ide/main.pp, but no other changes. git stash git restore --source=origin/martins-test-1 ide/main.pp git commit -m 'dummy commit' ide/main.pp git stash pop Now you have a dummy commit with the changes to test. And your changes applied on top. git log --oneline -n2 63e2dcec9f (HEAD -> martins-test-1) dummy commit c739dd68a7 Foo Bar git diff --stat ide/main.pp | 5 +++++ lcl/forms.pp | 4 ++++ 2 files changed, 9 insertions(+) Now work with those changes, make further changes, eventually commit git commit -m 'my changes' -a [martins-test-1 9aba7218d1] my changes 2 files changed, 9 insertions(+) git log --oneline -n5 --graph --all  * 9aba7218d1 (HEAD -> martins-test-1) my changes  * 63e2dcec9f dummy commit  | * 810b4f1bd4 (origin/martins-test-1) test other  |/  * c739dd68a7 Foo Bar So you now need to rebase your changes on the origin/martins-test-1 to commit them. git pull --rebase Successfully rebased and updated refs/heads/martins-test-1. git log --oneline -n3  f0d6afd90d (HEAD -> martins-test-1) my changes  810b4f1bd4 (origin/martins-test-1) test other  c739dd68a7 Foo Bar The "dummy commit" is gone. Because it was identical to existing changes. Of course you should check this. If it is still there you need to drop it with git rebase -i