Cross compiling OSX on Linux

From Lazarus wiki
Jump to: navigation, search

Cross compiling for Mac OS X on Linux


What you'll need:

  • an Intel Mac running Leopard, Snow Leopard, or Lion
  • Xcode installed on your Mac or the original or retail Mac OS X DVD (for the SDK)
  • a working Linux setup (tested with Debian Squeeze)
  • up to date source for FPC (tested with 2.4.x) and Lazarus (tested with 0.9.30)
  • the Open Darwin cctools (odcctools)

Note: These instructions are for i386 Linux; trying this on x64 Linux has failed. Update 2013-12-13: cross compiling from Linux for OS X no longer works at all for 10.8 and above. The compiler works fine but viable linker tools (cctools for linux) are not available for Linux anymore. Please adjust instructions if you find a solution for this.

STEP 1: copy the SDK from your Mac

You need to install Xcode from your Mac OS X DVD if you've not already done so and copy the SDK to an appropriate location on your Linux box.

I'd recommend MacMac OS X10.5.sdk (compatible with Leopard) but it depends on how far back you want to be compatible. MacMac OS X10.5.sdk is located in /Developer/SDKs on the Mac. I put mine at /opt/MacMac OS X10.5.sdk on my Debian box. Example using ssh from your Linux box to copy over the files:

su - #become root
cd /opt
# all users should have read access to /Developer/SDKs...
ssh appleuser@applehostname "cd /Developer/SDKs && tar cz MacOSX10.5.sdk" | tar xz

STEP 2: grab odcctools from SVN

Odcctools apparantly provide binutils for OSX/Darwin.

On 64 bit Linux environments, fpc mailing list users have problems with this step. Perhaps this StackOverflow question and answer can help: in the configure step, you'd apparently need to set CC="gcc -m32" CXX="g++ -m32" ./configure blah blah blah

aptitude install subversion #if it is not installed already
mkdir ~/svn #store our repositories here, change according to taste
cd ~/svn
svn checkout odcctools

and build it as

cd ~/svn/odcctools
bash #this creates ~/svn/odcctools/odcctools. Fun, right?
#if you do not run it in bash, it might run in a c shell and complain
#about pushd not being there, not applying patches, and all kinds of nastiness.
cd ~/svn/odcctools/odcctools
CC=gcc-4.4 ./configure --target=i386-darwin \
 --prefix=/opt/odcctools --with-sysroot=/opt/MacOSX10.5.sdk
#compile and install if succesful:
make && make install

This installs the tools in /opt/odcctools. I've specified gcc 4.4 but it should be okay with other versions.

STEP 3: rebuild FPC

(my sources are in ~/hg/pascal)

cd ~/hg/pascal 
#if you use hg/mercurial you can see release version:
hg id -bint
 730fd5ffbeb1 16666 fixes_2_4 release_2_4_2
make distclean && FPC=ppc386 make crossall crossinstall \
 CPU_TARGET=i386 OS_TARGET=darwin \
 CROSSBINDIR=/opt/odcctools/bin BINUTILSPREFIX=i386-darwin- \
 INSTALL_PREFIX=/opt/cross \
 OPT="-gl -gw -godwarfsets -XX -CX -Xd -Fl/opt/MacOSX10.5.sdk/usr/lib"

Note that the options (OPT) as shown are vital, especially -gw.

STEP 4: configure fpc.cfg

Add a darwin (cross-compile) clause to /etc/fpc.cfg:

#IFDEF darwin

STEP 5: build the Carbon LCL

Be sure to specify the Darwin OS target, i386 CPU target and, most importantly, add the -gw option. Perform a Clean+Build of the LCL and the Package Registration.

You should now be able to use Lazarus in Linux to build for Mac OS X.


There are two more gotcha's when cross-compiling to OS X:

  • Be sure to specify the -gw in your projects to avoid problems

reported in (the unfixable) FPC bug #12001.

  • Be sure to specify the -XR option pointing to your SDK root (e.g. -XR/opt/MacMac OS X10.5.sdk), or the Darwin linker will try to link to the wrong startup object (/usr/lib/crt1.o).


Fpc Mailing list 6 August 2011 post by Bruce titled "Re: Cross Compiling from Linux to a Mac OS X 10.5 or 10.6 target. How? [SOLVED]" Adapted by BigChimp

Older instructions

This section was taken from the general Cross compiling page and may still be of interest:

  • First you need the binutils for the platform you want to compile to. Download odcctools from this site (use the cvs version) and follow their instructions for installing.
  • you need to create a fake root dir like: $HOME/darwinroot copy at least the /System and /Frameworks and /usr directories (you may have to copy more than this) from your Apple or Darwin computer to $HOME/darwinroot
  • now that you have these files make a folder in $HOME/darwinroot called cross. where ever you installed the odcctools you need to make links for the cross tools to be more fpc friendly. there are a bunch of files from odcc tools called powerpc-apple-darwin-* you need to make links (or rename them) so powerpc-apple-darwin-ld becomes powerpc-darwin-ld, do the same for *-ar and *-as.
  • now you are ready to crosscompile fpc. basically you need to have the fpc source and have a terminal open there.


$PATH=$PATH:$HOME/darwinroot/cross (or whereever you made the symlinks)

type (iirc):

make all TARGET_OS=darwin TARGET_CPU=powerpc OPT="-Xd -Fl/$HOME/darwinroot/usr/lib"

if that succeded you can install it to whereever you want with:

make install TARGET_OS=darwin TARGET_CPU=powerpc PREFIX=/cross/fpc

now copy the file ./compiler/ppccross somewhere you will be able to find it as it's the compiler you'll need to build powerpc programs

  • configure your /etc/fpc.cfg file.

add a section like this:

#IFDEF powerpc
-k-systemroot $HOME/darwin/cross

whenever you want to crosscompile you have to have ppccross and the symlinks to powerpc-darwin-* in the PATH and you should be able to just do ppccross someprogie.pas and it will create a darwin executable.

I may have missed some things (or most everything) as it's been a while since I did this.