Difference between revisions of "Ultibo Quick Start"
Pdbreneman (talk | contribs) m (→Overview) |
Pdbreneman (talk | contribs) m (→Overview) |
||
| Line 1: | Line 1: | ||
== Overview == | == Overview == | ||
| − | + | Our goal is to use a Raspberry Pi Zero Wireless With Headers (with [https://ultibo.org/wiki/Unit_RPISENSEHAT Sense HAT] documented more [https://www.raspberrypi.org/products/sense-hat/ here], [https://astro-pi.org/wp-content/uploads/2018/09/T05.2_Meet-the-Sense-HAT.pdf here]. and [http://www.esa.int/Education/AstroPI/European_Astro_Pi_Challenge_2019-20_now_open here]).<br/> | |
<br/> | <br/> | ||
- Use a PC to install [https://www.matthuisman.nz/2017/02/how-to-install-pinn-lite.html PINN Lite] onto a 8 GB SD card. | - Use a PC to install [https://www.matthuisman.nz/2017/02/how-to-install-pinn-lite.html PINN Lite] onto a 8 GB SD card. | ||
- Set up Zero hardware (similar to [https://www.raspberrypi.org/learning/parents-guide/ this], but a little different as need USB hub and several micro to standard cables). '''PINN works with wireless keyboards and mice (unlike NOOBS)!'''<br/> | - Set up Zero hardware (similar to [https://www.raspberrypi.org/learning/parents-guide/ this], but a little different as need USB hub and several micro to standard cables). '''PINN works with wireless keyboards and mice (unlike NOOBS)!'''<br/> | ||
- Note: the rest takes about 50 minutes on a RPi3B<br/> | - Note: the rest takes about 50 minutes on a RPi3B<br/> | ||
| − | |||
| − | |||
| − | |||
- Power up your Raspberry Pi, configure Internet access (if using WiFi)<br/> | - Power up your Raspberry Pi, configure Internet access (if using WiFi)<br/> | ||
- Select your Language near the bottom of the screen<br/> | - Select your Language near the bottom of the screen<br/> | ||
Revision as of 04:26, 21 September 2019
Overview
Our goal is to use a Raspberry Pi Zero Wireless With Headers (with Sense HAT documented more here, here. and here).
- Use a PC to install PINN Lite onto a 8 GB SD card.
- Set up Zero hardware (similar to this, but a little different as need USB hub and several micro to standard cables). PINN works with wireless keyboards and mice (unlike NOOBS)!
- Note: the rest takes about 50 minutes on a RPi3B
- Power up your Raspberry Pi, configure Internet access (if using WiFi)
- Select your Language near the bottom of the screen
- Make sure both LibreELEC and Raspbian Lite are selected to install, then click the Install button.
- When reboots, select Raspbian to boot, and delay login as Raspbian does updates automatically by itself, login (user pi and password raspberry)
- We are basically following the "headless" set up here.
- Enter the following lines (without bold comment text)
sudo sh -c "apt update && apt dist-upgrade && apt autoremove"
sudo raspi-config (to select timezone under Locale)
sudo reboot
(login)
sudo apt install libgtk2.0-dev libghc-x11-dev binutils-arm-none-eabi (temp to install 170 packages until script is fixed so don't need these)
wget https://github.com/ultibohub/Tools/releases/latest/download/ultiboinstaller.sh
chmod u+rx ultiboinstaller.sh
./ultiboinstaller.sh (confirm don't want Lazarus, do want to build the Hello World examples)
sudo poweroff (wait for LED off before remove power)
See also
- Ultibo_core
- EasyUltibo - where this wiki page started, more standard FPC & Python for SenseHat
