From Lazarus wiki
Jump to navigationJump to search

English (en) español (es) русский (ru)

Utilizar hunspell con Lazarus

En esta página vermos la forma de utilizar la librería hunspell con Lazarus. Veremos un esbozo, un modelo funcional pero incompleto. Es casi seguro que se necesitará hacer algunos cambios para propósitos específicos, pero con suerte esta página será un buen comienzo.

En primer lugar, en el foro hay varias referencias a algún código que funcionará con la biblioteca hunspell. La unidad hunspell.pas se basa en gran medida en estos bloques de código. La mayoría no tiene información de licencia y se supone que son "de conocimiento común" y, por lo tanto, libres de cualquier restricción. He agregado un bit que soluciona el problema de encontrar la biblioteca y los archivos del diccionario. Y estableció una interfaz razonable.

Además, el usuario rvk del foro ha creado una DLL de Windows de 64 bits, ya que parecía haber pocas alternativas para los usuarios de Windows

Sobre Hunspell

Hunspell es un proyecto activo de código abierto, distribuido bajo la Licencia Pública de Mozilla. La biblioteca hunspell se utiliza en productos como Libra Office, Open Office y Firefox. Se puede hacer que funcione en Windows, Linux y Mac (y probablemente en muchas otras plataformas). Consulte las páginas específicas de la plataforma a continuación. Los diccionarios de Hunspell están fácilmente disponibles y es posible que ya estén instalados en muchas máquinas. Incluso si no puede acceder a la biblioteca de otra aplicación, puede usar su diccionario.

Los diccionarios de Hunspell vienen como un par de archivos *.dic y *.aff. Por ejemplo, el diccionario australiano consta de en_AU.dic y en_AU.aff. La 'en' indica que es inglés y la 'AU' dice que es específicamente para Australia. Como hablante de inglés, observo que los diccionarios en_US siempre parecen estar instalados y agrego los australianos. No sé qué tan extendido está este patrón en los sistemas que no hablan inglés. Puede encontrar diccionarios aquí https://github.com/LibreOffice/dictionaries y también información relacionada aquí https://wiki.documentfoundation.org/Development/Dictionaries

Note about dictionaries

In some cases in order to display the suggested words correctly the dictionaries must be encoded in UTF-8. If you have notice that some words are not shown correctly--for example, apple in Polish is jabłko but you get jab�ko--it means that dictionary pl_PL.aff and pl_PL.dic must be converted in UTF-8. To convert dictionaries into UTF-8 in Linux Debian (it should work in any Linux, converted dictionaries can be used in Windows-check also this forum thread) follow below steps:

1. Start terminal as root


2. If not yet installed, install hunspell (hunspell-pl is for Polish dictionary--more at Debian Hunspell package)

  apt-get install hunspell
  apt-get install hunspell-pl

3. Go to /usr/share/hunspell/ where dictionaries are kept and create folder dic

  cd /usr/share/hunspell/
  mkdir dic

4. Convert for example dictionary pl_PL.aff and pl_PL.dic Use ISO-8859-2 (for Eastern Europe), ISO-8859-1 (or ISO-8859-15)for Western Europe, ISO-8859-5 for (Russian?), etc.

  iconv -f ISO-8859-2 -t UTF-8 /usr/share/hunspell/pl_PL.aff | sed 's/^SET ISO8859-2$/SET UTF-8/g' > dic/pl_PL.aff
  iconv -f ISO-8859-2 -t UTF-8 /usr/share/hunspell/pl_PL.dic > dic/pl_PL.dic

5. Copy your dic folder or dictionaries from dic folder to your application

Platform Specific


Many Linux distributions will have Hunspell installed by default along with the appropriate language dictionaries. If not, its probably just a case of using the distribution's package manager. If all else fails, grab the source from the hunspell github site and build it yourself. Linux users are like that.

To see if you do in fact have a hunspell library installed, try this command.

 ldconfig -p | grep hunspell

Similarly, you can probably find some dictionaries with

 ls -l /usr/share/hunspell

If that does not work, try

 find /usr -name *.aff

it will take a bit longer ..


Installing the hunspell library on windows is more of an issue. There is apparently no pre compiled 'kit' available and most Windows apps that use Hunspell appear to bind it staticly thus no hunspell.dll left lying around for you to use. But just to be sure, try searching for *hunspell*.dll. The Hunspell github site lists a recipe to build one but it involves installing MSYS2 and is quite involved. The resulting DLL also needs a couple of gcc DLLs along as well.

Fortunately user rvk on the Lazarus Forum has built us a nice statically (ie stand alone) linked DLL using Microsoft Visual Studio Community 2015. As such, you can use and distribute this DLL with your programme subject to the Mozilla Public License.

You will find this DLL bundled with its license file in https://github.com/davidbannon/hunspell4pas, click 'DLL', click the dll file, and you will get a 'Download' button. Don't forget to also get the license file, it should be distributed, one way or another with your app.


The author's Mac appears to have had the Hunspell library installed when Sierra was installed. But maybe, just maybe, it came along with Firefox. I'd like some feed back .... [already installed on Mojave and Catalina]


Nota: See https://opensource.apple.com/tarballs/hunspell/ for source download for v1.2.8.

To see if you aleady have a hunspell library installed, try this command

 find / 2>&1 | grep "\hunspell"

It will run for some time, depending on how many files on your system. It will likely find several files including some in your XCode directory. However, end users will probably not have XCode installed. The one particularly interesting file to me was


Version 1.2 is a bit older than elsewhere but it worked fine. If you don't find a usable library, I suggest you install one using a package manager like MacPorts, Fink or brew. Next issue issue is you will need some dictionaries. Similar command,

 find / 2>&1 | grep "\.aff"

again, slow, it searches your whole disk. I found


And a quick 'ls' assured me that there was a matching 'en-US.dic' files so all good. A more experienced Mac user might like to suggest better search strategies. Please !

The Hunspell Unit

When this page was initially created (2017 ?) I made a serious mistake and used some code that did not have a clear license or history. It has been suggested that by doing so, I breached the Hunspell license as has anyone who has used it since then.

To correct this situation, I have now released a new version of the Hunspell Wrapper that has a quite small part, just the function definitions, with the Hunspell (License: MPL 1.1/GPL 2.0/LGPL 2.1) and the Hunspell Unit (License: The Clear BSD License) in seperate files. From a coding point of view, its almost identical to what used to be here.

Please see https://github.com/davidbannon/hunspell4pas

I have removed the hunspell wrapper that used to live on this page. The one on Github above is a drop in replacement, you need hunspell.pas and hunspell.inc. The remainder of the file make a basic test/demo command line Lazarus project that replaces Demo 1.

Demo 2 in a Full GUI

A Lazarus GUI demo makes a lot more sense and has been tested on Linux, Mac and Windows. But it is a bit harder to copy and paste.

For this demo, you'll need a form with two TMemos, Memo1 and MemoMsg. A button, ButtonSpell, a Tlistbox, Listbox1. Make the following event handlers : FormCreate for the main form; a double click for the listbox and click on the Button.

First you must create the hunspell object and see if it found a library its own way, here is an example in the FormCreate() method ....

uses hunspell;       // get hunspell.pas and hunspell.inc from  https://github.com/davidbannon/hunspell4pas
    Form1: TForm1;
    Sp: THunspell;
    DictPath : AnsiString;              

procedure TForm1.FormCreate(Sender: TObject);
    Sp := THunspell.Create(True);
    if Sp.ErrorMessage = '' then begin
        MemoMsg.append('Library Loaded =' + Sp.LibraryFullName);
        ButtonSpell.enabled := CheckForDict();
    end else

In this example, we are writing some status message to MemoMsg, its an easy way to see whats happening. The ButtonSpell is NOT enabled until the dictionaries have been set. Wait for it ....

We now need two methods, one reads a nominated directory looking for any likely dictionary files, the other manages the decisions. If we find just one dictionary set, use it, if we find none, complain. But if we find several, and thats most likely, we have to ask the user which dictionary (ie language) they wish to use.

function TForm1.FindDictionary(const Dict : TStrings; const DPath : AnsiString) : boolean;
    Info : TSearchRec;
    if FindFirst(AppendPathDelim(DPath) + '*.dic', faAnyFile and faDirectory, Info)=0 then begin
        until FindNext(Info) <> 0;
    Result := Dict.Count >= 1;

function TForm1.CheckForDict() : boolean;
    Result := False;
    EditDictPath.Caption := DictPathAlt;
    if not FindDictionary(ListBox1.Items, DictPath) then
        MemoMsg.Append('ERROR - no dictionaries found in ' + DictPath);
    if ListBox1.Items.Count = 1 then begin  // Exactly one returned.
        if not Sp.SetDictionary( AppendPathDelim(DictPath) + 
            MemoMsg.Append('ERROR ' + SP.ErrorMessage)
            MemoMsg.Append('Dictionary set to ' + DictPath + 
    Result := SP.GoodToGo;   // only true if count was exactly one or FindDict failed and nothing changed

Ah, you say, but where are we looking for the dictionaries ? Sadly, I don't have a good solution for that. Here is where I found mine -

procedure TForm1.SetDefaultDicPath();
    {$ifdef LINUX}
    DictPath := '/usr/share/hunspell/';
    {$ifdef WINDOWS}
    DictPath := ExtractFilePath(Application.ExeName);
    //DictPath := 'C:\Program Files\LibreOffice 5\share\extensions\dict-en\';
    {$ifdef DARWIN}
    DictPath := '/Applications/Firefox.app/Contents/Resources/dictionaries/';
    //DictPathAlt := ExtractFilePath(Application.ExeName);

Maybe, if other users contribute where they found usable hunspell dictionaries, we can build a list for each platform. Or just take the easy way out and tell user to get some dictionaries and put them into the application directory on Windows and Mac. Your thoughts very welcome....

So far, if there is exactly one dictionary set in the indicated directory, all good. But what if there are several ? Our list box has a list of them, if the user double clicks one, they trigger this method -

procedure TForm1.ListBox1DblClick(Sender: TObject);
    if ListBox1.ItemIndex > -1 then
        ButtonSpell.enabled := Sp.SetDictionary( AppendPathDelim(DictPath) +
    if SP.ErrorMessage = '' then begin
        MemoMsg.Append('Good To Go =' + booltostr(Sp.GoodToGo, True));
        MemoMsg.Append('Dictionary set to ' + AppendPathDelim(DictPath) + 
    end else
        MemoMsg.append('ERROR ' + SP.ErrorMessage);

Assuming we now have everything "good to go" we can press the Spell button and trigger this -

procedure TForm1.ButtonSpellClick(Sender: TObject);
    if not Sp.Spell(Edit1.text) then begin
        Sp.Suggest('badspeller', Memo1.lines);
    end else

Memo1 now contains some suggestions for better ways to spell badspeller !

Important ! Don't forget to free up our hunspeller object, memory leaks are evil !

procedure TForm1.FormDestroy(Sender: TObject);
    Sp := nil;

This module will do considerably more but its presented here in its most stripped down form for readability.

A note to people new to Lazarus, methods with "(Sender: TObject)" shown above cannot just be pasted into your source, use the Form's Object Inspector to create the events first, then paste my sample code into the method.

Demo 3 - Lazspell - Tmemo

In this example TMemo component was used.


Lazspell - an example of spelling checker - from https://github.com/Raf20076/Lazspell

Demo 4 - Lazspell 2-version 2 - TRichMemo

In this example TRichMemo component was used.


Lazspell 2 version 2 - an example of spelling checker - from https://github.com/Raf20076/Lazspell-2-version-2

Demo 5 - Simple spelling checker

1. Start Lazarus Ide

2. Click Project -> New Project -> Choose -> Application

  You have just created a new application. Now save it 

3. Click File -> Save as

  Choose a folder where your application will be saved
  First, project1.lpi will be saved, then unit1.pas

4. Place hunspell.pas and hunspell.inc (from https://github.com/davidbannon/hunspell4pas) in your folder.

5. Place libhunspell.dll in your application folder (you can download it from here https://github.com/Raf20076/Lazspell or https://github.com/davidbannon/hunspell4pas) any options or compile by yourself.

6. Place dictionary in your application folder, (two files) like pl_PL.aff, pl_PL.dic. Ditionaries must be encoded in UTF8. You can download them from here https://github.com/Raf20076/Lazspell/tree/master/dict

7. On Form1 place component TButton (Button1) from Standard Tab

8. On Form1 place component TMemo (Memo1) from Standard Tab

9. On Form1 place component TListbox (ListBox1) from Standard Tab (here misspell words will be shown)

10. Click once Button1 on Form1 then go to ObjectInspector, click Events tab, and double click next to OnClik event: it creates OnClick event and paste code (see the code of the whole application) starts from

{Check spelling}
     i : Integer;
     MAX : Integer;
     FillInString1: String;
     FillInString2: String;


//If word is not in dictionary show it in Listbox as an error

11. Go to ObjectInspector and click Form1, then click Events tab then double click next to OnCreate it creates OnCreate event and paste code (see the code of the whole application)

   SpellCheck := THunspell.Create(True);
   SpellCheck.SetDictionary('pl_PL.dic');//Load dictionary
   SpellCheck.GoodToGo := True;

12. Still in ObjectInspector click Form1,then click Events tab then double click next to OnDestroy it creates OnDestroy event and paste code (see the code of the whole application)

 SpellCheck := nil;

13. Then in your code place functions like ArrayValueCount etc

See Below the code of the whole application to compare with your one.

//SpellChecker by Raf20076, Poland 2019

unit Unit1;

{$mode objfpc}{$H+}


  Classes, SysUtils, Forms, Controls, Graphics, Dialogs, StdCtrls,
  LazFileUtils, LCLProc, LazUtils, LazUtf8;

  TForm1 = class(TForm)
    Button1: TButton;
    Label1: TLabel;
    Label2: TLabel;
    ListBox1: TListBox;
    ListBox2: TListBox;
    Memo1: TMemo;
    procedure Button1Click(Sender: TObject);
    procedure FormCreate(Sender: TObject);
    procedure FormDestroy(Sender: TObject);

  Form1: TForm1;


uses hunspell;//place hunspell.pas and hunspell .inc in your application folder
              //from https://github.com/davidbannon/hunspell4pas
  SpellCheck: THunspell;

{$R *.lfm}

procedure TForm1.FormCreate(Sender: TObject);
   SpellCheck := THunspell.Create(True);
   SpellCheck.SetDictionary('pl_PL.dic');//Load dictionary
   SpellCheck.GoodToGo := True;

{Extract words from string: non characters, spaces, carriagereturn aware}

function ArrayValueCount(const InputArray: Array of string): Integer;
{Count elements in array}
  result := 0;
  for i := low(InputArray) to high(InputArray) do
    if InputArray[i] <> ' ' then  // 'between them one space'

function StripOffNonCharacter(const aString: string): string;
{Remove non characters from string}
  a: Char;
  Result := '';
  for a in aString do begin //below punctuation marks, numbers to remove from string
      if not CharInSet( a, ['.', ',', ';', ':', '!', '/',
      '?', '@', '#', '$', '%', '&', '*', '(', ')', '{',
      '}', '[', ']', '-', '\', '|', '<', '>', '''', '"', '^',
      '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '_', '+',
      '=', '~']) then //'„', '”'])these marks make error: Ordinal expression expected, need to be fixed
        Result := Result + a;

function ReplaceCarriageReturn(s: string) : string;
{Replace carriagereturn with one space}
  i: Integer;
  for i := 1 to Length(Result) do
    if Result[i] in [#3..#13] then
      Result[i] := ' ';//'Between them one space'

procedure TForm1.Button1Click(Sender: TObject);
{Check spelling}
     i : Integer;
     MAX : Integer;
     FillInString1: String;
     FillInString2: String;

    FillInString1 := ReplaceCarriageReturn(Memo1.Lines.Text);//take text from Memo1; replace carriage return
    //with one space (using ReplaceCarriageReturn function) and put into FillInString1

    FillInString2 := StripOffNonCharacter(FillInString1);//remove all non characters from FillInString1
    //(using StripOffNonCharacter function)  and put string without non charachters into FillInString2

    FillInArrayWithWords := FillInString2.split(' '); //Split string into words with ' ' one space
    //(using .split) and put separate words into array FillInArrayWithWords

    MAX := ArrayValueCount(FillInArrayWithWords); //Give how many elements are in array
    //(using function ArrayValueCount)

    for i := 0 to MAX -1 do
        if not SpellCheck.Spell(FillInArrayWithWords[i]) then 
    //Take word from array and check in dictionary through hunspell (using SpellCheck.Spell function)
    //If word is not in dictionary show it in Listbox as an error

procedure TForm1.FormDestroy(Sender: TObject);
    SpellCheck := nil;


When you run your application and type some text in Memo and then press the button, the application will check if any errors are found, if found then shows them in ListBox. The main problem was how to remove carriage return and non characters and then how to split text into separate words. It's not an easy task. Therefore there are three functions to do this:ReplaceCarriageReturn function, StripOffNonCharacter function and FillInString2.split , function. The FillInString2.split function actually uses .split function from SysUtils. Hopefully the code of the whole application is self explanatory.

Further Reading and Links