Difference between revisions of "GLScene/zh CN"

From Lazarus wiki
Jump to navigationJump to search
Line 144: Line 144:
 
* '''完成安装:'''
 
* '''完成安装:'''
 
** 复制 "lazarus/components/glscene/globallinks/*.lpl" 到 "lazarus/packager/globallinks/"
 
** 复制 "lazarus/components/glscene/globallinks/*.lpl" 到 "lazarus/packager/globallinks/"
** 打开 lazarus
+
** 打开 Lazarus
 
** 在"包"菜单下选择 "配置已经安装的包 ..."
 
** 在"包"菜单下选择 "配置已经安装的包 ..."
 
** 在 "Available packages(可用的软件包)" 中选择 "glscenelazarus"
 
** 在 "Available packages(可用的软件包)" 中选择 "glscenelazarus"
Line 154: Line 154:
 
*** 在"Required Packages(所需的软件包)"列表中移除"jpegfromlazarus"
 
*** 在"Required Packages(所需的软件包)"列表中移除"jpegfromlazarus"
 
*** 查看"jpeg"单元,在/lazarus/components/glscene/Source/base,替换"LazJPEG"(在uses部分)为"LazJPG"(ImagesForLazarus包)
 
*** 查看"jpeg"单元,在/lazarus/components/glscene/Source/base,替换"LazJPEG"(在uses部分)为"LazJPG"(ImagesForLazarus包)
*** Save and repeat last 4 steps again.
+
*** 保存并重复上述四个步骤。
 
*** 提示:你应该安装了"ImagesForLazarus"包,如果没有,操作方式和安装"glscenelazarus"类似。
 
*** 提示:你应该安装了"ImagesForLazarus"包,如果没有,操作方式和安装"glscenelazarus"类似。
** repeat the last 4 steps for the other packages you want to use.
+
** 重复上述4个步骤安装你需要的软件包。
*** Note: glsceneode and glscenecgshader need their respective libs on the system during installation!
+
*** 注:在glsceneode和glscenecgshader安装时,需要将相关的库安装在系统上。
** '''Note:''' you can also try to select and install all packages in one go. However, I prefer to do things step by step, so I see where it fails, if it fails ;)
+
** ''':'''你可以尝试选择一个或全部软件包。不过,我喜欢一个一个安装,这样可以查看它的错误,如果出现错误的话;)
** '''Install "glscenelazarus" - mistakes:''' (only needed when using glscene-1.0.0.2.zip, in svn these are already fixed)
+
** '''安装 "glscenelazarus" - 错误:''' (只需要使用glscene-1.0.0.2.zip,在SVN中这些已经修订)
***To correct the unit GLLCLViewer: procedure TGLSceneViewer.CreateParams(var Params: TCreateParams); - at procedure TGLSceneViewerLCL.CreateParams(var Params: TCreateParams);
+
***更正单元 GLLCLViewer: procedure TGLSceneViewer.CreateParams(var Params: TCreateParams); - procedure TGLSceneViewerLCL.CreateParams(var Params: TCreateParams);
***To correct the unit GLLCLViewer: procedure TGLSceneViewer.EraseBackground(DC: HDC); - at procedure TGLSceneViewerLCL.EraseBackground(DC: HDC);
+
***更正单元 GLLCLViewer: procedure TGLSceneViewer.EraseBackground(DC: HDC); - procedure TGLSceneViewerLCL.EraseBackground(DC: HDC);
***To correct the unit GLLCLFullscreenViewer: Change "RegisterClasses([TGLSceneViewer, TGLFullScreenViewer]);" to "RegisterClasses([TGLFullScreenViewer]);"
+
***更正单元 GLLCLFullscreenViewer: Change "RegisterClasses([TGLSceneViewer, TGLFullScreenViewer]);" "RegisterClasses([TGLFullScreenViewer]);"
  
 
* '''软件包列表:'''
 
* '''软件包列表:'''
Line 171: Line 171:
 
** '''gls_winonly'''        仅Windows,包含声音支持mmsystem,BASS支持和GLScreenSaver组件
 
** '''gls_winonly'''        仅Windows,包含声音支持mmsystem,BASS支持和GLScreenSaver组件
  
* '''Сompilation "demo" - mistakes:'''
+
* '''编译 "演示" - 错误:'''
**If not found class - TGLSceneViewer: To correct the uses (demo): GLLCLViewer - at GLViewer
+
**如果未找到类 - TGLSceneViewer:修改(演示)GLLCLViewer - GLViewer
  
 
=== 安装 0.9.6.1 ===
 
=== 安装 0.9.6.1 ===

Revision as of 07:27, 17 April 2014

Deutsch (de) English (en) français (fr) Bahasa Indonesia (id) 日本語 (ja) 한국어 (ko) português (pt) русский (ru) 中文(中国大陆)‎ (zh_CN)

关于

GLScene是一个基于OpenGL的3D库。它最初是为Delphi编写的,现在它可以工作C+ + Builder、Kylix、Delphi和Lazarus中。

其主要的特征是:

场景描述

  • hierarchical objects structure, with as many objects as memory allows, easily extendable
  • 互动场景管理(许多 Delphi 专家)
  • 易于使用的对象旋转、运动功能。
  • 预定义的对象(立方到茶壶、雪碧等),易于扩展
  • structural objects (dummy cube, proxy object) for manageing composite objects
  • procedural objects (heightfield, revolution solids, pipes, tesselators...)
  • support for 2D and 1D objects (sprites, lines with spline support) fully integrated
  • HUD objects (sprites rendered in 2D coordinates)
  • Utility objects (grids, skydome, arrows...)
  • support classes for directly accessing OpenGL
  • camera and light objects that can be used anywhere in a scene objects hierarchy
  • behaviour objects can be attached to objects for animation purposes, easily extendable
  • per-object special effects (before/after object rendering and scene after-effects), easily *extendable
  • support for particle systems, any object or object structure can be a particle
  • 3D Studio file import with automatic and precise normal vector calculation (using the given *smoothing groups of the file) and texture coordinate import
  • Other imported formats : OBJ/OBJF, SMD, MD2, STL, TIN, PLY

材料(Materials)

  • easy to use, optimized, material object
  • material library to share and reuse materials
  • ambient, diffuse, emission, specular and shininess support
  • support of blending modes (transparency, additive...)
  • alpha-channel auto-generation
  • support for OpenGL texture formats, including compressed ones (DXT, S3TC etc.)
  • generic plug-in shaders support
  • High-level Cg shaders support classes
  • polymorphic image support for texturing (allows many formats as well as procedural textures), easily extendable
  • more than 150 predefined colors like clrCornflowerBlue or clrCoolCopper (easily extendable) *in addition to standard colors and direct RGBA specifications
  • easily to use texture movement and scaling properties, independently from texture coordinates
  • 32 bits Bitmap support class

渲染

  • automatically uses the hardware OpenGL driver if available
  • a well working camera model using focal length and targeting
  • multiple viewers for one or more scenes, easy change of view through camera selection
  • fog and depth-of-view support
  • render to a file, a bitmap or to the printer in any color and pixel resolution
  • full screen support with dynamic resolution changes
  • reflections and mirror effects
  • dynamic shadow casting
  • high-performance scene-wide transparent particles system support
  • automatic frustrum culling (hierarchical or per-object)

动画

  • propagation of time progression events
  • 骨骼动画(每个顶点多个骨骼)
  • frame interpolation and morph targets
  • 易于行为扩展
  • 动态物理:惯性,加速度,阻力中的应用
  • automatic, realtime scene cadenceing

接口

  • 易于使用的功能方便拾取对象
  • 摄像机运动辅助函数
  • 拾取对象平移辅助函数
  • 用于屏幕和世界坐标系之间的转换,光线投射

实用程序(Utilities)

  • optimized geometry functions and utilities (vector, quaternion and matrix...)
  • cubic spline support functions and class
  • mesh manipulation and optimization (stripification, vertex-cache awareness, etc.)
  • component to make full-featured screen-saver in a few clicks
  • precise frame speed determination
  • 异步定时器(多线程)
  • 操纵杆支持
  • 异步键盘接入,支持键盘映射

截图

Gl effect.jpg Gl cel.jpg Gl trinity.jpg
Gl ode.jpg

作者

作者: initially Mike Lischke 这段时间由 Eric Grange维护 LCL 接口: Christian Ulrich

下载

分支

一个大的更新(截止 2012-05-03)GLScene在:wiki.glscene.info

最新 (v1.0.0.2)

This should be almost identical to the original cvs repository of today in terms of functionality and bugfixes, however, there are still some parts missing. There wont be a "Lazarus-with-GLScene-Installer" with this new release, unless someone else creates it. --Crossbuilder 20:16, 18 July 2007 (CEST)

过时

An older release (version 0.9.1.6) can be found on the Lazarus CCR Files page together with a lazarus installer with GLScene already in the Lazarus IDE and GLScene demoes. UPDATE: This is pretty old now. If possible, use the svn checkout (see below).

SVN

在这里检出源文件 http://svn.freepascal.org/svn/fpcprojects/glscene/trunk/

使用命令:

svn co http://svn.freepascal.org/svn/fpcprojects/glscene/trunk glscene

这将下载分支到你的glscene目录。

你Windows你可以使用tortoise SVN或其它工具。

Bug报告

Bug反馈/功能要求 请选择"Lazarus-ccr"项目中的"glscene"分类,感谢。

更新日志

  • 18.07.2007 快照发布版本 1.0.0.2
    • 调整了些东西,它能工作在最新的lazarus SVN版本
    • 添加位图对象到SceneEditor
    • 修正SceneEditor中另一个AV
    • incorporated all patches and bugfixes from original glscene cvs repo like dynamic textures ..
  • 13.06.2007 快照发布版本 1.0.0.1
    • incorporated all patches and bugfixes from original glscene cvs repo
    • improved scene editor (crashes less, but still needs some love)
      Tip: Save your project frequently ;-)
    • seperated mmsystem dependent stuff from generic sound support so e.g. FMOD is available in linux, too
    • 更多 ..
  • 01.12.06 Added support for ODE, gtk2 and Cg shaders in Linux (ODE is limited to normal release, unsupported are cone, ccylinder and terrains)
  • 10.08.05 Too many changes to post here see cvs history
  • 16.07.05 GLScene 0.9.X Port
  • 查看GLScene SourceForge帐户的完整日志

状态: Beta

安装 1.0.0.2

需要FPC 2.1.4或更高版本,及lazarus0.9.23以上。11348或更高 !!

  • 提取源文件
    • ZIP:
      • 在 "lazarus/components/" 下执行 "unzip glscene-1.0.0.2.zip",这将创建 lazarus/components/glscene/ 文件夹
    • SVN:
      • 在 "lazarus/components/" 下执行
        svn co http://svn.freepascal.org/svn/fpcprojects/glscene/trunk glscene
        ,这将创建 lazarus/componets/glscene/ 文件夹
      • Tortoise SVN: 手动在lazarus/components/下创建文件夹 "glscene", 右击文件夹的空白处选择TortoiseSVN下的 "SVN Checkout(检出)...",在 "URL of repository(版本库URL)"中添加
        http://svn.freepascal.org/svn/fpcprojects/glscene/trunk
        并确定。
  • 完成安装:
    • 复制 "lazarus/components/glscene/globallinks/*.lpl" 到 "lazarus/packager/globallinks/"
    • 打开 Lazarus
    • 在"包"菜单下选择 "配置已经安装的包 ..."
    • 在 "Available packages(可用的软件包)" 中选择 "glscenelazarus"
    • 点击 "安装所选" 按钮
    • 点击 "保存并重建IDE" 按钮
      • 注意:有可能会出现"jpegforlazarus"未找到的错误。如果是的话,你可以执行以下操作:
      • 包菜单 --> 打开包文件...
      • 选择 "glscenelazarus" (版本 1.0.0.3) 后点击 "打开..."
      • 在"Required Packages(所需的软件包)"列表中移除"jpegfromlazarus"
      • 查看"jpeg"单元,在/lazarus/components/glscene/Source/base,替换"LazJPEG"(在uses部分)为"LazJPG"(ImagesForLazarus包)
      • 保存并重复上述四个步骤。
      • 提示:你应该安装了"ImagesForLazarus"包,如果没有,操作方式和安装"glscenelazarus"类似。
    • 重复上述4个步骤安装你需要的软件包。
      • 注:在glsceneode和glscenecgshader安装时,需要将相关的库安装在系统上。
    • 注:你可以尝试选择一个或全部软件包。不过,我喜欢一个一个安装,这样可以查看它的错误,如果出现错误的话;)
    • 安装 "glscenelazarus" - 错误: (只需要使用glscene-1.0.0.2.zip,在SVN中这些已经修订)
      • 更正单元 GLLCLViewer: procedure TGLSceneViewer.CreateParams(var Params: TCreateParams); - 在 procedure TGLSceneViewerLCL.CreateParams(var Params: TCreateParams);
      • 更正单元 GLLCLViewer: procedure TGLSceneViewer.EraseBackground(DC: HDC); - 在 procedure TGLSceneViewerLCL.EraseBackground(DC: HDC);
      • 更正单元 GLLCLFullscreenViewer: Change "RegisterClasses([TGLSceneViewer, TGLFullScreenViewer]);" 为 "RegisterClasses([TGLFullScreenViewer]);"
  • 软件包列表:
    • glscenelazarus 主要包
    • glscenecgshader Cg 渲染组件
    • glsceneode ODE 组件
    • glss_fmodlaz FMOD 组件
    • gls_winonly 仅Windows,包含声音支持mmsystem,BASS支持和GLScreenSaver组件
  • 编译 "演示" - 错误:
    • 如果未找到类 - TGLSceneViewer:修改(演示)GLLCLViewer - 为 GLViewer

安装 0.9.6.1

  • 创建目录 lazarus\components\GLScene
  • 在目录中解压zip文件
  • 打开 Lazarus
  • 在组件/打开包文件(.lpk)中,选择lazarus\components\glscene\Lazarus下的glscenelazarus.lpk
  • (点击编译是必须的,如果你不想安装组件到IDE)
  • 点击安装
  • 要使用其他软件包重复这些步骤(打开.lpk,点击安装),注:这些额外的包需要额外的库(FMOD、ODE、CG)。
    • glscenecgshader.lpk : Cg着色器(仅适用于NVidia显卡?)
    • glsceneode.lpk : 对ODE库支持
    • glsss_fmodlaz.lpk : 对FMOD库支持
    • gls_winonly.lpk : 只可以安装在Windows上。包含屏幕保护以以及BASS库支持。

提示:如果出现“GLGraphics 未找到”的错误,不要担心,只要在工具中重新构建Lazarus,或许就可以解决。

Lazasrus中安全安装GLScene 可以查看:二进制Win32发布http://www.skinhat.com/lazarus

对于Linux新用户只是个警告: GLScene目前并不能“拿来就用”,需要做些添加或修改。

更新:这个不准确了。Lazarus中的Glscene 是相当出色的,可以实现在Windows及Linux中“拿来就用”。

新的trunk 版本(见上文SVN)在Linux上正常工作,一些演示(约20%)不能正常使用,但大多可以使用。我们也在努力着让它可以在其他Unix平台上完美运行。

在非Windows丢失/不能工作的组件是:glKeyboard (使用WINAPI,但不是必须的居多)、glSound(使用mm,我们需要使用OpenAL或者类似的)。

一个 全功能的Windows安装程序 计划。

帮助

  • 可以在 GLScene 首页 找到
  • 联系 #glscene channel at freenode.net