Difference between revisions of "Ultibo Quick Start"
Pdbreneman (talk | contribs) m |
Pdbreneman (talk | contribs) m |
||
| Line 1: | Line 1: | ||
| − | Our goal is to use a Raspberry Pi Zero Wireless With Headers | + | Our goal is to use a Raspberry Pi (optional - Zero Wireless With Headers with [https://ultibo.org/wiki/Unit_RPISENSEHAT Sense HAT] documented more [https://www.raspberrypi.org/products/sense-hat/ here], [https://astro-pi.org/wp-content/uploads/2018/09/T05.2_Meet-the-Sense-HAT.pdf here], and [http://www.esa.int/Education/AstroPI/European_Astro_Pi_Challenge_2019-20_now_open here]).<br/> |
<br/> | <br/> | ||
- Use a PC to install [https://www.matthuisman.nz/2017/02/how-to-install-pinn-lite.html PINN Lite] onto a 8 GB SD card. | - Use a PC to install [https://www.matthuisman.nz/2017/02/how-to-install-pinn-lite.html PINN Lite] onto a 8 GB SD card. | ||
| − | - Set up | + | - Set up hardware (similar to [https://www.raspberrypi.org/learning/parents-guide/ this], but the Zero is a little different as need USB hub and several micro to standard cables). '''PINN works with wireless keyboards and mice (unlike NOOBS)!'''<br/> |
- Power up your Raspberry Pi, configure Internet access (if using WiFi)<br/> | - Power up your Raspberry Pi, configure Internet access (if using WiFi)<br/> | ||
- Select your Language near the bottom of the screen<br/> | - Select your Language near the bottom of the screen<br/> | ||
Revision as of 23:55, 27 September 2019
Our goal is to use a Raspberry Pi (optional - Zero Wireless With Headers with Sense HAT documented more here, here, and here).
- Use a PC to install PINN Lite onto a 8 GB SD card.
- Set up hardware (similar to this, but the Zero is a little different as need USB hub and several micro to standard cables). PINN works with wireless keyboards and mice (unlike NOOBS)!
- Power up your Raspberry Pi, configure Internet access (if using WiFi)
- Select your Language near the bottom of the screen
- Make sure Raspbian Lite is selected to install, then click the Install button.
- When reboots, delay login as Raspbian does updates automatically by itself, login (user pi and password raspberry)
- We are basically following the "headless" set up here.
- Enter the following lines (without bold comment text)
sudo sh -c "apt update && apt dist-upgrade && apt autoremove"
sudo raspi-config (to select timezone under Locale)
sudo reboot
(login)
The reason binutils-arm-none-eabi is needed when running natively: arm_none_eabi
sudo apt install binutils-arm-none-eabi
wget https://github.com/ultibohub/Tools/releases/latest/download/ultiboinstaller.sh
chmod u+rx ultiboinstaller.sh
Note: the script below takes about 30 minutes on a RPi3B
./ultiboinstaller.sh (confirm don't want Lazarus, do want to build the Hello World examples)
Completes on RPi3B. On Zero get: Fatal I/O error: Disk Full (may work on present script)
sudo poweroff (wait for LED off before remove power)
See also
- Ultibo_core
- EasyUltibo - where this wiki page started, more standard FPC & Python for SenseHat
