Difference between revisions of "OpenGL Tutorial/ja"

From Lazarus wiki
Jump to navigationJump to search
m
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{OpenGL Tutorial}}
 
{{OpenGL Tutorial}}
  
OpenGL is the premier environment for developing portable, interactive 2D and 3D graphics applications. Since its introduction in 1992, OpenGL has become the industry's most widely used and supported 2D and 3D graphics application programming interface (API), bringing thousands of applications to a wide variety of computer platforms. OpenGL fosters innovation and speeds application development by incorporating a broad set of rendering, texture mapping, special effects, and other powerful visualization functions. Developers can leverage the power of OpenGL across all popular desktop and workstation platforms, ensuring wide application deployment.
+
{{Japanese Menu}}
  
You can find more information about OpenGL [http://www.opengl.org/about/overview/ here].
+
= 概要 =
 +
OpenGLは2Dや3DのインタラクティブなグラフィックスアプリケーションをOSなどに依存せず作成できる、優れた開発環境です。OpenGLは1992年から開発がすすめられ、いまや2D、3DグラフィックスアプリケーションのAPIとしては、数多くのアプリケーションで使われ、いろんなコンピュータプラットホームで利用でき、業界標準になっています。
  
GLUT (pronounced like the glut in gluttony) is the OpenGL Utility Toolkit, a window system independent toolkit for writing OpenGL programs. It implements a simple windowing application programming interface (API) for OpenGL. GLUT makes it considerably easier to learn about and explore OpenGL programming. GLUT provides a portable API so you can write a single OpenGL program that works across all PC and workstation OS platforms.
+
OpenGLは、様々な種類のレンダリング、テクスチャマッピング、特殊効果、および他の強力なビジュアライゼーション機能を取り入れており、革新的な、アプリケーション開発を加速できます。
  
You can find more information about GLUT [http://www.opengl.org/resources/libraries/glut/ here].
+
開発者はすべてのポピュラーなデスクトップとワークステーションプラットホームに、OpenGLのパワーを利用することができますので、広いアプリケーション展開が可能になります。もっと詳しい情報は、 [http://www.opengl.org/about/overview/ OpenGLのサイト]で得ることができます。
  
Many OS comes with preinstalled GLUT, but if yours don’t have one you can easily find it using [http://www.google.com/ Google].
+
GLUTはOpenGL Utility Toolkitですの略です。OpenGLを使ったプログラムを書くために、どのようなウィンドウシステムで利用できるツールキットです。 これは、簡単なウインドウをもつOpenGLを使うプログラムで使える、アプリケーションプログラミングインターフェース(API)を実装します。(訳注:GLUTを使えば、ウインドウシステム、プラットフォームの違いを吸収してくれます。)
 +
GLUTを使えば、OpenGLプログラミングを学んだり、調査すしたりすることが簡単になります。
 +
また、いろいろなPCとワークステーション、OSにわたって動作するひとつのOpenGLプログラムに書けるのと同様に、GLUTは携帯用のAPIも提供しています。もっと詳しい情報は、 [http://www.opengl.org/resources/libraries/glut/ OpenGLのGLUTのサイト]で得ることができます。
  
Windows binaries can be downloaded from [http://www.xmission.com/~nate/glut.html www.xmission.com].
+
多くのOSにGLUTがプレインストールされています。もし、自分の環境にあったものが分からない場合は、 [http://www.google.com/ Google]で調べてみてください。
 +
 
 +
Windowsのバイナリは、[http://www.xmission.com/~nate/glut.html www.xmission.com]でダウンロードできます。
  
 
= 最初のGLUTプログラムを作ろう =
 
= 最初のGLUTプログラムを作ろう =
Line 54: Line 59:
 
最後に、<b>glutCreateWindow</b> 関数を使って、ウインドウを生成します。 これは、ウインドウを生成し、パラメータを通してキャプションを設定します。
 
最後に、<b>glutCreateWindow</b> 関数を使って、ウインドウを生成します。 これは、ウインドウを生成し、パラメータを通してキャプションを設定します。
  
As a result it will return the window's handle. This can be used with other functions that require it.
+
結果として、この関数はウインドウのハンドルを返します。これは、他の関数で必要とされて使われる事があります。
  
More about glutCreateWindow: http://www.opengl.org/resources/libraries/glut/spec3/node16.html  
+
glutCreateWindowについての情報は: http://www.opengl.org/resources/libraries/glut/spec3/node16.html  
  
Before your program can enter the main loop, you must set some callbacks. You will a need callback for drawing the window, for resizing and for getting keyboard input. These callbacks are set using <b>glutDisplayFunc</b>, <b>glutReshapeFunc</b> and <b>glutKeyboardFunc</b>.
+
プログラムがメインループにはいる前に、いくつかコールバックを設定しておきます。ウインドウを描画するとき、リサイズするとき、キーボード入力があったとき、などに、コールバックを必要とします。これらのコールバックは、<b>glutDisplayFunc</b><b>glutReshapeFunc</b> <b>glutKeyboardFunc</b>を使って設定します。
  
More about setting callbacks: http://www.opengl.org/resources/libraries/glut/spec3/node45.html#SECTION00080000000000000000  
+
コールバックについての情報は: http://www.opengl.org/resources/libraries/glut/spec3/node45.html#SECTION00080000000000000000  
  
Your drawing function might look like this:
+
描画関数は、このようになるでしょう。
  
 
  procedure DrawGLScene; cdecl;
 
  procedure DrawGLScene; cdecl;
Line 70: Line 75:
 
  end;
 
  end;
  
This will only clear the window to the background color and reset the zbuffer (don't worry about zbuffer... more about that later).
+
これは、単にウインドウをバックグラウンド色でクリアして、Zバッファをリセットします。(Zバッファについては、後で説明するので分からなくても気にしないでください。)
  
Your resize function might look like this:
+
リサイズ関数は、次のようになるでしょう。
  
 
  procedure ReSizeGLScene(Width, Height: Integer); cdecl;
 
  procedure ReSizeGLScene(Width, Height: Integer); cdecl;
Line 88: Line 93:
 
  end;
 
  end;
  
With this code, you tell OpenGL where in the window it should draw and set matrices to the desired values (matrix functions will be explained later).
+
このコードで、OpenGLにウインドウのどの部分に描画し、必要な値を適切な行列に設定することができます。
 +
(行列関数は、後で説明します。)
  
Keyboard input is evaluated with the following callback:
+
キーボード入力は、次の関数で評価されます。
  
 
  procedure GLKeyboard(Key: Byte; X, Y: Longint); cdecl;
 
  procedure GLKeyboard(Key: Byte; X, Y: Longint); cdecl;
Line 98: Line 104:
 
  end;
 
  end;
  
This function will instruct your program to exit if you press ESC key. GLUT is event driven and the only way to terminate your program is to call <b>Halt</b> inside one of your callback functions. If you close the window in some other way, it will disappear, but the program will continue to loop through the main routine indefinitely.
+
この関数はESCキーを押すとプログラムを終了するようにします。GLUTはイベントドリブンであり、プログラムを終了するためには、コールバック関数の中で<b>Halt</b>関数をコールします。
  
To start the main loop, call <b>glutMainLoop</b>. It will enter a loop that never ends, which calls all your callback functions.
+
もし、別の方法でウインドウをクローズすると、ウインドウは消えても、プログラムは見えないところでループを続けているでしょう。
  
The main part of your program might look like this:
+
メインループを開始するには、<b>glutMainLoop</b>をコールします。
 +
これは、終了しないループに突入し、コールバック関数をコールしていきます。
 +
プログラムの主要部分は次のようになるでしょう。
  
 
  const  
 
  const  
Line 134: Line 142:
 
  end.
 
  end.
  
The next tutorial will add some code that will draw a simple shape.
+
次のチュートリアルでは、少しコードを追加して、簡単な図形を書いてみます。
  
Download source code or a linux/windows executable from [http://sourceforge.net/project/showfiles.php?group_id=92177&package_id=199145 Lazarus CCR SourceForge].
+
下記でソースコードやlinux/Windowsの実行ファイルをダウンロードできます。
 +
[http://sourceforge.net/project/showfiles.php?group_id=92177&package_id=199145 Lazarus CCR SourceForge].
  
=Drawing a simple shape=
+
=単純な形状を描画する=
  
This time we shall add just a few lines of code and focus on explanation of some of the OpenGL functions.
+
今回は、少しだけコードを追加して、OpenGLの関数の説明にフォーカスします。
  
Let us explain code you allready have.
+
これまでのコードで説明します。
 
   
 
   
 
   .
 
   .
Line 155: Line 164:
 
  end;
 
  end;
  
Using <b>glMatrixMode</b> function you chose which matrix you want to change. OpenGL works with 3 matrices:
+
<b>glMatrixMode</b>関数で、変更したい行列を選択します。
<b>GL_MODELVIEW</b>: this one is used to move vertex to model space.
+
OpenGL には、3つの行列があります。
<b>GL_PROJECTION</b>: this one is used to convert 3d coordinate to 2d coordinate for finall pixel position.
+
 
<b>GL_TEXTURE</b>: this one is used to alter texture coordinates.
+
<b>GL_MODELVIEW</b>: この行列は、頂点をモデル空間へ移動するためのものです。
 +
 
 +
<b>GL_PROJECTION</b>: この行列は、3次元の位置を2次元の最終的に表示するピクセル位置に変換するためのものです。
 +
 
 +
<b>GL_TEXTURE</b>: この行列はテクスチャ座標を変換するためのものです。
 +
 
 +
いったん、変更したい行列を選択したら、行列値に影響を与える関数をコールします。
  
Once you chose matrix you want to change, you can call functions that affect matrix values. <b>glLoadIdentity</b> will reset matrix so it doesn't affect vertex position. Since almost all matrix functions multiply current matrix with a generated one, you sometimes need to clear matrix with this function.
 
  
In order to set perspective matrix, you can use <b>gluPerspective</b> function. Four parameters present the field of view, aspect ratio, near and far plane. It's that simple.
+
<b>glLoadIdentity</b> は、行列をリセットするので、頂点位置に影響をあたえなくなります。
 +
ほとんどすべての行列関数は、現在の行列に、生成した一つの行列を掛けるので、時々この関数で行列をクリアする必要があるでしょう。
 +
(訳注:glLoadIdentityは、変換行列を単位行列にする。reset(リセット)や、clear(クリアする)、というと、プログラミング的な表現では、ゼロ行列をおもいうかべそうだが、原文作者の数学的な観念の表現であると考えて、そのまま和訳した)
  
Now, you'll change model matrix... for this time, you just set it to identity.
+
視野行列を設定したいなら、 <b>gluPerspective</b> を使うことができます。4つのパラメータ(アスペクト比、視野の近い側の面、遠い側の面)、が視野をあらわします。これは、シンプルです。
  
OK... and now, the code for drawing the first shape:
+
(訳注:OpenGLの観念としては、視野は、体積としてとらえるので、視野体積として空間を捉えるとよいだろう。)
 +
それで、モデル行列を変更できます。この時点で、固有のものをセットすればよいでしょう。
 +
よろしいでしょうか。それでは、最初の形状を書いてみましょう。
  
 
  procedure DrawGLScene; cdecl;
 
  procedure DrawGLScene; cdecl;
Line 189: Line 207:
 
  end;
 
  end;
  
We have allready used glClear function. It will just reset buffers. We'll skip next two functions and head for drawing ones.
+
すでに、glClear関数は使いましたが、これは、バッファをリセットします。
 +
次の2個の関数はスキップして、描画関数に注目します。
  
 
<b>glBegin</b> marks beginning of drawing block. After this function you can start entering vertices. Parameter describes how are vertices used when drawing:
 
<b>glBegin</b> marks beginning of drawing block. After this function you can start entering vertices. Parameter describes how are vertices used when drawing:

Latest revision as of 00:42, 30 January 2009

Deutsch (de) English (en) español (es) français (fr) 日本語 (ja) 한국어 (ko) русский (ru) 中文(中国大陆)‎ (zh_CN)

日本語版メニュー
メインページ - Lazarus Documentation日本語版 - 翻訳ノート - 日本語障害情報

概要

OpenGLは2Dや3DのインタラクティブなグラフィックスアプリケーションをOSなどに依存せず作成できる、優れた開発環境です。OpenGLは1992年から開発がすすめられ、いまや2D、3DグラフィックスアプリケーションのAPIとしては、数多くのアプリケーションで使われ、いろんなコンピュータプラットホームで利用でき、業界標準になっています。

OpenGLは、様々な種類のレンダリング、テクスチャマッピング、特殊効果、および他の強力なビジュアライゼーション機能を取り入れており、革新的な、アプリケーション開発を加速できます。

開発者はすべてのポピュラーなデスクトップとワークステーションプラットホームに、OpenGLのパワーを利用することができますので、広いアプリケーション展開が可能になります。もっと詳しい情報は、 OpenGLのサイトで得ることができます。

GLUTはOpenGL Utility Toolkitですの略です。OpenGLを使ったプログラムを書くために、どのようなウィンドウシステムで利用できるツールキットです。 これは、簡単なウインドウをもつOpenGLを使うプログラムで使える、アプリケーションプログラミングインターフェース(API)を実装します。(訳注:GLUTを使えば、ウインドウシステム、プラットフォームの違いを吸収してくれます。) GLUTを使えば、OpenGLプログラミングを学んだり、調査すしたりすることが簡単になります。 また、いろいろなPCとワークステーション、OSにわたって動作するひとつのOpenGLプログラムに書けるのと同様に、GLUTは携帯用のAPIも提供しています。もっと詳しい情報は、 OpenGLのGLUTのサイトで得ることができます。

多くのOSにGLUTがプレインストールされています。もし、自分の環境にあったものが分からない場合は、 Googleで調べてみてください。

Windowsのバイナリは、www.xmission.comでダウンロードできます。

最初のGLUTプログラムを作ろう

GLUTを使うために、初期化処理をおこなう必要があります。これは、glutInit関数を使って行えます。 この関数はコマンドラインを解析し、メインウインドウのパラメータをセットします。しかし、それは、C/C++形式の入力を前提としています。 あなたは、自分の関数内で、ParamCountとParamStrから、C/C++風のコマンドラインパラメータに変換する必要があります。

procedure glutInitPascal(ParseCmdLine: Boolean); 
var
  Cmd: array of PChar;
  CmdCount, I: Integer;
begin
  if ParseCmdLine then
    CmdCount := ParamCount + 1
  else
    CmdCount := 1;
  SetLength(Cmd, CmdCount);
  for I := 0 to CmdCount - 1 do
    Cmd[I] := PChar(ParamStr(I));
  glutInit(@CmdCount, @Cmd);
end;

要するに、配列を作って、ParamStrからの文字列をセットしています。この関数は、glutInitに渡して、制御するためのパラメータを取ることができます。コマンドライン、もしくは、実行ファイルそのものの名です。

glutInitについての情報は: http://www.opengl.org/resources/libraries/glut/spec3/node10.html

次に、メインウインドウを生成する必要があります。 メインウインドウに、glutInitDisplayModeを使って、ディスプレイモードを設定します。 これは、フラグの組み合わせで表現されるただ1つのパラメータを取ります。 通常は、GLUT_DOUBLE or GLUT_RGB or GLUT_DEPTH で充分でしょう。

glutInitDisplayModeについての情報は: http://www.opengl.org/resources/libraries/glut/spec3/node12.html

The position and size of the window is controlled using ウインドウの位置とサイズは、 glutInitWindowPosition と、 glutInitWindowSize.によって制御されます。 これらは、2個のパラメータをとります。 最初のものはX and Y の組、後のものは、幅と高さです。ウインドウのサイズと中心を得るために、glutGetを使うこともできます。

glutInitWindowPosition, glutInitWindowSize と glutGetについての情報は: http://www.opengl.org/resources/libraries/glut/spec3/node11.html http://www.opengl.org/documentation/specs/glut/spec3/node70.html

最後に、glutCreateWindow 関数を使って、ウインドウを生成します。 これは、ウインドウを生成し、パラメータを通してキャプションを設定します。

結果として、この関数はウインドウのハンドルを返します。これは、他の関数で必要とされて使われる事があります。

glutCreateWindowについての情報は: http://www.opengl.org/resources/libraries/glut/spec3/node16.html

プログラムがメインループにはいる前に、いくつかコールバックを設定しておきます。ウインドウを描画するとき、リサイズするとき、キーボード入力があったとき、などに、コールバックを必要とします。これらのコールバックは、glutDisplayFuncglutReshapeFuncglutKeyboardFuncを使って設定します。

コールバックについての情報は: http://www.opengl.org/resources/libraries/glut/spec3/node45.html#SECTION00080000000000000000

描画関数は、このようになるでしょう。

procedure DrawGLScene; cdecl;
begin
  glClear(GL_COLOR_BUFFER_BIT or GL_DEPTH_BUFFER_BIT);
  glutSwapBuffers;
end;

これは、単にウインドウをバックグラウンド色でクリアして、Zバッファをリセットします。(Zバッファについては、後で説明するので分からなくても気にしないでください。)

リサイズ関数は、次のようになるでしょう。

procedure ReSizeGLScene(Width, Height: Integer); cdecl;
begin
  if Height = 0 then
    Height := 1;

  glViewport(0, 0, Width, Height);
  glMatrixMode(GL_PROJECTION);
  glLoadIdentity;
  gluPerspective(45, Width / Height, 0.1, 1000);

  glMatrixMode(GL_MODELVIEW);
  glLoadIdentity;
end;

このコードで、OpenGLにウインドウのどの部分に描画し、必要な値を適切な行列に設定することができます。 (行列関数は、後で説明します。)

キーボード入力は、次の関数で評価されます。

procedure GLKeyboard(Key: Byte; X, Y: Longint); cdecl;
begin
  if Key = 27 then
    Halt(0);
end;

この関数はESCキーを押すとプログラムを終了するようにします。GLUTはイベントドリブンであり、プログラムを終了するためには、コールバック関数の中でHalt関数をコールします。

もし、別の方法でウインドウをクローズすると、ウインドウは消えても、プログラムは見えないところでループを続けているでしょう。

メインループを開始するには、glutMainLoopをコールします。 これは、終了しないループに突入し、コールバック関数をコールしていきます。 プログラムの主要部分は次のようになるでしょう。

const 
  AppWidth = 640; 
  AppHeight = 480; 

procedure InitializeGL; 
begin 
  glClearColor(0.18, 0.20, 0.66, 0); 
end; 

var 
  ScreenWidth, ScreenHeight: Integer; 
begin 
  glutInitPascal(True); 
  glutInitDisplayMode(GLUT_DOUBLE or GLUT_RGB or GLUT_DEPTH); 
  glutInitWindowSize(AppWidth, AppHeight); 
  ScreenWidth := glutGet(GLUT_SCREEN_WIDTH); 
  ScreenHeight := glutGet(GLUT_SCREEN_HEIGHT); 
  glutInitWindowPosition((ScreenWidth - AppWidth) div 2,
    (ScreenHeight - AppHeight) div 2); 
  glutCreateWindow('OpenGL Tutorial 1'); 

  InitializeGL; 

  glutDisplayFunc(@DrawGLScene); 
  glutReshapeFunc(@ReSizeGLScene); 
  glutKeyboardFunc(@GLKeyboard); 

  glutMainLoop; 
end.

次のチュートリアルでは、少しコードを追加して、簡単な図形を書いてみます。

下記でソースコードやlinux/Windowsの実行ファイルをダウンロードできます。 Lazarus CCR SourceForge.

単純な形状を描画する

今回は、少しだけコードを追加して、OpenGLの関数の説明にフォーカスします。

これまでのコードで説明します。

  .
  .
  .
  glMatrixMode(GL_PROJECTION);
  glLoadIdentity;
  gluPerspective(45, Width / Height, 0.1, 1000);

  glMatrixMode(GL_MODELVIEW);
  glLoadIdentity;
end;

glMatrixMode関数で、変更したい行列を選択します。 OpenGL には、3つの行列があります。

GL_MODELVIEW: この行列は、頂点をモデル空間へ移動するためのものです。

GL_PROJECTION: この行列は、3次元の位置を2次元の最終的に表示するピクセル位置に変換するためのものです。

GL_TEXTURE: この行列はテクスチャ座標を変換するためのものです。

いったん、変更したい行列を選択したら、行列値に影響を与える関数をコールします。


glLoadIdentity は、行列をリセットするので、頂点位置に影響をあたえなくなります。 ほとんどすべての行列関数は、現在の行列に、生成した一つの行列を掛けるので、時々この関数で行列をクリアする必要があるでしょう。 (訳注:glLoadIdentityは、変換行列を単位行列にする。reset(リセット)や、clear(クリアする)、というと、プログラミング的な表現では、ゼロ行列をおもいうかべそうだが、原文作者の数学的な観念の表現であると考えて、そのまま和訳した)

視野行列を設定したいなら、 gluPerspective を使うことができます。4つのパラメータ(アスペクト比、視野の近い側の面、遠い側の面)、が視野をあらわします。これは、シンプルです。

(訳注:OpenGLの観念としては、視野は、体積としてとらえるので、視野体積として空間を捉えるとよいだろう。) それで、モデル行列を変更できます。この時点で、固有のものをセットすればよいでしょう。 よろしいでしょうか。それでは、最初の形状を書いてみましょう。

procedure DrawGLScene; cdecl;
begin
  glClear(GL_COLOR_BUFFER_BIT or GL_DEPTH_BUFFER_BIT);

  glLoadIdentity;
  glTranslatef(0, 0, -5);

  glBegin(GL_TRIANGLES);
    glColor3f(1, 0, 0);
    glVertex3f(-1, -1, 0);

    glColor3f(0, 1, 0);
    glVertex3f(1, -1, 0);

    glColor3f(0, 0, 1);
    glVertex3f(0, 1, 0);
  glEnd;

  glutSwapBuffers;
end;

すでに、glClear関数は使いましたが、これは、バッファをリセットします。 次の2個の関数はスキップして、描画関数に注目します。

glBegin marks beginning of drawing block. After this function you can start entering vertices. Parameter describes how are vertices used when drawing: GL_POINTS: Treats each vertex as a single point. Vertex n defines point n. N points are drawn.

GL_LINES: Treats each pair of vertices as an independent line segment. Vertices 2n-1 and 2n define line n. n/2 lines are drawn.

GL_LINE_STRIP: Draws a connected group of line segments from the first vertex to the last. n-1 lines are drawn.

GL_LINE_LOOP: Draws a connected group of line segments from the first vertex to the last, then back to the first. Vertices n and n+1 define line n. The last line, however, is defined by vertices n and 1. n lines are drawn.

GL_TRIANGLES: Treats each triplet of vertices as an independent triangle. Vertices 3n-2, 3n-1 and 3n define triangle n. n/3 triangles are drawn.

GL_TRIANGLE_STRIP: Draws a connected group of triangles. One triangle is defined for each vertex presented after the first two vertices. For odd n, vertices n, n+1 and n+2 define triangle n. For even n, vertices n+1, n and n+2 define triangle n. n-2 triangles are drawn.

GL_TRIANGLE_FAN: Draws a connected group of triangles. One triangle is defined for each vertex presented after the first two vertices. Vertices 1. n+1 and n+2 define triangle n. n-2 triangles are drawn.

GL_QUADS: Treats each group of four vertices as an independent quadrilateral. Vertices 4n-3, 4n-2, 4n-1 and 4n define quadrilateral n. n/4 quadrilaterals are drawn.

GL_QUAD_STRIP: Draws a connected group of quadrilaterals. One quadrilateral is defined for each pair of vertices presented after the first pair. Vertices 2n-1, 2n, 2n+2 and 2n+1 define quadrilateral n. n/2-1 quadrilaterals are drawn. Note that the order in which vertices are used to construct a quadrilateral from strip data is different from that used with independent data.

GL_POLYGON: Draws a single, convex polygon. Vertices 1 through n define this polygon.

SimpleShapePic1.jpg

You'll draw single triangle and for that GL_TRIANGLES flag will do the trick. glVertex3f function defines the position of a vertex you want to draw. There are more glVertex* functions. Only difference is number and type of parameters they take. For instance... glVertex2i takes two parameters (x and y) of integer type. glVertex3f will almost always be just what you need.

Before glVertex you can set color, material, texture... For simplicity you'll just specify color for each vertex in this tutorial. Color is set using glColor3f function. glColor can also take different set of parameters like glVertex.

As we look through code we can see that Z is set to 0 for all vertices. Since you set near plane to 0.1, triangle will not be visible. That is where those two functions we skipped in the beginning jump in. We already know that glLoadIdentity reset matrix. glTranslatef moves triangles by X, Y and Z values you provide. Since you set Z to -5 (negative Z is farther from camera) all vertices will be drawn 5 units far from point of view and will be visible.

In the end you call glEnd functions that finishes drawing. You could now start another drawing block with new glBegin function if you wish.

Download source code, linux executable or windows executable from Lazarus CCR SourceForge.

Using display lists

Sometimes you'll need to draw some object multiple times on scene. OpenGL has ability to build display lists which make drawing a bit faster. Creating display list is very easy... just draw vertices as you did in previous tutorial and enclose them with glNewList and glEndList calls.

const
  LIST_OBJECT = 1;

procedure CreateList;
begin
  glNewList(LIST_OBJECT, GL_COMPILE);
    glBegin(GL_TRIANGLE_FAN);
      glColor3f(1, 0, 0);
      glVertex3f(0, 0.5, 0);

      glColor3f(1, 1, 0);
      glVertex3f(-0.5, -0.5, 0.5);

      glColor3f(1, 1, 1);
      glVertex3f(0.5, -0.5, 0.5);

      glColor3f(0, 1, 1);
      glVertex3f(0.5, -0.5, -0.5);

      glColor3f(0, 0, 1);
      glVertex3f(-0.5, -0.5, -0.5);

      glColor3f(0, 1, 0);
      glVertex3f(-0.5, -0.5, 0.5);
    glEnd;

    glBegin(GL_QUADS);
      glColor3f(1, 1, 0);
      glVertex3f(-0.5, -0.5, 0.5);

      glColor3f(1, 1, 1);
      glVertex3f(0.5, -0.5, 0.5);

      glColor3f(0, 1, 1);
      glVertex3f(0.5, -0.5, -0.5);

      glColor3f(0, 0, 1);
      glVertex3f(-0.5, -0.5, -0.5);

      glColor3f(0, 1, 0);
      glVertex3f(-0.5, -0.5, 0.5);
    glEnd;
  glEndList;
end;

glNewList creates new display list and all drawing functions will be recorded until glEndList is called. The first parameter for glNewList function is list ID. Every list is defined by it's ID. If list with given ID is already created it fill be cleared before recording. If the second parameter is GL_COMPILE then all drawing functions are just recorded, but if it is GL_COMPILE_AND_EXECUTE then they are recorded and executed automaticly.

glIsList function can help you with display lists. It can tell if some list ID is already filled with data. Another useful function is glGenLists. It will create multiple empty display lists. You pass number of display lists you need and you get ID of the first one. If you require n lists, and get r ID, generated display lists are: r, r+1, r+2,..., r+n-1

All created lists should be deleted. You will do that before program exits:

procedure GLKeyboard(Key: Byte; X, Y: Longint); cdecl;
begin
  if Key = 27 then
  begin
    glDeleteLists(LIST_OBJECT, 1);
    Halt(0);
  end;
end;

glDeleteLists takes 2 parameters, ID of display list and number of lists to delete. If ID is r, and number of lists to delete is n, deleted lists are: r, r+1, r+2,..., r+n-1

Now you know how to create and delete display lists... let's see how to draw them:

procedure DrawGLScene; cdecl;
begin
  glClear(GL_COLOR_BUFFER_BIT or GL_DEPTH_BUFFER_BIT);

  glLoadIdentity;
  glTranslatef(-2, 0, -5);
  glRotatef(40, 1, 0, 1);
  glCallList(LIST_OBJECT);

  glLoadIdentity;
  glTranslatef(1, -2, -10);
  glRotatef(62, 0, 1, 0);
  glCallList(LIST_OBJECT);

  glLoadIdentity;
  glTranslatef(-4, 0.5, -15);
  glRotatef(200, 1, 0, 0);
  glCallList(LIST_OBJECT);

  glutSwapBuffers;
end;
DisplayListsPic1.jpg

Using glCallList you can draw only one display list. In this tutorial, before drawing display list, you change model matrix and draw object in different places.

Some times you would like to draw multiple lists at once. That is possible using glCallLists function. It takes number of lists you want to draw, type of array that contains display list IDs and array with display list IDs. Type of list can be one of the following:

GL_BYTE: list is treated as an array of signed bytes, each in the range -128 through 127.

GL_UNSIGNED_BYTE: list is treated as an array of unsigned bytes, each in the range 0 through 255.

GL_SHORT: list is treated as an array of signed two-byte integers, each in the range -32768 through 32767.

GL_UNSIGNED_SHORT: list is treated as an array of unsigned two-byte integers, each in the range 0 through 65535.

GL_INT: lists is treated as an array of signed four-byte integers.

GL_UNSIGNED_INT: list is treated as an array of unsigned four-byte integers.

GL_FLOAT: list is treated as an array of four-byte floating-point values.

GL_2_BYTES: list is treated as an array of unsigned bytes. Each pair of bytes specifies a single display list ID. The value of the pair is computed as 256 times the unsigned value of the first byte plus the unsigned value of the second byte.

GL_3_BYTES: list is treated as an array of unsigned bytes. Each triplet of bytes specifies a single display list ID. The value of the triplet is computed as 65536 times the unsigned value of the first byte, plus 256 times the unsigned value of the second byte, plus the unsigned value of the third byte.

GL_4_BYTES: list is treated as an array of unsigned bytes. Each quadruplet of bytes specifies a single display list ID. The value of the quadruplet is computed as 16777216 times the unsigned value of the first byte, plus 65536 times the unsigned value of the second byte, plus 256 times the unsigned value of the third byte, plus the unsigned value of the fourth byte.

That is for now. Next tutorial will show how to create little planetary system. We'll talk about matrices and how to make animated scene that doesn't depend of number of frames per second.

Download source code, linux executable or windows executable from Lazarus CCR SourceForge.

Full screen animation

Entering full screen mode is easy with GLUT. Let's change main part of the program:

const
  FSMode = '800x600:32@75';

begin
  glutInitPascal(False);
  glutInitDisplayMode(GLUT_DOUBLE or GLUT_RGB or GLUT_DEPTH);
  glutGameModeString(FSMode);
  glutEnterGameMode;
  glutSetCursor(GLUT_CURSOR_NONE);

  InitializeGL;

  glutDisplayFunc(@DrawGLScene);
  glutReshapeFunc(@ReSizeGLScene);
  glutKeyboardFunc(@GLKeyboard);
  glutIdleFunc(@DrawGLScene);

  glutMainLoop;
end.

Since we don't want GLUT to parse command line this time we call glutInitPascal with False parameter. As you can see, there is no code for window creation. GLUT have glutEnterGameMode that create full screen window. To specify what kind of full screen mode you want, you call glutGameModeString function which takes string that defines mode you like. Format of that string is:

[width "x" height][":" bpp]["@" hertz]

In FSMode string we declared that full screen mode should be 800x600, with 32bit pallete and 75Hz refresh. It is possible to skip one of the group. If you omit size, GLUT will try to use current one or first smaller that can work. That policy is used and for other parameters.

Usually in full screen mode cursor is not visible. To hide cursor you use glutSetCursor function. It takes only one parameter which describes cursor you would like to see:

GLUT_CURSOR_RIGHT_ARROW
GLUT_CURSOR_LEFT_ARROW
GLUT_CURSOR_INFO
GLUT_CURSOR_DESTROY
GLUT_CURSOR_HELP
GLUT_CURSOR_CYCLE
GLUT_CURSOR_SPRAY
GLUT_CURSOR_WAIT
GLUT_CURSOR_TEXT
GLUT_CURSOR_CROSSHAIR
GLUT_CURSOR_UP_DOWN
GLUT_CURSOR_LEFT_RIGHT
GLUT_CURSOR_TOP_SIDE
GLUT_CURSOR_BOTTOM_SIDE
GLUT_CURSOR_LEFT_SIDE
GLUT_CURSOR_RIGHT_SIDE
GLUT_CURSOR_TOP_LEFT_CORNER
GLUT_CURSOR_TOP_RIGHT_CORNER
GLUT_CURSOR_BOTTOM_RIGHT_CORNER
GLUT_CURSOR_BOTTOM_LEFT_CORNER
GLUT_CURSOR_FULL_CROSSHAIR
GLUT_CURSOR_NONE
GLUT_CURSOR_INHERIT

glutIdleFunc defines callback function that you want to be called every time you program has no messages to process. Since we just want to render new frame if there is nothing to do, just set idle function to DrawGLScene. Some other tutorials show that idle function should send refresh message insted of drawing, but that way I have 50-100 frames less than using method I described.

Now, let's look at the program termination where you need to exit full screen mode:

procedure GLKeyboard(Key: Byte; X, Y: Longint); cdecl;
begin
  if Key = 27 then
  begin
    glutLeaveGameMode;
    Halt(0);
  end;
end;

As you can see, all you need to do is to call glutLeaveGameMode.

Now, we'll introduce some new matrix functions. First, let's change ReSizeGLScene function:

procedure ReSizeGLScene(Width, Height: Integer); cdecl;
begin
  .
  .
  .
  glMatrixMode(GL_MODELVIEW);
  glLoadIdentity;
  gluLookAt(0, 20, 25, 0, 0, 0, 0, 1, 0);
end;

gluLookAt create matrix that will define from where are you look to objects. First 3 parameters are X, Y and Z coordinate of position of camera. Next 3 parameters are X, Y and Z coordinate of point where camera look at, and last 3 parameters defines "up" vector (where is "up" for the camera). Usually, up is positive y axis.

OK, let's draw now. Since you set matrix with gluLookAt that should be used with all objects, you can't just use glLoadIdentity to reset matrix for next object... you'll save previous matrix state and restore it after object is drawn:

procedure DrawGLScene; cdecl;
var
  T: Single;
begin
  T := glutGet(GLUT_ELAPSED_TIME) / 1000;
  glClear(GL_COLOR_BUFFER_BIT or GL_DEPTH_BUFFER_BIT);

  glPushMatrix;
    glRotatef(5 * T, 0, 1, 0);
    glColor3f(1, 1, 0);
    glutWireSphere(2, 20, 20);
  glPopMatrix;

  glPushMatrix;
    glRotatef(90 * T, 0, 1, 0);
    glTranslatef(5, 0, 0);
    glRotatef(40 * T, 0, 1, 0);
    glColor3f(1, 0, 0);
    glutWireSphere(0.6, 10, 10);
  glPopMatrix;

  glPushMatrix;
    glRotatef(60 * T, 0, 1, 0);
    glTranslatef(-3, 0, 9);
    glRotatef(50 * T, 0, 1, 0);
    glColor3f(0, 1, 0);
    glutWireSphere(1, 16, 16);

    glPushMatrix;
      glRotatef(360 * T, 0, 1, 0);
      glTranslatef(-1.7, 0, 0);
      glRotatef(50 * T, 0, 1, 0);
      glColor3f(0, 0, 1);
      glutWireSphere(0.4, 10, 10);
    glPopMatrix;

  glPopMatrix;

  glutSwapBuffers;
end;
FullScreenAnimationPic1.jpg

glPushMatrix i glPopMatrix are used to save and restore matrix state. As you can see, we save matrix state, then change matrix in order to draw object in right place, and then restore old matrix state.

You may wonder what is T variable for. Well, it is used to determen animation speed. Every change that depends on time is multiplied with T. That way animation speed is constant on every frame rate. glutGet function with GLUT_ELAPSED_TIME parameter returns time in milliseconds from glutInit is called. By dividing that value with 1000, we get time in seconds.

glRotatef function create rotation matrix. First parameter is angle in degrees, and last 3 parameters defines axis around which rotation will be done. Since you multiplied angle with T, object will be rotated by that angle in exactly 1 second.

Download source code, linux executable or windows executable from Lazarus CCR SourceForge.

Light

This tutorial will introduce some light to the scene. You'll make rotating cube and one light which will add some realism to the scene, but first let's make some utility unit.

For now it will have only basic functions to help us getting current and delta (time that elapsed from one render to other render call) times and for calculating frames per second.

unit utils;

{$mode objfpc}{$H+}

interface

uses
  glut;

function GetTotalTime: Single;
function GetDeltaTime: Single;
procedure FrameRendered(Count: Integer = 1);
function GetFPS: Single;

implementation

var
  OldTime: Integer = 0;
  FPSTime: Integer = 0;
  FPSCount: Integer = 0;

function GetTotalTime: Single;
begin
  Result := glutGet(GLUT_ELAPSED_TIME) / 1000;
end;

function GetDeltaTime: Single;
var
  NewTime: Integer;
begin
  NewTime := glutGet(GLUT_ELAPSED_TIME);
  Result := (NewTime - OldTime) / 1000;
  OldTime := NewTime;
end;

procedure FrameRendered(Count: Integer);
begin
  Inc(FPSCount, Count);
end;

function GetFPS: Single;
var
  NewTime: Integer;
begin
  NewTime := glutGet(GLUT_ELAPSED_TIME);

  Result := FPSCount / ((NewTime - FPSTime) / 1000);

  FPSTime := NewTime;
  FPSCount := 0;
end;

end.

As you can see, there is nothing complicated in this unit. Time is simply saved betwen calls and difference is returned. FrameRendered should be called every time you draw scene so function can calculate FPS.

Now, let's have fun with lights.

OpenGL have several types of light... ambient, diffuse, point, spot, specular and emissive light.

Ambient light is something like Sun. When sun rays pass through the window of a room they hit the walls and are reflected and scattered into all different directions which averagely brightens up the whole room. All vertices are lit with ambient light.

Diffuse light can be represented as parallel light rays comming from far away. They will lit only vertices that are oriented towards the light source.

Point light lights all around it. It is like a fire ball, it send light rays all around it and lights vertices that are oriented towards light source and that are close enough.

Spot light is like light from flashlight. It is simply a point light source with a small light cone radius. All vertices that falls inside of cone and are close enough are lit.

Just like Diffuse light, Specular light is a directional type of light. It comes from one particular direction. The difference between the two is that specular light reflects off the surface in a sharp and uniform way. The rendering of specular light relies on the angle between the viewer and the light source. From the viewer’s standpoint specular light creates a highlighted area on the surface of the viewed object known as specular highlight or specular reflection.

Emissive light is a little different than any other previously explained light components. This light comes out of object you draw but don't lit other objects in nearby.

For simplicity we'll use only diffuse light in this tutorial. Later on, some other lights may appear in tutorials :)

Let's see how to enable light in scene:

const
  DiffuseLight: array[0..3] of GLfloat = (0.8, 0.8, 0.8, 1);

  glEnable(GL_LIGHTING);
  glLightfv(GL_LIGHT0, GL_DIFFUSE, DiffuseLight);
  glEnable(GL_LIGHT0);

As you see, we enable lighting in OpenGL so lights affect scene you are rendering. Light parameters are set with glLightfv function. It takes 3 parameters... one for light number you want to change (OpenGL suports up to 8 lights), next tells OpenGL what light parameter to change, and the last one is new parameter for light. You'll set just diffuse color for light in this tutorial. After that, you can enable light and there will be light in the scene... but... that is not all.

More about glLightfv: http://www.opengl.org//documentation/specs/man_pages/hardcopy/GL/html/gl/light.html

If you want to use lights you can't just set color for vertex... you must set material for vertices. Let's setup material for drawing:

glEnable(GL_COLOR_MATERIAL);
glColorMaterial(GL_FRONT, GL_AMBIENT_AND_DIFFUSE);
LightPic1.jpg

You expected something more complicated, do you? :) Well, this code allows us to use glColor function to set material to vertices. By using glEnable function and GL_COLOR_MATERIAL flag, you can define what material properties will glColor change. glColorMaterial(GL_FRONT, GL_AMBIENT_AND_DIFFUSE) tells OpenGL that glColor changes ambient and diffuse material. We'll discus materials more in later tutorials.

One more thing that is important when using lights... every vertex must have normal associated with it. Normal is used to find the direction of vertex so light can be calculated properly. You'll use GLUT function to draw cube and it provides normals for us, so this time we'll just walk by normals.

After all those setting ups, light will shine up your cube :)

Part of the text is copied from The OpenGL Light Bible

Download source code, linux executable or windows executable from Lazarus CCR SourceForge.

Bitmap fonts

Games and programs usually need to write some text on screen. GLUT provides several functions for drawing chars that are platform independent.

First, we'll show how to use default bitmap fonts. Almost all code additions will be made to utils.pas unit.

Since text will be drawn in 2D, we'll need to know width and height of viewport... so, we'll write two functions for that:

function glGetViewportWidth: Integer;
var
  Rect: array[0..3] of Integer;
begin
  glGetIntegerv(GL_VIEWPORT, @Rect);
  Result := Rect[2] - Rect[0];
end;

function glGetViewportHeight: Integer;
var
  Rect: array[0..3] of Integer;
begin
  glGetIntegerv(GL_VIEWPORT, @Rect);
  Result := Rect[3] - Rect[1];
end;

We just get left/right, top/bottom and calculate width/height by subtracting them.

There must be functions for entering and leaving 2D mode:

procedure glEnter2D;
begin
  glMatrixMode(GL_PROJECTION);
  glPushMatrix;
  glLoadIdentity;
  gluOrtho2D(0, glGetViewportWidth, 0, glGetViewportHeight);

  glMatrixMode(GL_MODELVIEW);
  glPushMatrix;
  glLoadIdentity;

  glDisable(GL_DEPTH_TEST);
end;

procedure glLeave2D;
begin
  glMatrixMode(GL_PROJECTION);
  glPopMatrix;
  glMatrixMode(GL_MODELVIEW);
  glPopMatrix;

  glEnable(GL_DEPTH_TEST);
end;

When entering 2D mode, we save current matrices and set 2D matrix using gluOrtho2D function. This way if we draw some thing on 100, 100 it will be drawn on exactly 100 pixels from left edge of window, and 100 pixels form bottom edge (positive Y is up). Also, we disable ZBuffer. This way text won't alter ZBuffer.

Leaving 2D mode just returns old matrices and enable ZBuffer.

Now, we can create function for text drawing:

procedure glWrite(X, Y: GLfloat; Font: Pointer; Text: String);
var
  I: Integer;
begin
  glRasterPos2f(X, Y);
  for I := 1 to Length(Text) do
    glutBitmapCharacter(Font, Integer(Text[I]));
end;

glutBitmapCharacter can draw only one character of selected font. First parameter is desired font (GLUT_BITMAP_9_BY_15, GLUT_BITMAP_8_BY_13, GLUT_BITMAP_TIMES_ROMAN_10, GLUT_BITMAP_TIMES_ROMAN_24, GLUT_BITMAP_HELVETICA_10, GLUT_BITMAP_HELVETICA_12 or GLUT_BITMAP_HELVETICA_18) and other one is character.

Character will be drawn at current raster position. To set desired raster position we call glRasterPos function. glRasterPos can handle different number and types of parameters just like glVertex function. Coordinate specified is transformed by model and projection matrix to get 2D coordinate where new raster position will be. Since we entered 2D mode, X and Y coordinates are actual 2D coordinates where drawing will occur.

This new functions will make text drawing very easy:

procedure DrawGLScene; cdecl;
begin
  glClear(GL_COLOR_BUFFER_BIT or GL_DEPTH_BUFFER_BIT);

  glLoadIdentity;
  glTranslatef(0, 0, -5);
  glRotatef(GetTotalTime * 10, 0, 0.5, 0.5);

  glColor3f(1, 0, 0);
  glutSolidCube(2);

  glEnter2D;

  glColor3f(0.2, 0.8 + 0.2 * Sin(GetTotalTime * 5), 0);
  glWrite(20, glGetViewportHeight - 20, GLUT_BITMAP_8_BY_13,
    Format('OpenGL Tutorial :: Bitmap Fonts :: FPS - %.2f FPS', [FPS]));

  glColor3f(1, 1, 1);
  glWrite(50, glGetViewportHeight - 60, GLUT_BITMAP_9_BY_15, 'GLUT_BITMAP_9_BY_15');
  glWrite(50, glGetViewportHeight - 90, GLUT_BITMAP_8_BY_13, 'GLUT_BITMAP_8_BY_13');
  glWrite(50, glGetViewportHeight - 120, GLUT_BITMAP_TIMES_ROMAN_10, 'GLUT_BITMAP_TIMES_ROMAN_10');
  glWrite(50, glGetViewportHeight - 150, GLUT_BITMAP_TIMES_ROMAN_24, 'GLUT_BITMAP_TIMES_ROMAN_24');
  glWrite(50, glGetViewportHeight - 180, GLUT_BITMAP_HELVETICA_10, 'GLUT_BITMAP_HELVETICA_10');
  glWrite(50, glGetViewportHeight - 210, GLUT_BITMAP_HELVETICA_12, 'GLUT_BITMAP_HELVETICA_12');
  glWrite(50, glGetViewportHeight - 240, GLUT_BITMAP_HELVETICA_18, 'GLUT_BITMAP_HELVETICA_18');

  glColor3f(0.5, 0.5, 1);
  glWrite(
    glGetViewportWidth - glutBitmapLength(GLUT_BITMAP_9_BY_15, LazText) - 5,
    10, GLUT_BITMAP_9_BY_15, LazText);

  glLeave2D;

  glutSwapBuffers;

  FrameRendered;
end;
BitmapFontsPic1.jpg

We draw red cube and rotate it, and some text to show how various bitmap fonts look like. glutBitmapLength function is used to find width of string so it could be aligned to right. Code can easily be altered to center text.

Note: See how cube looks without light.

Download source code, linux executable or windows executable from Lazarus CCR SourceForge.

Textures

It's time to use textures :)

This tutorial will show how to draw textured polygons and how to blend textures using multipass technic. Since OpenGL has no builtin mechanism for loading textures, we'll use external library: Vampyre Imaging Library. We'll use just OpenGL helper functions, but you may find this lib handy for some other things to.

Let's get started... we'll create display list for drawing textured rectangle:

procedure CreateList;
begin
  glNewList(LIST_OBJECT, GL_COMPILE);
    glBegin(GL_QUADS);
      glTexCoord2f(1, 0);
      glVertex3f( 2, 2, 0);
      glTexCoord2f(0, 0);
      glVertex3f(-2, 2, 0);
      glTexCoord2f(0, 1);
      glVertex3f(-2,-2, 0);
      glTexCoord2f(1, 1);
      glVertex3f( 2,-2, 0);
    glEnd;
  glEndList;
end;

Notice glTexCoord functions. They are used to specify which part of texture is assigned to vertex. Coordinates defined in this functions are from 0 to 1 (values greater than 1 are allowed but can generate different results). 0 is first pixel and 1 is last pixel. So, 0.5 will be right in the middle of texture.

Texture loading is extremely easy with Vampyre Imaging Library:

var
  Tex1, Tex2: GLuint;

procedure InitializeGL;
begin
  glClearColor(0, 0, 0, 0);
  Tex1 := LoadGLTextureFromFile('ashwood.bmp');
  Tex2 := LoadGLTextureFromFile('Flare.bmp');
  glEnable(GL_TEXTURE_2D);
end;

LoadGLTextureFromFile loads texture from file and returns it's ID. When texture is loaded it is allready setup for rendering. Last line just enables 2D textures.

To draw textured polygon you have to bind texture and setup texture coordinations (texture coordinations are set in display list in this tutorial):

  ...
  glLoadIdentity;
  glTranslatef(-5, 0, -15);
  glBindTexture(GL_TEXTURE_2D, Tex1);
  glCallList(LIST_OBJECT);
  ...

glBindTexture function is used to select texture. When you draw polygins they will have selected texture on them. It's that easy :)

So, using one texture is easy... but how to blend two textures. Basicly you draw polygon once with one texture, setup blending parameters, and draw polygon once more time with other texture. You can blend houndreds of textures this way. Let's see how code for this looks:

  ...
  glLoadIdentity;
  glTranslatef(5, 0, -15);
  glBindTexture(GL_TEXTURE_2D, Tex1);
  glCallList(LIST_OBJECT);

  glEnable(GL_BLEND);
  glBlendFunc(GL_ZERO, GL_SRC_COLOR);
  glLoadIdentity;
  glTranslatef(5, 0, -15);
  glBindTexture(GL_TEXTURE_2D, Tex2);
  glCallList(LIST_OBJECT);
  glDisable(GL_BLEND);
...

As you can see, polygon is drawn first time like we allready know. Before second drawing we enable blending by calling glEnable(GL_BLEND). Blending means that finall pixel color is calculated like this:

DrawingColor * SRCBLEND + BackgroundColor * DESTBLEND

SRCBLEND and DESTBLEND are defined using glBlendFunc function. In this tutorial we set SRCBLEND to GL_ZERO (zero) and DESTBLENT to GL_SRC_COLOR (DrawingColor) and finall color is then:

DrawingColor * 0 + BackgroundColor * DrawingColor
TexturesPic1.jpg

This means that background will get darker when you draw with dark colors... when you draw with white color, background color will not be changed. The result will look like this

Next time, we'll use extensions to show how to use singlepass multitexturing.

Download source code, linux executable or windows executable from Lazarus CCR SourceForge.

Multitexturing (extensions)

When youknow multipass multi texturing, singlepass is very easy. Texturing is separated in stages. First stage setup and draw first texture, second stage draws another one and so on. All you have to do is to setup texture stages and to render object.

Let's see how code looks like:

procedure InitializeGL;
begin
  Load_GL_ARB_multitexture;
  glClearColor(0, 0, 0, 0);
  Tex1 := LoadGLTextureFromFile('Lazarus.bmp');
  Tex2 := LoadGLTextureFromFile('Mask.bmp');
  glActiveTextureARB(GL_TEXTURE0_ARB);
  glEnable(GL_TEXTURE_2D);
  glBindTexture(GL_TEXTURE_2D, Tex1);
  glActiveTextureARB(GL_TEXTURE1_ARB);
  glEnable(GL_TEXTURE_2D);
  glBindTexture(GL_TEXTURE_2D, Tex2);
end;

First we need load OpenGL extension that will allow us to use multitexture functions. Load_GL_ARB_multitexture will try to load those extensions and will return TRUE if operation was successful.

To select texture stage you want to work on, use glActiveTextureARB function. It takes only one parameter that define which stage you want. After that all texture functions (enabling, disabling, binding, creating...) will affect that stage.

Since we setup every thing in initialization function, all we have to do is to draw object:

procedure DrawGLScene; cdecl;
begin
  glClear(GL_COLOR_BUFFER_BIT or GL_DEPTH_BUFFER_BIT);

  glLoadIdentity;
  glTranslatef(0, 0, -5);

  glBegin(GL_QUADS);
    glMultiTexCoord2fARB(GL_TEXTURE0_ARB, 1, 0);
    glMultiTexCoord2fARB(GL_TEXTURE1_ARB, 1, 0);
    glVertex3f(2.516, 2, 0);
    glMultiTexCoord2fARB(GL_TEXTURE0_ARB, 0, 0);
    glMultiTexCoord2fARB(GL_TEXTURE1_ARB, 0, 0);
    glVertex3f(-2.516, 2, 0);
    glMultiTexCoord2fARB(GL_TEXTURE0_ARB, 0, 1);
    glMultiTexCoord2fARB(GL_TEXTURE1_ARB, 0, 1);
    glVertex3f(-2.516,-2, 0);
    glMultiTexCoord2fARB(GL_TEXTURE0_ARB, 1, 1);
    glMultiTexCoord2fARB(GL_TEXTURE1_ARB, 1, 1);
    glVertex3f(2.516,-2, 0);
  glEnd;

  glutSwapBuffers;
end;
MultitexturePic1.jpg

As you can see, difference is only in defining texture coordinations. We now use glMultiTexCoord2fARB function that takes texture stage and texture coordinations. Every thing else is unchanged.

Today almost all graphic cards supports at least 2 texture stages. Using singlepass multitexturing is faster than multipass version since you draw objects only once. If hardware supports singlepass multitexturing (Load_GL_ARB_multitexture returns TRUE) use it.

Download source code, linux executable or windows executable from Lazarus CCR SourceForge.

Render to texture

This one will be short. OpenGL can capture current scene to texture so you can use it for texturing other objects (TV screen, mirror or some thing else). Well just render scene to texture and apply it to rotating plane.

First, we must create empty texture which well use to capture scene:

procedure SetupRenderTexture;
var
  Data: Pointer;
begin
  GetMem(Data, 256*256*3);
  glGenTextures(1, @RenderTexture);
  glBindTexture(GL_TEXTURE_2D, RenderTexture);
  glTexImage2D(GL_TEXTURE_2D, 0, 3, 256, 256, 0, GL_RGB, GL_UNSIGNED_BYTE, Data);
  glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
  glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
  FreeMem(Data);
end;

Buffer for 256*256 RGB image is created and it is used to setup 2D texture.

Main part is in drawing function:

procedure DrawGLScene; cdecl;
var
  TotalTime: Single;
begin
  glClearColor(0, 0, 0, 0);
  glClear(GL_COLOR_BUFFER_BIT or GL_DEPTH_BUFFER_BIT);
  glEnable(GL_LIGHTING);
  glDisable(GL_TEXTURE_2D);
  glViewport(0, 0, 256, 256);

  TotalTime := GetTotalTime;

  glLoadIdentity;
  glTranslatef(0, 0, -5);
  glRotatef(50 * TotalTime, 1, 0, 0);
  glRotatef(100 * TotalTime, 0, 1, 0);
  glRotatef(50 * TotalTime, 0, 0, 1);

  glColor3f(1, 1, 1);
  glutSolidCube(2);

  glCopyTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, 0, 0, 256, 256, 0);

  glClearColor(0.18, 0.20, 0.66, 0);
  glClear(GL_COLOR_BUFFER_BIT or GL_DEPTH_BUFFER_BIT);
  glDisable(GL_LIGHTING);
  glEnable(GL_TEXTURE_2D);
  glViewport(0, 0, AppWidth, AppHeight);

  glLoadIdentity;
  glTranslatef(0, 0, -7);
  glRotatef(20 * TotalTime, 1, 0, 0);
  glRotatef(50 * TotalTime, 0, 1, 0);

  glBegin(GL_QUADS);
    glTexCoord2f(1, 0);
    glVertex3f(2, 2, 0);
    glTexCoord2f(0, 0);
    glVertex3f(-2, 2, 0);
    glTexCoord2f(0, 1);
    glVertex3f(-2,-2, 0);
    glTexCoord2f(1, 1);
    glVertex3f(2,-2, 0);
  glEnd;

  glutSwapBuffers;
end;
RenderToTexturePic1.jpg

First, everything is setup for scene that will be captured. Viewport is reduced to 256*256 so it will fit into texture and scene is drawn. glCopyTexImage2D is used to capture scene to currently selected texture.

When we have scene captured to texture, everything can be cleared again, viewport can be returned to original size and final scene is drawn using previous scene as texture.

P.S. Captured texture can be saved using SaveGLTextureToFile function from Vampyre Imaging Library.

Download source code, linux executable or windows executable from Lazarus CCR SourceForge.

Vertex array

OpenGL is capable of rendering primitives using data that is stored in buffers insted of calling glVertex. Buffers can be used to define vertex and texture coordinates, and colors (index and RGBA), normals and edge flags.

In this tutorial well use only vertex and color buffers, and we'll show non-indexed and indexed drawing. Non-indexed mode draws buffers as streams. Indexed mode will draw buffer elements in order that is defined in index buffer. But enough talking... let's start coding.

First, let's define some types and constants:

type
  TVertex3f = record
    X, Y, Z: Single;
  end;

  TColor3f = record
   R, G, B: Single;
  end;

  VertexBuffer: array [0..5] of TVertex3f = (
    (X : 1; Y : 1; Z : 0),
    (X : -1; Y : 1; Z : 0),
    (X : -1; Y : -1; Z : 0),
    (X : 1; Y : 1; Z : 0),
    (X : -1; Y : -1; Z : 0),
    (X : 1; Y : -1; Z : 0)
  );
  ColorBuffer: array [0..5] of TColor3f = (
    (R : 1; G : 0; B : 1),
    (R : 0; G : 0; B : 1),
    (R : 0; G : 1; B : 0),
    (R : 1; G : 0; B : 1),
    (R : 0; G : 1; B : 0),
    (R : 1; G : 1; B : 0)
  );

We have two buffers. One for vertex coordinates and one for vertex colors. This 6 vertices defines 2 triangles that forms rectangle.

Drawing primitives using buffers is easy:

  glEnableClientState(GL_VERTEX_ARRAY);
  glEnableClientState(GL_COLOR_ARRAY);
  glVertexPointer(3, GL_FLOAT, 0, @VertexBuffer[0]);
  glColorPointer(3, GL_FLOAT, 0, @ColorBuffer[0]);

  glDrawArrays(GL_TRIANGLES, 0, Length(VertexBuffer));

  glDisableClientState(GL_VERTEX_ARRAY);
  glDisableClientState(GL_COLOR_ARRAY);

First we enable buffers we want to use using glEnableClientState function. Than we can select buffers we want to use. Every buffer type has own function for selecting (glColorPointer, glEdgeFlagPointer, glIndexPointer, glNormalPointer, glTexCoordPointer, glVertexPointer). First parameter in those functions defines how many numbers every element contains. For example, let's take vertex buffer. If this parameter is 2 than OpenGL expects that every element in buffer contains x and y coordinate. If this parameter is, for example, 4, than every element should contains x, y, z and w coordinate. Next parameter defines what type of data element contains (GL_BYTE, GL_UNSIGNED_BYTE, GL_SHORT, GL_UNSIGNED_SHORT, GL_INT, GL_UNSIGNED_INT, GL_FLOAT or GL_DOUBLE). Next one defines how many bytes are between each element. This way you can have buffer that contains vertex coordinates and some custom data. For arbitrary data type, this parameter can be calculated like this:

type
  TBufferData = record
    DataBefore: TDataBefore;
    Vertex: TVertex;
    DataAfter: TDataAfter;
  end;

Bytes between elements = SizeOf(TDataBefore) + SizeOf(TDataAfter)

Last parameter if pointer to the begginig of buffer.

When buffers are selected we can draw them using glDrawArrays functions. All enabled buffers are used to draw primitives. What kind of polygons are being generated is defined in first parameter (same as in glBegin function). Next two defines subset of buffer which is used for drawing (start and count).

When buffers are not needed you can disable them.

To demonstrate indexed mode, I made some simple mesh class that can load vertex, color and index data from external files:

type
  TMesh = class
  private
    FVertices: array of TVertex3f;
    FColors: array of TColor3f;
    FIndices: array of Integer;
    procedure FreeBuffers;
  public
    constructor Create;
    destructor Destroy; override;
    procedure LoadMesh(FileName: String);
    procedure DrawMesh;
  end;

FVertices will contain data about vertices, FColors data about color and FIndices data about indices when external file is loaded.

First we'll write some code that deals with creation and destruction of class:

procedure TMesh.FreeBuffers;
begin
  FVertices := nil;
  FColors := nil;
  FIndices := nil;
end;

constructor TMesh.Create;
begin
  FreeBuffers;
end;

destructor TMesh.Destroy;
begin
  FreeBuffers;
  inherited Destroy;
end;

File that will contain mesh data is simple text file. First row will contain number of vertices and indices separated by space character. After that row will come rows for every vertex and color. X, Y, Z, R, G and B all separated by space character. In the end, there will be rows for indices... every index number is written in its own row... so, for one triangle, data file will look like this:

3 3
-1 -1 0 1 1 1
1 -1 0 1 1 1
0 1 0 1 1 1
0
1
2

This means that there is 3 vertices and 3 indices defined in file. First vrtex is at -1, -1, 0 and has color 1, 1, 1 and so on. Indices defines that order in which vertices are drawn (in this case vertices are drawn in the same order as they are defined).

Code for loading this data will loke like this:

procedure TMesh.LoadMesh(FileName: String);
var
  MeshFile: TextFile;
  VertexCount, IndexCount: Integer;
  iV, iI: Integer;
begin
  FreeBuffers;

  AssignFile(MeshFile, FileName);
  Reset(MeshFile);

  ReadLn(MeshFile, VertexCount, IndexCount);

  SetLength(FVertices, VertexCount);
  SetLength(FColors, VertexCount);
  SetLength(FIndices, IndexCount);

  for iV := 0 to VertexCount - 1 do
    ReadLn(MeshFile,
      FVertices[iV].X, FVertices[iV].Y, FVertices[iV].Z,
      FColors[iV].R, FColors[iV].G, FColors[iV].B);

  for iI := 0 to IndexCount - 1 do
    ReadLn(MeshFile, FIndices[iI]);

  CloseFile(MeshFile);
end;

After loading data, we have everything for drawing:

procedure TMesh.DrawMesh;
begin
  glEnableClientState(GL_VERTEX_ARRAY);
  glEnableClientState(GL_COLOR_ARRAY);
  glVertexPointer(3, GL_FLOAT, 0, @FVertices[0]);
  glColorPointer(3, GL_FLOAT, 0, @FColors[0]);

  glDrawElements(GL_TRIANGLES, Length(FIndices), GL_UNSIGNED_INT, @FIndices[0]);

  glDisableClientState(GL_VERTEX_ARRAY);
  glDisableClientState(GL_COLOR_ARRAY);
end;

As you can see, allmost everything is the same as for non-indexed drawing, except function that actually draw polygons. In this case we use glDrawElements function. For this one we specify what kind of polygons we want, how many indices are in index buffer, type of data in index buffer and pointer to the beginning of index buffer.

VertexArrayPic1.jpg

Full source code comes with mesh data file that this class can use to generates rectangle that is identical with one that is drawn using non-indexed mode. Mesh data file looks like this:

4 6
1 1 0 1 0 1
-1 1 0 0 0 1
-1 -1 0 0 1 0
1 -1 0 1 1 0
0
1
2
0
2
3

As you can see, there is data for only 4 vertices and 6 indices. So, first triangle is defined by vertices 0, 1 and 2, and the seccond one by vertices 0, 2 and 3. By using indexed mode we don't have to duplicate vertices.

Download source code, linux executable or windows executable from Lazarus CCR SourceForge.