Difference between revisions of "Windows CE Interface"

From Lazarus wiki
Jump to navigationJump to search
Line 193: Line 193:
 
When it opens, select "Mobile Device Settings" and change the "Allow connections to one of the following" from "Bluetooth" to "DMA"
 
When it opens, select "Mobile Device Settings" and change the "Allow connections to one of the following" from "Bluetooth" to "DMA"
  
[[mobile_center_dma.gif]]
+
[[File:mobile_center_dma.gif]]
  
 
Now it should connect after closing the dialog.
 
Now it should connect after closing the dialog.

Revision as of 13:02, 15 March 2013

WinCE Logo.png

This article applies to Windows CE only.

See also: Multiplatform Programming Guide

English (en) français (fr) 한국어 (ko) português (pt) 中文(台灣)‎ (zh_TW)

Introduction

The Windows CE Interface was started by Felipe Monteiro de Carvalho and latter extended by Roozbeh and other contributors. The interface was started on 2006 with a still under development Windows CE FPC compiler. A stable compiler was released on 2007, which made it possible to release a WinCE add-on installer together with the 0.9.24 Lazarus release.

Because of the bad experience with code sharing between similar interfaces in the past with the gtk/gtk2 interface, it was decided to start a clean code for WinCE. Because the APIs are very similar, a lot of the code on the WinCE interface is copyed from the Win32/64 Interface.

Other Interfaces

Platform specific Tips

Interface Development Articles

Setting Up the Windows CE interface

To set up the Windows CE interface you will need to either use the add-on installer or set up the interface manually. Both options are detailed below. Using the add-on installer is, of course, much easier.

Using the stable add-on installer (Recommended Method)

With the first stable release of Free Pascal for Windows CE the installation of a WinCE development environment was never easier. The step-by-step guide below is all you need to install and configure Lazarus to compile wince applications.

Step-by-step guide:

  • Download and install the add-on installer (cross-arm-wince) for the same Lazarus version you just downloaded. It's on the same Source Forge Download page.
  • You can now compile arm-wince application from within Lazarus by changing in the compiler options:
    • Projects -> Compiler Options... -> Paths -> LCL Widget Type: wince
    • Projects -> Compiler Options... -> Code -> Target OS: wince
    • Projects -> Compiler Options... -> Code -> Target CPU Family: arm
  • To reduce build filesize, in the Projects -> Compiler Options... -> Debugging section, check Strip symbols and uncheck all the rest.

Using the snapshot add-on installer

Instead of using the stable release, it's also possible to use the latest development version of the Windows CE interface through the daily snapshot. It's untested, but may be helpful if you need fixes which were added after the latest stable release and consider building everything yourself too hard or too much work.

Step-by-step guide:

  • Install the latest Lazarus snapshot on Windows normally from here. Make sure you choose a Win32 snapshot with the exact same FPC version as the WinCE snapshot: http://www.hu.freepascal.org/lazarus/
  • Download and install the add-on installer for the same Free Pascal version you just downloaded. It's on the same page.
  • The rest of the steps is similar to the step-by-step guide on using the stable add-on installer

Setting up the Windows CE interface manually

To see which FPC version can be used with each Lazarus version please check LCL_Internals#Minimum_Toolkit_versions.

Here are instruction to set up the Windows CE interface manually:

Step 1 - To start with you will need to recompile the compiler on Windows to create a Windows CE - ARM Crosscompiler. There are instructions here: WinCE port.

  • Then create a batch script like this one to build your compiler starting from your installed FPC 2.2.4 (either from Lazarus or from separate install):
cd compiler
PATH=C:\Programas\lazarus220\fpc\2.2.4\bin\i386-win32
make cycle CPU_TARGET=arm OS_TARGET=wince
cd ..
pause

Step 2 - You also need to compile FCL (Free Component Library) with the newly built compile. Instructions here.

  • This clever batch script makes this easier (don't forget to fix the paths to your machine). OPT="-FU... will put all compiled units on the same place, which is very convenient, (but can cause problems. It is better to use a make clean all install instead):
cd packages
PATH=C:\Programas\lazarus220\fpc\2.2.5\bin\i386-win32
make clean all CPU_TARGET=arm OS_TARGET=wince PP=ppcrossarm.exe OPT="-FUC:\Programas\lazarus220\fpc\2.2.5\units\arm-wince"
cd ..
pause

Step 3 - Put the batch file bellow on the root of your subversion Lazarus directory and run it

PATH=C:\Programas\lazarus22\fpc\2.2.5\bin\i386-win32;c:\Programas\arm
make lcl LCL_PLATFORM=wince PP=ppcrossarm.exe CPU_TARGET=arm OS_TARGET=wince
pause

This should compile LCL for Windows CE.

Step 4 - Cross-compile the LazarusPackageIntf so you can use 3rd party visual components. Go to lazarus\packager\registration and do:

PATH=C:\Programas\lazarus22\fpc\2.2.5\bin\i386-win32;c:\Programas\arm
make PP=ppcrossarm.exe CPU_TARGET=arm OS_TARGET=wince
pause

NOTE: you need to specify $(LazarusDir)\packager\units\$(TargetCPU)-$(TargetOS)\ into your project's unit path (adding FCL as requirement should do that).

Step 5 - Now you can use Lazarus IDE to design,compile and debug your applications.

  • You can also use scripts similar to this for compiling your applications:
PATH=C:\Programas\lazarus22\fpc\2.2.5\bin\i386-win32;c:\Programas\arm
ppcrossarm.exe -Twince -FuC:\Programas\fpc\rtl\units\arm-wince -FDC:\Programas\arm -XParm-wince- test.pas
ppcrossarm.exe -Twince -FuC:\programas\lazarus\lcl\units\arm-wince -FuC:\programas\lazarus\lcl\units\arm-wince\wince -FuC:\Programas\fpc\rtl\units\arm-wince -FDC:\Programas\arm -XParm-wince- windowtest.pas
pause

Compiling Windows CE project files with Lazarus IDE

NOTE: recently a "wincemenures.or" file is reported missing on linking. You just need to copy this file from "lazarus/lcl/interfaces/wince" to "lazarus/lcl/units/arm-wince" and everything will be fine.

Everything is just as you do with other interfaces and OSes. Make sure you have selected wince as widgetset in in Compiler Options->Paths and in Code tab page select WinCE as target os and arm as Target CPU.

If you compiled your own compiler or installed it without using the Lazarus add-on installer, you also need to change compiler path in Environment options to point to your ppcrossarm.exe compiler. In other cases the compiler should already be set to the correct one, which is fpc.exe, which is a front end which chooses the correct back end compiler for the target CPU. In this case the path will be similar to C:\lazarus\fpc\2.2.2\bin\i386-win32\fpc.exe varying with the version of your installed FPC.

Now IDE is ready to compiler your files.

Debugging Windows CE software on the Lazarus IDE

You can also debug applications created within Lazarus IDE.

Step 1 - In Lazarus IDE go to the menu Environment->Debugger Options. Change the debugger path to the directory with gdb for wince.you can get it from here ftp://ftp.freepascal.org/pub/fpc/contrib/cross/gdb-6.4-win32-arm-wince.zip

And you also need to have ActiveSync installed for gdb to work. You can get ActiveSync here: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx


Step 2 - If you are using Microsoft Device Emulator Preview, launch(or restore)it.Make sure you've started emulator with 128MB of RAM.Select a path for shared folders in emulator, add copy command to your .bat file used for building your application to copy the compiled exe file to your shared path.(as you can see in my .bat file).Here is a .bat file you can use to launch emulator with 128 of ram.

start deviceemulator.exe ".\ppc_2003_se\PPC_2003_SE_WWE_ARMv4.bin" /memsize 128 /skin 
".\ppc_2003_se\PocketPC_2003_Skin.xml"

After that just do 'save and exit' whenever you want to quit emulator,and launch it again from shortcuts created in your start menu.(the shortcuts with '(restore)').

Step 3 - Run Device Emulator Manager and in available emulators right click on the name of emulator and do cradle.Now Microsoft ActiveSync will be launched.If not in Micrososft ActiveSync Go to the menu File->Get connected.If still ActiveSync doesn't recognize the emulator.Uncradle and Cradle the emulator again.

Step 4 - Copy that file with File Explorer program in your emulator to \gdb directory.If it is your first time running emulator you have to create a gdb directory in 'My Pocket PC' folder which is your root(\) folder.(To make things even faster for your each build,with file explorer go to your shared folder,press ctrl+c in your exe file,go to \gdb folder and each time before you try to debug your application just press ctrl+v)

Step 5 - Now you can safely debug your application.gdb for wince will be launched.it will copy arm-wince-pe-stub.exe to \gdb folder and check if your application.exe file is there and will launch the program. If you encountered an error make sure the \gdb folder is created,arm-wince-pe-stub.exe and you exe file is there.Also most of the times because of big size of exe file you can not copy that into your \gdb file.So you have to call Microsoft Device Emulator Preview with 128mg of ram instead of default 64mg ram.

Some Hints

1. Programs remain in memory still after exiting from them. So you can't overwrite the .exe file. You have to use tools like Process Viewer from Microsoft which remotely shows all processes and allow you to kill them. Or use process killers inside the emulator. Process Explorer is another good option. One can get it from http://madebits.com

2. Each time you are done with debugging your program don't exit from program.Do program Reset and then Debugger reset. Note that sometimes still program remain in memory,so you also have to kill the process too.

3. You can change the remote directory from /gdb to yours by add gdb parameter --eval-command="set remotedirectory ...

--eval-command="set remotedirectory \Storage Card\Program Files\My Program\bin"

4. You can reduce the size of exe file by check "Use external gdb file debug symbols file -Xg", and "Strip Symbols -Xs", the file myapp.gdb generated and stay at your computer to use it with the gdb.

Installing and Using the Pocket PC Emulator

Windows Mobile 5.0 Emulator

1 - You can download a Pocket PC Emulator from Microsoft here. First, download and install the file V1Emulator.zip.

2 - Next, be careful that there is a wrong information on the website. It will say that you need to install the Virtual Machine Network Driver, but the link provided on the website is broken. Instead, download Virtual PC 2007 here. This will install the necessary driver too.

3 - Now, go back to the first website and download and install the efp.msi file

Now you should have a fully functional PocketPC Emulator which can be utilized together with Lazarus to develop applications.

To run a Lazarus application on the emulator you can either use GDB via ActiveSync, or you can also just execute it directly.

Windows Mobile 6.5 in Windows Vista or superior

1 - Download and install the Microsoft Device Emulator 3.0

2 - Download and install the Windows Mobile 6.5 Developer Tool Kit (with localized Images)

3 - There is no more ActiveSync in Vista or superior, now it is called "Windows Mobile Device Center. So download and install it (this download requires the Genuine windows check): http://www.microsoft.com/en-us/download/details.aspx?id=14

For information about cradling and connecting to a network, read: [1]

Connecting the Windows Mobile 6.5 emulator in Vista or Superior to the computer

To connect the emulator to the computer, follow these steps:

1 - Start the Emulator

2 - Start the Device Emulator Manager. Previously it had a nice start menu icon, but in Vista+ it is well hidden. You have to run the file dvcemumanager.exe which is probably located in C:\Program Files\Microsoft Device Emulator\1.0

device manager.gif

3 - You will see the devices GUID > Right click it and select "Cradle".

cradle.gif

4 - Run the "Windows Mobile Device Center". It should have a start menu icon by now. When it opens, select "Mobile Device Settings" and change the "Allow connections to one of the following" from "Bluetooth" to "DMA"

mobile center dma.gif

Now it should connect after closing the dialog.

Links to Emulators and Images

Emulators

Microsoft Device Emulator 2.0

Microsoft Device Emulator 3.0

Images

Windows Mobile 6.0 Localized Emulator Images

Windows Mobile 6.1 Emulator Images (USA only)

Windows Mobile 6.1.4 Emulator Images (USA only)

Windows Mobile 6.5 Developer Tool Kit (with localized Images)

Running an application on the emulator

1 - Go the the Windows Programs Menu --> "Windows Mobile Emulator Images" --> "PocketPC"

2 - If you never configured your shared folder for the emulator, do so now, by clicking on the menu File --> Configure once the emulator opens. Set it to a folder where you can access your Windows CE executable created with Lazarus.

3 - On the emulator click: Start --> Programs. Now select "File Explorer". Now select "Storage Card". Navigate until you find your executable and double click it to execute it.

How to add a new control

For example TButton.

TButton is defined in lcl/buttons.pp. This is the platform independent part of the LCL, which is used by the normal LCL programmer.

Its widgetset class is in lcl/widgetset/wsbuttons.pp. This is the platform independent base for all widgetsets (qt, carbon, gtk, win32, ...).

It's wince interface class is in lcl/interfaces/wince/wincewsbuttons.pp:

 TWinCEWSButton = class(TWSButton)
 private
 protected
 public
   class function  CreateHandle(const AWinControl: TWinControl; const AParams: TCreateParams): TLCLIntfHandle; override;
 end;

Every WS class, that actually implements something must be registered. See the initialization section at the end of the wincewsXXX.pp unit:

 RegisterWSComponent(TButton, TWinCEWSButton);


Also notice that DestroyHandle should be implemented to clean up memory utilized by the control.

Gallery

Bellow are screenshots of applications created with Lazarus for Windows CE:


Virtual Moon Atlas - A free software for Moon observation or survay ( http://ap-i.net/avl/en/start ):

Vmap1 west east.jpg


LazCalendar - A simple calendar application:

Calendar Wince App.png


germesorders - A simple database application using sqlite and RxLib

germes2.png


ZzOo, pronounced /'zi:zu:/, is a free Western Zodiac sign finder. You can install it directly and free of charge on your mobile phone by visiting the GetJar app store.

zzoo-wince.png


Mini SQLite Viewer - Simple SQlite viewer/manager for WinCE and Win32

MiniSQLiteViewerApp.png


STAR Manager - advanced system manager that allows to adjust backligth and sound volume of ARM processor-based WinCE device, set desktop wallpapers, controll and manage system pocesses and memory load, contol battery charge and see device configuration.

Progr-starmgr-1.jpg


Wireless Orders for Mini Bar Cafe

Win32 TCP/IP Application Server, Win32 TCP/IP Client, WinCE TCP/IP Client. Using Lazarus and lNet we develop wireless ordering system for Mini Bar - Cafe. Print receipts directly to Cash Mashine.

More Info ( http://www.cforce.gr/orders.htm ) Demo ( http://www.cforce.gr/downloads/setupwodemo.exe )

order.jpg Example.jpg table.jpg mtrl.jpg

See Also