Installing Lazarus/sk

From Lazarus wiki
Jump to navigationJump to search

Úvod

Pre tých, ktorí jednoducho chcú nainštalovať Lazarus a začať ho používať pre programovanie, je najjednoduchším prístupom stiahnuť a nainštalovať najnovšiu, podľa možností stabilnú, binárnu verziu (linuxový balíček ".rpm alebo windowsový balíček ".exe"). Môžete si prečíteť časti pod Linux alebo Windows nazvané "fpc binaries" alebo prvé odstavece v časti o inštalácii Lazarus v Linuxe alebo vo Windows; väčšinu ostatných informácií môžete kľudne ignorovať.

Tí, ktorí sa chcú spolupracovať pri vývoji prekladača alebo IDE, alebo chcú mať najaktuálnejšie nástroje, budú potrebovať inštaláciu zo zdrojových súborov a väčšina zvyšných informácií je pre nich relevantná.

Lazarus pozostáva z dvoch základných častí:

  • LCL - knižnica komponentov Lazarus (Lazarus Component Library)
  • IDE - Integrované vývojové prostredie

Tieto v podstate závisia na:

  • FreePascal – prekladač FreePascal
  • FCL – knižnica komponentov FreePascal (FreePascal Component library,obsahujúca väčšinu nevizuálnych komponentov použitých v Lazarus

Systémové požiadavky Lazarus

  1. prekladač FreePascal, balíčky a zdrojové kódy (*dôležité* rovnakej verzie/dátumu)
  2. podporovaný Widget tool-kit
    Win32
    : môže byť použité pôvodné Win32 API
    Linux/xxxBSD
    GTK+ 1.2.x : Most Linux distributions and *BSDs already install the GTK+ 1.2.x libraries. You can also find them at http://www.gtk.org.
    You'll also want gdk-pixbuf, 0.13 or newer (preferably 0.18 or newer), which is also found in most recent distributions from the past 2 years. The source is available from ftp://ftp.gnome.org/pub/GNOME/sources/gdk-pixbuf/
    Mac OS X
    GTK+ 1.2.x : You need the apple developer tools, X11 and GTK1.2. See below Installing under Mac OS X.
    GTK+ 2.x
    WARNING : The GTK2 interface is not yet complete and is only for testing purposes.
    It's found in most recent distributions. For the source see http://www.gtk.org.

FAQ - Najčastejšiekladené otázky sú dostupné na http://www.lazarus.freepascal.org . Niektoré z otázok môžete nájsť v lokálnom súbore 'FAQ'.

Nasledujúce časti popisujú ako získať FreePascal a ako správne nainštalovať Lazarus.

Inštalácia prekladača FreePascal

Rozsiahla diskusia o inštalácii a budovaní prekladačov FreePascal je dostupná na http://www.stack.nl/~marcov/buildfaq.pdf - pre niektorých užívateľov môže byť zbytočne podrobná, ale je dostatočne vyčerpávajúca.

Lazarus vyžaduje FreePascal verzie 1.9.x a vyžaduje ako preložené knižnice FreePascal (binárne súbory), tak aj zdrojové kódy rovnakej verzie. FreePascal 1.0.6 je veľmi mladý a FreePascal 1.0.10 má problémy s otváraním formulárov vytvorených pomocou FreePascal 1.9.x.

Inštalácia Free Pascalu pod Linuxom

Binárky FPC

V downloadoch na stránke (http://www.lazarus.freepascal.org) môžete stiahnuť RPM Free Pascalu (prekladač / linux) a jeho balíky. Ak nemáte distribúciu podporujúcu RPM, môžete stiahnuť tar súbory so stránky http://www.freepascal.org. Ak si chcete prekladač skompilovať sami, pozrite sa na BSD sekciu.

Povely:

Stiahnite si poslednú verziu súborov z http://sourceforge.net/project/showfiles.php?group_id=89339. Ako príklad:

  • fpc-1.9.5-040808.i386.rpm
  • fpcsrc-1.9.5-040808.i386.rpm
  • lazarus-0.9.2.1-fpc_1.9.5_040808.i386.rpm

a nainštalujťe ich príkazmi

  • rpm -Uvh fpc-1.9.5-040808.i386.rpm
  • rpm -Uvh fpcsrc-1.9.5-040808.i386.rpm
  • rpm -Uvh lazarus-0.9.2.1-fpc_1.9.5_040808.i386.rpm

Denné verzie Debianských balíkov môžete stiahnut na http://cYcnus.de/deb/. V súčasnosti obsahujú len skompilované fpc komponenty avšak nie zdrojový kód, ktorý je na prácu s Lazarusom potrebný.

Zdrojové kódy FPC

Najľahší spôsob ako získat FPC zdrojové kódy je pomocou CVS. Môžete ich stiahnut ako jednotlivý balík: pozri http://www.freepascal.org/develop.html pre dennú verziu vydania 1.9.x.

Sťahovanie poslednej verzie zdrojových kódov pomocou CVS

Vytvorte si adresár v ktorom chcete mať zdrojové kódy. Nemusíte byt root aby ste to spravili. Každý obyčajný používaťel má tieto práva vo svojom home adresári. Najprv vytvorte adresár pre FPC (napr. /home/username/freepascal) a potom spravťe nasledujúce:

[]$ bash
[]$ export CVSROOT=:pserver:cvs@cvs.freepascal.org:/FPC/CVS
[]$ cvs login   // heslo je 'cvs' bez úvodzoviek.
[]$ cvs -z3 co fpc   // toto vytvorí adresár 'fpc', ktorý sa neskôr bude používať v IDE

Rada: Na update na poslednú verziu stačí

[]$ cd /home/username/freepascal/fpc
[]$ cvs -z3 update -dP

Inštalácia Free Pascal vo Windows

Binárne súbory FPC pre Windows

Najjednoduchším spôsobom ako získať fungujúcu inštaláciu FreePascal je stiahnuť si aktuálnu release binárnych súborov Lazarus pre Windows zo SourceForge.net – release obsahuje aktuálnu verziu prekladača FreePascal a knižnice FreePascal, ako aj Lazarus IDE. Ak však chcete inštalovať zo zdrojových súborov, čítajte ďalej!

Inštalačný zip FreePascal 1.9.3 môžete získať v časti download na FreePascal. Popis inštalácie zo zdrojových súborov je v nasledujúcej časti, ale táto inštalácia nie je vhodná pre začiatočníkov, pretože potrebujete aj počiatočný prekladač.

Zdrojové kódy FPC pre Windows

Najjednoduchší spôsob ako získať zdrojové kódy FreePascal je pomocou CVS. Zdrojové kódy môžete tiež stiahnuť ako celý balíček – pozrite http://www.freepascal.org/develop.html, kde je strom dennej snímky release 1.9.x.

Zdrojové kódy FPC pomocou CVS

Na vykonanie nasledujúcich krokov budete potrebovať klienta CVS, napr. TortoiseCVS alebo WinCVS. Presné príkazy sa môžu medzi klientami meniť; nasledujúce sú pre použitie s klientom CVS home.

Najprv si vytvorte adresár, do ktorého radi umiestnili zdrojové súbory. (napr. c:\source), potom do príkazového riadku zadajte tieto príkazy:

 C:\Source> set CVSROOT=:pserver:cvs@cvs.freepascal.org:/FPC/CVS
 C:\Source> cvs login      // heslo je 'cvs' bez apostrofov
 C:\source> cvs -z3 co fpc // týmto vytvoríte adresár fpc, ktorý neskôr použijete v IDE.

Typ: Pre stiahnutie/aktualizáciu posledných zmien jednoducho zadajte:

 C:\> cd Source\FPC
 C:\Source\FPC> cvs -z3 update -dP

ToDo: Write me.

Pozrite si http://www.freepascal.org/down-win32.html Zoznam zrkadiel nájdete na http://www.freepascal.org/sdown.html. Stiahnute FreePascal ako jeden veľký súbor, rozbaľte ho a spusťte install.exe.

Do systémovej premennej PATH pridajte adresár fpc:

  • Win98: Upravte autoexec.bat pridaním riadku: PATH=%PATH%;C:\pp\bin\bin\win32
  • WinXP/2k: Tento počítač (pravý klik) -> Vlastnosti -> Spresnenie (stránka) -> Premenné prostredia -> Systémové premenné -> Upravte "PATH" pridaním "C:\pp\bin\bin\win32".

Potom reštartujte Windows.

ToDo: Explain how to download fpc sources and build the compiler

Inštalácia Free Pascalu pod BSD/manuálne

Všetko čo potrebujete sú:

Súbor so všetkými zrojákmi prípadne dva (fpc a lazarus)

1. napr. pre fpc ftp://ftp.freepascal.org/fpc/dist/Linux/separate/sources.tar najlepšie export (žiadne CVS/ adresáre). Tento súbor to nemá
2. Denné zdrojáky Lazarus.

  • _hocaký_ štartovací prekladač od vydania 1.9) Verziu si môžete overiť pomocou príkazu "ppc386 -i". Ak je výstup 1.9.3 až 2.0.x tak je všetko vporiadku.
  • - závislosti. (pre FreeBSD je to gtk12, glib12 a gdk_pixbuf a ešte GNU make, iconv a gettext)

Kompilácia FPC:

1. (zožente) potrebné súbory (FPC zdrojáky, štartovací prekladač) 2. (rozbalte) A potom od-tgz-ujte vo vašom pracovonom adresári, 3. (skompilujte) choďte do work/fpc/ a spustite

 $MAKE all OPT='-gl -O3p3'  PP=/cesta/k/štartovaciemukompileru-meno-ppc386
(/cesta/k/.. môže byť vynechaná ak máte ppc386 v ceste(PATH))
($MAKE je make v linuxe a gmake na BSD)

4. (nainštalujte) vo work/fpc spusťte

$MAKE install PP=compiler/ppc386 PREFIX=$THEPREFIX
(THEPREFIX= je väčšinou /usr/lcoal, ale napr. na NetBSD je to /usr/pkg kvôli portom)
Vytvorte symbolickú linku:
  ln -s $THEPREFIX/lib/fpc/1.0.8/ppc386 $THEPREFIX/bin/ppc386
     install sourceinstall PREFIX=$THEPREFIX

5. (nastavťe) spustite compiler/utils/samplecfg $THEPREFIX/lib/fpc/1.9.3 $ETCDIR 6. (nepovinne, testujte), presvečte sa či ppc386 -i dáva výstup, ináč musíte pridať $PREFIX/bin do vašej cesty. Skúsťe skompilovať program s parametrami -viwn, a pozrite či nepíše chyby. Poznámky:

  • Ak potrebujete fpcmake balíkové listy, musíte si ich sami vygenerovať alebo zohnať, v každom prípade spravte pokusnú inštaláciu do /tmp/pack a zistite či sa súbori nainštalovali pomocou find . >ll
  • $THEPREFIX a $ETCDIR by mali byť nastaviteľné uživateľom. Inak niesu možné lokálne inštalácie.
  • BSDHIER=1 pri všetkých príkazoch make núti hierarchické konvencie BSD.

Inštalácia Free Pascalu pod Mac OS X

Potrebujete Apple Developer-tools, X11, gtk1.2:

Sťahovanie a následná inštalácia balíkov može byť zdĺhavá činnosť. Preto je viacero manažérov balíkov. Jeden z nich je fink:

Stiahnite si fink z http://fink.sourceforge.net/download/index.php?phpLang=en;

Developer-tools: Sa nachádzaju na inštalačnom CD OSX, príp. ich môžete stiahnuť z ADC (registrácia zdarma je nutná)

http://developer.apple.com/.

Apple X11: Na novonahodenom systéme: vyberte "Customize" v inštalačnom dialógu a zaškrtnite "X11".

Na už nainštalovanom systéme: stiahnite z

http://www.apple.com/downloads/macosx/apple/x11formacosx.html

V termináli spusťte

       sudo fink install gtk-pixbuf gtk+ gtk+-data gtk+-shlibs gtk-doc 1.2-13 gtkglarea gtk-engines

X11-Application sa nachádza v /Applications/Utilities/X11.

Rada: Väčšina X11 programov vrátane lazarusa očakávujú príjem focusu keď uživateľ klikne na okno. Na MacOSX je toto vypnuté. Môžete to zapnúť pre všetky X11 aplikácie ak napíšete do terminálu:

       defaults write com.apple.x11 wm_click_through -bool true
Prekladač Free Pascal

Potom si stiahnite a nainštalujte prekladač Free Pascal (aspoň verziu 1.9.5 z 16. augusta 2004) z

https://sourceforge.net/project/showfiles.php?group_id=89339

Pre lazarus potrebujete aj zdrojáky FPC: Vytvorte si adresár kam chcete dať zdrojáky. Nemusíte byť root aby ste to spravili. Najprv vytvorte adresár pre FPC.

(napr. /Users/username/freepascal)

potom do terminálu napíšte následovné:

[]$ bash
[]$ export CVSROOT=:pserver:cvs@cvs.freepascal.org:/FPC/CVS
[]$ cvs login

heslo je 'cvs' bez úvodzoviek

[]$ cvs -z3 co fpc

Toto vytvorí adresár 'fpc' ktorý bude IDE používať
Rada: Na update vám stačí spraviť

[]$ cd /Users/username/freepascal/fpc
[]$ cvs -z3 update -dP

Inštalácia Lazarus

Installing Lazarus under Linux

The easiest way to get a current working installation of Lazarus is to download the RPMs for FreePascal and Lazarus from the SourceForge repository.

You need to download the selected version of

  • the compiler (eg fpc-1.9.5-041207.i386.rpm)
  • the pascal source library (eg fpcsrc-1.9.5-041207.i386.rpm)
  • the Lazarus package (eg lazarus-0.9.2.4-fpc_1.9.5_041207.i386.rpm).

You then issue the following commands (you need to have root privileges - use su or sudo)

rpm -Uvh fpc-1.9.5-041207.i386.rpm
rpm -Uvh fpcsrc-1.9.5-041207.i386.rpm
rpm -Uvh lazarus-0.9.2.4-fpc_1.9.5_041207.i386.rpm

If you prefer to install from source and compile the files yourself, follow these instructions. Because the whole lazarus stuff is installed into one directory, uninstall is very easy and you don't need to be root to install lazarus. You can get tgz files for fpc, fpcsrc and lazarus from the downloads section or you can download it directly via cvs.

Downloading lazarus cvs

cvs provides an easy way to update your sources by only downloading the changes. This is the recommended way and saves you a lot of time. A connection to the internet is needed for this: You don't to be root. Lazarus does not need any special permissions, neither during installation nor at runtime. First create a directory for lazarus (e.g. /home/username/freepascal) then do the following:

connect to the cvs server (note
lazarus and freepascal use the same server)
[]$ export CVSROOT=:pserver:cvs@cvs.freepascal.org:/FPC/CVS
[]$ cvs login

password is 'cvs' without the .

download the lazarus sources
[]$ cvs -z3 co lazarus

compile lazarus:

[]$ cd lazarus
[]$ make  (gmake on BSD)

If fpc is installed correctly, the compilation should work without problems. If not, see FAQ.

Start lazarus
[]$ ./lazarus

The IDE should start. If you started lazarus in a terminal, you can see some notes about missing settings. This is normal at first start. The IDE automatically tries to find out where the freepascal compiler and its sources are installed by searching in the most common directories.

Check the paths
Use the IDE menu to go to
Environment -> Environment Options -> Files

The 'FPC Source directory' should point to your fpc source directory. This directory normally ends with /fpc/ or /fpcsrc/ (e.g. /usr/src/fpcsrc or /home/username/freepascal/fpc) and contains directories like 'compiler', 'docs', 'fcl', 'rtl' and 'packages'.

ToDo: explain the other paths

Hint

To update lazarus you can use

[]$ cd /home/username/freepascal/lazarus
[]$ cvs -z3 update -dP
[]$ make clean all   (gmake on BSD)

This will rebuild lazarus and create an IDE without lazarus packages. To link your installed packages do after the above:

[]$ make idepkg

Installing Lazarus under Debian GNU/Linux

There are preliminary Debian packages for lazarus available for download. Make sure you read /usr/share/doc/lazarus/README.Debian carefully before you start using it. Feedback is needed and appreciated; please send your comments to Carlos Laviola <claviola@debian.org>.

Another (?easier) way to install Lazarus under Debian

Added by User:Kirkpatc.

Simple Lazarus Installation in Debian

(assume new Debian installation, without development libraries loaded)

From sourceforge repository, download latest fpc, fpclib and lazarus releases; follow links from http://lazarus.freepascal.org, click the "downloads" button on the left, then click on "binaries" then "linux" then "Current Lazarus RPM". This will bring you to

http://sourceforge.net/project/showfiles.php?group_id=89339

then download the following files (or more recent, if available)

  • fpc-1.9.5-041001.i386.rpm
  • fpcsrc-1.9.5-041001.i386.rpm
  • lazarus-0.9.2.2-fpc_1.9.5_041001.i386.rpm

cd to the directory where these files are stored, then become root (su) and type:

alien fpc*     //this will convert both the fpc and fpcsrc files to debian format
alien laz*

then use kpackage or a similar utility to install the fpc, fpcsrc and lazarus **.rpm.deb files.

You need to produce a configuration file, which will reside in /etc/fpc.cfg. Still as root, cd to the main fpc directory /usr/lib/fpc/1.9.5 and then type

sh ./samplecfg /usr/lib/fpc/1.9.5 /etc

Check the contents of your new configuration file (cat /etc/fpc.cfg) and make any changes you want using vi or another text editor.

You need to install the development packages of the GTK and pixbuf libraries, so

apt-get install libgtk2.0-dev
apt-get install libgdk-pixbuf-dev

Then you should be ready to start programming!

Installing Lazarus under Mac OS X

Works pretty much the same as under Linux. But you need to install first the apple developer tools and X11:

Inštalácia Lazarus vo Windows

Aktuálna release binárnych balíčkov Lazarus pre Windows sa inštaluje veľmi jednoducho. Binárny balíček pre Linux i Windows je dostupný z SourceForge.net

Stiahnite poslednú verziu (momentálne (currently Lazarus-0.9.2.4-20041210-win32.exe) a spusťte aplikáciu. Dostanete sa do typickej inštalácie Windows, v ktorej sú prekladač FreePascal a zdrojové knižnice nainštalované do rovnakej adresárovej štruktúry ako Lazarus a môžete spustiť IDE a pracovať bez väčších problémov, za predpokladu, že máte odinštalovanú predchádzajúcu verziu Lazarus a/alebo FreePascal (väčšinou v adresári C:\pp).

Lazarus Snapshot pre Windows nájdete aj na: http://www.ca.freepascal.org/Lazarus/

Inštalácia so zdrojových súborov

Ak dávate prednosť inštalácii zo zdrojových kódov, postupujte podľa nasledujúcich inštrukcií (Vďaka, Joe, za tento popis Krok za krokom)

ToDo: pôvodná adresa ftp://ftp.freepascal.org/pub/fpc/source/lazarus.zip nefunguje, ale neviem či ide o to isté...

  • archív rozbaľte, napr. do c:\Lazarus. Potrebujete mať nainštalovaný aspoň FreePascal-1.9.3, ktorým preložíte zdrojové kódy a Lazarus.exe pracuje. Cesta k môjmu (pôv. autorora) FreePascal je c:\pp\bin\win32. V tomto adresári nájdete viacero spustiteľných súborov (make, grep, ppc386 atď.).
  • Otvorte konzolu (príkazový riadok) a zadajte:
cd c:\lazarus
set path=c:\pp\bin\win32;c:\lazarus  //samozrejme zmeňte na svoju cestu
windres -i lazarus.rc -o lazarus.res
make

Ak všetko prebehne ako má, napíšte Lazarus.exe. Editor zdrojového kódu, dialógy a editor vlastností pracuje, ale nie perfektne... Pozrite sa a uvidíte.

Môžete tiež preložiť príklady:

cd examples
make

Ak rozbalíte Lazarus na iný disk, napr.: d:\Lazarus. Môže sa stať, že budete potrebovať utilitu gnu na jeho vytvorenie, ak ju máte, zadajte jej cestu do premennej Path, ale jednoduchšie je nevyberať iný disk.

To je všetko.

Additional experiences and advice on installing FPC and Lazarus

On linux, getting Lazarus to work can be complicated. If you have already installed earlier versions of FPC and/or Lazarus, you have to take great care that the PATHS are adjusted so that only your new versions are called.

Pitfalls that I have experienced in various attempts with SuSE linux include:

The rpm versions often install FPC in /bin or /usr/bin, with the libraries in /lib or /usr/lib.

If you perform a make install on a source version or use a .tar.gz, the compiler is usually installed in /usr/local/bin with the libraries in /usr/local/lib.

So if earlier versions have been installed from rpm, make sure all links are changed to reflect the directory structure of your new compiler. The place to make the changes is in /etc/fpc.cfg ; make sure there are no remnant configuration files in your home directory or in your FPC download directory. Typically they are found in ~/.fpc.cfg

Make sure the links in /etc/fpc.cfg point to the correct versions of the libraries (particularly if you have older versions still lurking around).

In /usr/local/bin or /usr/bin there is a file called fpc ; this is the executable that is called when you invoke the compiler. One of the first things it does is to open ppc386 in the same directory. This has to be the same version as the fpc file, or can be a link pointing to the true ppc386 in some other directory (such as a library directory, or the fpc directory in your own development space); be sure to update your link if you install a newer version of the compiler.

Try running the compiler from the command line using one of the simple example programs or one which you wrote yourself.

Turning to Lazarus:

If you use a downloaded snapshot (.tar.gz) or get the source from CVS, enter your lazarus directory and type

make
./lazarus 

and hopefully the IDE should load. There may be a message saying it can't find the sources; if so, go to the menu at the top and select Environment -> Environment options and insert the name of the directory where you expect to find your lazarus files (eg ~/FreePascal/lazarus), your compiler (eg /usr/local/bin/ppc386), the FreePascal source directory (eg /usr/local/lib/fpc/$version/fpc or a directory in your own space eg ~/FreePascal/fpc). Then close the dialog and start programming.

You may find further problems when you start programming or compiling; most of these will be related to PATH selection.

Many of the difficulties are dealt with in the Lazarus FAQ, found either on this WiKi site, or a more complete list on the main Lazarus site

http://www.lazarus.freepascal.org/modules.php?op=modload&name=FAQ&file=index

From the top menu select Run -> Compiler Options (or Project -> Compiler Options in more recent releases of Lazarus) and select the Paths tab on the resulting dialog. There are several boxes for entry of paths for Unit files, Include files, Other source files, Libraries etc. For each of these, it is worth pressing the ... (ellipsis) button on the right, and you will be given a blank window for inserting path information, and a lower window giving some suggestions. Select as many as you like (or ALL!) and press the ADD button to transfer the selections to the upper window. When your selection is complete, press OK and move on to the next box. If you know of other paths which need to be followed, press the Browse button associated with each box, and insert the additional paths.

When you think you have got your paths right, try to compile your application. If there are further path-related errors ('can't find unit .......') then go back and check your paths, both in /etc/fpc.cfg and in your Run -> Compiler Options dialog (or Project -> Compiler Options depending on your version).

Once you have got the environment and PATHS correct, it is worth saving the settings to a file, otherwise you will have to go through this process for each new project. In the Run -> Compiler options dialog there is a Load/Save button; select this and then save the setings to the filename of your choice: mine is ~/FreePascal/default.cfg. Then each time I start a new project, I can go to the Run -> Compiler Options dialog (or Project -> Compiler Options), select Load/Save, and load my default.cfg file to the new project. You can, of course, modify the options for each new project if you so desire.

Installing Lazarus under BSD

 Please write me!

Pôvodní spolupracovníci a zmeny

This page has been converted from the epikwiki version.

  • Initially imported and formatted. VlxAdmin 9/22/2003
  • Changed Joe's part for Windows to require fpc 1.0.10. Vincent 9/25/2003
  • Updated "What is required for lazarus". AndrewJohnson 10/1/2003
  • Finished formatted the InstallingLazarus page VlxAdmin 2/22/2004
  • Posted some notes about Installing FPC and Lazarus: mostly reflecting experiences in trying to get the PATHS right in Linux. 3/11/2004 User:Kirkpatc
  • Copied the contents of my note into the main InstallingLazarus section, edited it slightly. I don't know how to remove the original note. 3/12/2004 User:Kirkpatc
  • Removed the original note. Tidied the wiki and formatting a bit. VlxAdmin
  • Corrected a couple of typos - 3/12/2004 User:Kirkpatc
  • Added link for daily snapshot deb packages - 3/27/2004 Vincent
  • Fixed links in GettingLazarus (downloading binaries) and several other pages. 22 July 2004 User:Kirkpatc
  • Added link for lazarus deb packages - 19 August 2004 VincentSnijders
  • Added a short note on installing in Debian - 23 Nov 2004 User:Kirkpatc
  • Considerable re-write and re-organization of installation section - 11 Dec 2004 User:Kirkpatc